DODGE PROMASTER ODOMETER BLINKS FIXED

[@charlesmears9014]

Thank you for this video. My odometer is flashing after minor front end accident, no air bag deployed. I am getting the "incorrect component installed" error and airbag light is on. So I think this might fix it. I am grateful you took the time to record.

[@raymonddriggers]

How did you resolve the blinking odometer reading? My battery needed to be replaced and I tried to crank my van before replacing the battery and it was nearly dead but it was enough to crank the van but when it cranked barely it cause my ESC and my ABS and my odometer blinking and my ambient air temperature to flat line so all these trouble codes came up on the dash by cranking it with a low battery charge, any information you could give me would be helpful thank you

[@quickautomotivediagnostics8728]

solve the battery problem first and get a scanner to reset the proxy.

[@raymonddriggers]

@@quickautomotivediagnostics8728 thanks so much! I put a new battery in and I will give that a try, Really appreciate the quick reply!

[@Lovelydavid399]

After you did your radio work?

[@quickautomotivediagnostics8728]

Every time you replace any module on new dodge, you need to perform proxy alignment.

[@Lovelydavid399]

Who can help me poxy Aliment ​@quickautomotivediagnostics8728

[@quickautomotivediagnostics8728]

@@Lovelydavid399 yes the Radio worked fine

[@louisbernier2797]

​@@quickautomotivediagnostics8728 if i have replace my radio with a aftermarket if i do a realignment will it stop blinking or only if i put back the oem radio ?

[@quickautomotivediagnostics8728]

⁠not sure about aftermarket

[@jasonmcmaster3939]

I have this same issue with a 15' Promaster City I just bought and the local RAM dealer is clueless about it...apparently the head unit was replaced with another OEM radio and think that is why the Odometer is flashing!

[@quickautomotivediagnostics8728]

Thanks for comment. You are absolutely right, these Promaster need Proxi alignment after any electronic part that is on CAN bus or LIN bus that have been replaced. Please SUBSCRIBE to my channel and if you like the video give it a 👍🏾 like.

[@quickautomotivediagnostics8728]

THAT IS RIGHT. YOU NEED TO PERFORM PROXI ALIGNMENT

[@jasonhooper7682]

do you know where I can get tool to do proxy alignment

[@Lovelydavid399]

I need technician

[@quickautomotivediagnostics8728]

What kind of Tech you are looking for?

[@Lovelydavid399]

My mile was blinking and radio doesn't work

[@Lovelydavid399]

I need help bro

[@littleche7676]

My 2015 promaster start doing same thing also my ac stop working. Climate control has no power. Nothing works about AC or heat... What you thank is the problem?.

[@quickautomotivediagnostics8728]

Is there any component you have replaced?

[@littleche7676]

@@quickautomotivediagnostics8728 no. Everything is original. Nothing added at all.

[@quickautomotivediagnostics8728]

@@littleche7676 You can still do the Proxy alignment and see if it’s gonna fix it.

[@littleche7676]

@@quickautomotivediagnostics8728 I took it to the dealler today. Lets see what they gonna say...

[@jetmelt]

umut kosmaz what was the fix for you promaster?

[@darkstardan3309]

Umm, not helpful if you do not have that $3k device :P