Does Your Trailer Need Brakes?

[@davidfrank2824]

This video has perfect timing. I'm getting ready to buy a used bass boat. The person who selling it has disconnected the brakes. He told me that the boat and trailer belong to his father who's no longer with us. He said that the brakes had frozen up and he took it to a shop that supposedly wanted $1,000 to fix the system. I've done trailer brakes in the past and I thought perhaps the price of the parts must have gone through the roof. I used the link in the description to go to the parts website that you suggested. I did a rough guess on what I would need in a worst case scenario. Worst case replacing everything it's still came out from under 500. And that's not even myself putting the discount code in. Thank you for this information it really helps. I was second guessing myself about buying this boat since I would need the brakes to work to pass inspection. Once again thank you and as always I make sure to hit the like button and I have already been a subscriber for a very long time. Look forward to watching your next video.

[@StephanePortmann]

I do not have brake on my trailer, that's why I looked at your video ! Great work, really useful.

[@johnhamilton9229]

New to your channel and I thought I would watch a few of your early videos. I am enjoying your style. Your diction is clear while you describe and show the actions. Did your history of boat work start with the boat yard in this video. My first job was a marina in Ft Lauderdale👍 Florida. Then the Coast Guard. Keep making them and I will get to them all.

[@vladmirputin7139]

WOOHOO. bornagain10 still works, just saved $150 on my order. Thanks man. Big help.

[@fachu2]

Its funny I have done this job a few times but still watch you do it. Thx for keeping content going. Cheers!!

[@KnotMyProblem]

Thanks for the boat trailer parts website! Had no idea they existed. You the man!

[@beaulster]

Vantage dual axle trailer that had drum brakes when I bought it used. They worked until one season they locked up, while the boat was in the water for the summer & trailer was sitting. I think only one axle had brake drums. I removed the drums and just put idler hubs on. Over the years I’ve gotten more familiar with swapping races/seals/bearings. Now it’s an annual check since I’ve lost a wheel in transit due, back roads, to never checking them. I learned the hard way. I’d like to put brakes on there again one day. Great video! #snapon

[@MrOrnan]

I have a dual axle trailer and need to replace the brakes. This video is very helpful. Thanks

[@yovanrosario817]

My EdgeWater use to have a trailer whit breakes but pass summer just give up less than a mile from home, sure since I see your videos I feel more than capable to repair that trailer that I still have in the yard.Love the videos keeping coming excelent job. #SnapOn

[@JLK1978]

Just bought a boat and the previous idiot took all the brakes and actuator off the boat trailer. Now I have to buy all new stuff because the boat is pretty heavy from my truck. I appreciate the video for my new adventure.

[@twanger1994]

My new to me 5 star tandem trailer had surge brakes. However they needed work. The previous owner removed eveything. Now I'll have to start from scratch. Glad to see this video, it will be very helpful. #SNAPON

[@chrisanderson7949]

I'm trying to put together a set of tools to have on the boat at all times to make repairs on the water. Have you ever made a video on what you think the necessary tools every boater should have on their boat? Thanks!

[@BornAgainBoating]

Here's what I carry in my toolbag, it might give you the right direction: kzbin.info/www/bejne/a5yUaGemdripm8k&t

[@motorv8N]

Best video I've seen on the subject. Our little 18 footer doesn't have trailer brakes but I've always wanted the peace of mind added stopping power brings. Might see if the calliper brackets can be welded on somehow vs ditching the entire axle. In any case this vid gives me the confidence to tackle it. One note about blocking stuff. Don't use those hollow cement blocks. They can disintegrate instantly when overloaded, dropping whatever is on them to the ground with zero warning. That trailer in your video won't be much risk but boats and cars are another story. Steel jack stands or heavy wooden timbers only.

[@rileyshane78]

Don’t do it? They last less than a year. I just took them off our robalo r200. Even if you clean the trailer religiously after every use you will only get a year or so out of them before they lock up and you can’t use the trailer at all till fixed

[@thisismyalt9010]

I work on more cars than trailers and prefer pressure bleeding vs vacuum. The ARES 70921 works great. With the adapter set. Thanks for the vid.

[@BornAgainBoating]

Thanks for the info!

[@scottsmith2869]

I have drum brakes on my boat trailer. I want to upgrade to disc brakes. Thanks for showing us the right way to do this. #SnapOn

[@garviere]

How is the brake fluid apportioned to give the right pressure compared to the travel in the actuator to operate the brakes efficiently yet not lock them up? I'm asking because I am contemplating making a trailer out of a chassis cab truck. I see there are various hitch types available with brake actuators in them but all seem to have a short travel compared to the foot pedal on a car which of course you control by feel. I just wonder if the travel required in the slave (wheel) cylinders of the truck will be too far to operate properly with such a short trtavel in a trailer hitch actuator. Your thoughts please. (or any one else out there) Many thanks Guy.

