Dodge Seat Belt Repair

Thank you for coming to this channel, I hope that you keep up with the videos I post,please Subscribe It really motivates me to make videos Like: Favorite , and share your learnings with those that need to hear it. Your comments are‘ my oxygen, so please say anything you'd like to discuss🙂 and if you need any TUTORIAL VIDEOS FOR YOUR CAR Let me know in the comments below!
ATTENTION:
All Videos for Educational Purposes only We are not Responsible for any Accidents or Injuries.
TO SUPPORT MY CHANNEL
Donate via paypal to [e-mail]
SOCIALS
Instagram - @nakfixanycar
Facebook - / fixanycar1

[@FixAnyCar]

TO SUPPORT MY CHANNEL Donate via paypal to www.paypal.me/tipgiving

[@jabraan1360]

I just did this and for anyone wondering the seatbelt still lock up when pulled so that function still works.

[@kayakesq]

My nephew had a head on collision with a drunk driver in his new Jeep and the belt almost killed him. Tore his intestines into pieces apparently. He lived but is very messed up. I theorize the belt was maybe twisted into a rope rather than flat, was high on the belly rather than Catching the hips . I would Love a 5 point wide belt system. The drunk walked away btw . Still. I thinknthisnrepairnisnablutnas safe as new . Best would be a race type system

[@JodianGaming]

Is this a "repair" or does it actually completely disable the seat belt safety lock? I have a belt that's engaging the safety lock even during light pulling (in other word, it only retracts) and I don't wanna pay the $600+ that I was quoted for a new belt, self installation.

[@diegosolar678]

this video doesnt look good for the car safety features

[@sasivo1]

Seat belt developer here: This is NOT a repair! This seat belt has already been in an accident. I can see that because the balls are inside the tube until the car crashes and pretentioning takes place. So this will not work a second time (like an airbag). Also the seat belt might have cracks from the impact and there is no guarantee that it can withstand a second impact. And most important: the guy removed the sensor that detects when the car is tilted and heavy acceleration and deceleration. You will need that in an accident! The gears he removed is the child safety system. If you pull out the webbing completely, it can be only pulled in again. As soon as you reach a certain position it can be pulled out again. This is to fix child seats to the car

[@sasivo1]

@@fjm6104 Even safety restore does not repair the seatbelt. I have seen "repaired" seatbelts perform in a crash test and the results were shocking: separating parts flying around and a performance that is not compliant to legal requirements. Also the repaired parts do not run through a homologation process. Be careful with these kind of services and respect that a seatbelt is not made to perform two times, neither is an airbag.

[@Bandit69ply]

I called the dealer for my 13 Dart and was quoted 400 and change. I've never had a seat belt lock up like this one has in any vehicle I've ever owned.

[@5.7jones58]

Dose this method stop them from locking back if you get into another crash or will they still lock back ?

[@jeanemileduboudin-noart.6100]

No !!!

[@munthermunther1030]

Thanks a lot brother 😎

[@cristiancorona8839]

Did u connect the sensor

[@TurboGamingTvv]

What all tools u needed for this

[@FixAnyCar]

Please Subscribe if you like the video, that will help me alot👍😊

[@InfamousTemper]

hello so my dodge charger scat was in an accident there's no need to get a new seat belt retractor?

[@adrianledezma1253]

I need to do the same thing to my car it’s a dart dodge 2015 you think it we’ll work ?

[@Bandit69ply]

Did it work?

[@robertogutierrez5269]

Que pasó con las postas?

[@motorhead915]

Was that a Dodge charger? I need to do the same thing on a 2012 Challenger, any suggestions?

[@FixAnyCar]

Jesus Rivera yes it’s Dodge Charger...Dodge Challenger 2012 almost same jst little different... please subscribe hopefully video get soon

[@motorhead915]

Just did that using your video, same procedure, thanks a lot man you are great.Also a friendly advice, try adding commentary as you do your work, its more effective than just pointing the bits that your are working on

[@gumie3579]

This doesn't work on a 2002 Dodge stratus. The seat belt is not the same, the trim connections are not the same. Just an FYI

[@filomartinez247]

as simple as that wow, thanks for video....worked great.

[@nanoale863]

Don’t do this because then it won’t lock when u crash

[@JoseLopez-tp2ns]

Pregunta el cinturón vuelva a funcionar en un frenon o solo esta desbloqueado?

[@motherrussia7456]

Will the work on a chrysler?

[@mememetal666]

Is that a torx 50?

[@RAlbertoGarcia]

I asked myself the same question. I had to pause the video frame by frame and I could see that it is a T-50.

[@robertogutierrez5269]

What hapen for the balls?

[@zulkifliahmad2510]

Bearing dlm tu kena buang ke?

[@harinderkuhar434]

Can we change one car seat to another car

[@andrepredelus1958]

how to do a dodge avenger is it the same thing?

[@carlosbustos5403]

Cómo apagar el testigo del cinturón

[@liccastillotorres]

Journey?...

[@angeldiaz-gw4ol]

Need to do this on a 2007 Chrysler 300 but it looks a little different...can any one help?

[@MA-lb4sm]

Where u located at?

[@facethefire5]

How do you Reset the Airbag Light after a accident?

[@FixAnyCar]

facethefire5 please subscribe for upcoming videos hopefully video get soon

[@iraqi1759]

🌹

[@angelaarenas148]

Y las canillas

[@MrSahmawi]

It does not lock and is not good for safety

[@DJONDOtravel]

привет друг

[@davetrevino5389]

Yeah don't do what this guy did. Seatbelts aren't for decoration... Should be pulled from KZbin.

[@jerryvallespin1712]

gomagawa po kayo set bilt po