Dodge Truck Front Shock Replacement | 2WD Dakota

[@BoostedMotorsports]

Here is the REAR shock replacement video 👉 kzbin.info/www/bejne/eHnPlaB6epykiKM

[@dennisconnolly1]

Thank you bro ..

[@robrich6988]

Yeah all DIYers have lifts!

[@d_dizzie_druck5753]

have to mine, broke both front bottom bolts off, & this video now shows that the bolts iam missing come on the new shocks already🙂....or @ least i hope so🤣

[@Bmanfresh]

Depends which two bolts your missing. If they are the 10mm ones. They do not come with the new shocks. If the ones on the top of the shaft mostlikely those will be with the new ones

[@usedsocks89]

A whole lift inside the garage... nuts lol Thank you for the vid

[@pedrobisono747]

Ok look at that thanks it’s helpful

[@raymondpauze8801]

For us up in the rust belt, just grab the appropriate socket on the top bolt with a 6 inch extension and just wiggle it back n forth till it snaps and done

[@michaelmurphyjr.5371]

But what if that too little bolt of the shock gets stripped cuz you thought it was loose?

[@dtruth5769]

Are they stronger than kyb mono max?

[@johnruble3454]

Haha old video but im replacing my front shocks thanks for the help bro

[@qzorn4440]

very nice... change can cause pain n-the... with different parts...:/ have fun, thanks...:) you make it look ez

[@rtmadman3418]

Nice straight forward vid again

[@bobbyboucher1227]

Thanks!! I really needed the help on how to do the shocks on my 04 dakota.

[@smob6969]

Very nice Dakota. I've got three. But no badass boosted Dakotas lol.

[@GTOFan350]

Ahhh....a dakRT video! All is right in the world

[@BoostedMotorsports]

Haha order has been restored 💪🤣

[@rtxrt73]

And that's why I'm happy I have the air suspension on my Ram.. only had to swtich out the rear shocks because the front are air shocks that are not meant to be replaced..

[@mitch5077]

Was those headers a pain in the ass to put on?

[@cristobalmorales1810]

Is this the same steps for a 2001 3.9 dokota?

[@ElectronicsForFun]

Of course it's a 10mm socket. I don't have one of those.

[@derekprice5510]

The poly bushings will squeak, When I replace mine a few years ago I ended up adding some grease fittings and now I shoot green slime marine grease in poly bushings to keep them from squeaking.

[@sunshinesallday]

Great video. Looks easy!

[@BoostedMotorsports]

Piece of cake! 💪

[@charlessterling6579]

At first I thought these trucks were going to be hard to work on but these trucks are rather easy to work on it's just finding parts if you can't find the parts what do you do so now I'm in the process of frankensteining

[@sunshinesallday]

@@charlessterling6579 nothing wrong with that. It’s called customizing. 😂

[@raymondbaumann2405]

What no rusty bolts.......

[@charlessterling6579]

I have an issue with my Dodge Dakota I have a 1998 Dodge Dakota Sport club cab two wheel drive it's got the 39 motor in it I have an issue with my front steering nobody makes the parts for me to get a steering knuckle nobody I can't find a steering knuckle anywhere I want to know how hard it would be to transfer and replace the whole entire front suspension steering and everything over to a Chevy S10 if it's possible to do that way I can buy parts for my truck because I have a plan for this truck nobody's ever done this before I guarantee you when I'm done this truck's going to be on KZbin

[@chris5108]

So... does Jonathan have a channel? The more mopar content the better.

[@BoostedMotorsports]

Sure does!! Here is the link to Jonathan's channel! kzbin.info/door/rn-t6f9XPczwab2idyKE0g

[@stevem268]

the last generation of dakota is totally different! its a coilover shock setup

[@stevem268]

@@stillnotwoke my biggest issue was the long bolt through the big bushing at the bottom, what pain in the ass!

[@JohnTaylor-kh1sv]

Did you get your s2000 back from leave it lose Jonathan😃😃😃

[@sunshinesallday]

🤣

[@DCPDEREK]

has the engine been updated.. or is it still fukd?

[@BoostedMotorsports]

We replaced it! Check out the vid on that its funny! 🤣

[@RED2K2TIMMY]

Do you have any advice for us new guys who would like to film ? How do you edit and what do you film with ? I’m building a 2014 ram like yours

[@willr69420]

Just feeding the algorithm, baby.

[@BoostedMotorsports]

💪💪💪

[@DarrensTruckzs]

Ummm Is It Tight .. jonathon.. better recheck it jus in case jon 😂😂

[@BoostedMotorsports]

Probably not if jon tightened it 😂

[@sharktale207]

If you had to choose John a thon or jazz 😂😂😂

[@JazzysWorld]

Mark Rocha both!! Lol

[@sharktale207]

Keeper she didn’t make you choose 👌🏽👌🏽👌🏽

[@chrisclutchturner]

Great video! I have a (2wd) 99 dakota 5.2l v8 and its so hard to find videos with a replica truck, so this channels refreshing to say the least. Also wondering if you had tips on getting out the oil pan? I have a rear main seal leak on mine now that I'm going to attempt to fix :( appreciate it!

[@saleen281281]

ohhh shittt, here we go again, the butcher is back, LOL, double check everything john.

[@jerryflores3634]

Is it tight! Lol

[@BoostedMotorsports]

Probably not since we let Jon do it 😂

[@bdogjr7779]

Awesome BM《☆》Nice work fellas👍🏾The bushing replacement should be interesting :*: Greetings from🌐Florida🤳my friends🤓🗣🔊☮✌👍🏾

[@Backyardjackleg]

Make sure YOU tighten them. 🤣

[@BoostedMotorsports]

I did! They were still loose from Jon last time when we did the front suspension 🤦‍♂️

[@Backyardjackleg]

@@BoostedMotorsports 🤣

[@chuckrockhold6735]

S a