[@wraithconscience]

Hi BAB, As usual, an excellent, informative, beautifully organised video. Thank you. Wishing all at BAB safe and happy holidays ! God Bless !

[@BornAgainBoating]

Thank you!

[@GALowe]

#Snapon, Recently bought a new (to me) boat and trailer. The brakes were shot. I'm planning on installing new ones this spring. Thanks for the video. It's given me the courage to try it myself. Thanks.

[@HairyLoveHandles]

Awesome video man, this is such a gold mine of information

[@specknred19magee9]

What’s the cost to do this installation ? Just one axle. Thanks Great video

[@stuarthennessy8551]

Most of the trailer brakes here are all mechanically actuated using sealed cables like huge bike brake cables. When one of the cables are due for a change you don't have to play around with hydraulic fluid bleeding. Most of them are also drum brakes. There are also bearing buddies for keeping the water out of the bearings for longer life expectancy. #SnapOn Thanks again top info

[@NoNopeAndNo]

Yes I have only had the direct cable type myself.

[@geronimopascuale9208]

Hi Stuart Hennessy. What kind of brakes would you recommend on a 5200 lb Axel Utility Trailer? Cheers

[@mchurch3905]

I'm assuming this same retro kit is available for electric brakes?

[@TheDoug9901]

I used BUICK DRUMS they fit right over the original hubs mounted the backing plates if I braked too hard they would lock up with 24 ft boat on it they really worked well with car brakes. If I did it again I would matchup disk brakes to fit right over original hubs and do the same thing.

[@andrewhatton1606]

I done this to my car trailer and I love it I can lock the brakes on the truck and the trailer as well thank you

[@vetdoc35]

In Florida i never ever heard that! Here in Pompano every WE i see hunderts of Trailers all without Brakes!

[@factionfx]

Excellent video. Those springs look like they are toast. I'm guessing these disk brakes are a lot better for salt water conditions than the standard drum electric brakes?

[@DJSbm-28]

#snapon. Yup you guessed it brakes are shot on my dual axle trailer. The lines are rusted away and the axel is going have to be replaced. So the timing of your video is great. I didn’t know about the weight of boats and trailers needing brakes. Luckily the ramp is only a few minutes away and I have been pushing it. I do want to go south maybe the keys this summer with my grandson so I will have to get this job done. Any information on oil bath hubs would be great. I have already done the rear axel but they don’t have any brakes, just the front axel. Thanks again and keep it up. 👍👍

[@BornAgainBoating]

Awesome! I don't know enough about the oil bathed hubs to say yeah or nah :/

[@jrem4283]

Hey buddy, I have a new gooseneck with tandem 7k axles with electric brakes. Do you recommend upgrading the brakes and if so to what? Thanks, J

[@chuckhamer2919]

I am in process of repairing UFP A-70 brake actuator. I think my master cylinder is bad. Would like to see you test the old and new master cylinder to verify proper operation of the master cylinder

[@mchurch3905]

Good job. How about those rusty leaf springs?

[@sideshowhomer9056]

Snap on. Those engineers at snap on are so current with new tools. Real nice third option. Can’t tell you how many steel lines I’ve ran and coupled in the old Days. My 2015 170 montauk does not have brakes. It’s way under the legal minimum weight. Also no more flushing drum trailer brakes of salt. Thanks. Rich

[@semajaytruth975]

Question is, how much does a double axle brake kit cost and how long will it hold up in Saltwater?

[@johnb3651]

I don't have brakes on my trailer but I used a bearing grease repacking device when I replaced my bearings a couple of years ago. I think this is a must have device to ensure that the bearings are sufficiently coated with grease otherwise there may be a higher chance that the bearings may fail due to lack of grease

[@officialWWM]

John B people have been packing bearings by hand for years. It works fine.

[@mikeprince5459]

Currently I have trailer brakes that need to be replaced. Will definitely check out that site and look for a kit to replace everything. Thanks for another great video! #SnapOn

[@conorfabian7386]

InstaBlaster

[@crispychris9492]

This video should come in handy if we ever decide to put new brakes on. Everything is so corroded I don’t even know what I would need to replace. We’ve left it the way it is because we trailer our boat twice a year and it’s a 10 minute drive so it’s not really worth it. And how much was it for all the parts for a trailer you bought?

[@axscdvfb]

What’s your opinion on stainless brakes? They are so expensive? Worth it?

[@BornAgainBoating]

I think it depends on your application and the use. If you are in saltwater and dunk the boat quite often, stainless would be a good way to go, totally way more expensive, but in the long run, it will last longer and be less problems. Also you should invest in a garden pump sprayer and mix up some saltaway and fresh water and spray them down after dunking before boating, and after reloading the boat. But if you are in fresh water and only splash a few times a year, probably not worth it for the money

[@jaepark54]

Good video, Hi I have One question do you need brakes on both axles? My trailer only have set on front axle.

[@OfficerDave78]

#SnapOn my first trailer had breaks and they are great when your going to stop. You would never know your stopping with a boat on the back. My new trailer will be a triple axel. That’s going to be fun. Another great video !!

[@craigmonteforte1478]

Very good video with all the details , I have had many trailers and do my own service and repairs I’ve thought about putting electric brakes on a couple of trailers in the past but have not done it yet yes I’ve bought trailers with them equipped with the brakes and I’ve done my own safety checks and adjustments my brother in law is a Chef by trade not extremely mechanically advanced and he used to get Buddy Bearings installed on his trailers and pump Grease into them way to often when the trailers got warm the grease would expand and shoot his Buddy Bearings off the axles all the time they would hit the pavement spinning faster than the car tires and pass the tow vehicle on the highway ?

[@stevenmarcouillier2531]

just bought the rotors and brakes but bought wrong rotors need the rotors with the bolts in with the rotors can i just buy the hubs to fit

[@benalbrecht]

Is there a way that you can install brakes that brake when the tow vehicle brakes... like while going up and down boat ramps

[@doug2202]

How does the Kodak brakes hold up to salt water . Looking to completely do my trailer brake system for my 31 boat trailer and add brakes to an axle? # snap on. Thanks, great video

[@BornAgainBoating]

Well, depends on what kind you get. You don't want to get the cheap ones, get the ones that have that blue coating on there. I think there is even a better grade than these, but from what I can tell these hold up pretty well. I really don't have that much experience when it comes to time and longevity, but I would say to call up boattrailerparts.com and they will be able to help you out and give you a lot more info than I can :)

[@gerardvandijk2917]

Nice video as always! Very educational. That #snapon bleeder looks nice. Maybe when my mightyvac breaks I’ll have to check that one out on the tool truck

[@BornAgainBoating]

It's expensive! I have a friend that has one so I just borrow his lol ;)

[@BornAgainBoating]

Congratulations @Gerard VanDijk you're this week's contest winner! Shoot us an email at [e-mail] with your shipping info and we'll get your #snapon charge pack to you! Congrats!

[@gerardvandijk2917]

Awesome!! Just sent a email a little while ago

[@andrewfyakim525]

Thank goodness I have a new trailer! (Only use it for hurricane haul-outs).... Thank you for all your great videos... #Snapon.

[@Mike70359]

Can you convert the axle with grease zerk into buddy bearing system?

[@BornAgainBoating]

Yes, just install the buddy bearings and pump in the grease :)

[@ernestvasquez3216]

Very helpful I'm in the market for new breaks upgrading

[@erikrounds5847]

I have to fix the brakes on my trailer and when I saw you start this series I couldn’t wait to see you fix yours! #snapon

[@geoelhandyman7803]

I have to put the brakes back on my trailer...I am towing with out them..I definitely feel it.snapon

[@Rubbernecker]

Man, your content is so good.

[@BornAgainBoating]

Thank you!

[@petarsasic5124]

great video for installing a new set of brakes , but would need some help with an existing continental trailer with disk brakes , kodiak 225 calipers and cannot compress the piston into the caliper . #SnapOn heading to Islamorada next week

[@Fireship1]

My brakes are old drum type surge brakes that have been disconnected since I owned the trailer. It’s a dual axle sea lion. I’d probably be better off replacing the whole setup like you show here instead of trying to patch up what I have. Future credit card project! #snapon

[@jb9090]

What do you think of electric brakes?

[@nobletwosix1806]

I sadly don't even have a boat. I'm working on it through! Probably wont have breaks on it because I'm not looking to get a big boat, but this is very informative for the future! #SnapOn

[@scottward8038]

Yes my trailer has trailer brakes. I pull a Mcclain trailer built in TX with a 2102 Nauticstar, love the trailer with the saltwater package, SS fastners and led lights. Thanks for the great video! #Snapon

[@joem2231]

Love the videos. No brakes to mess with on my Boston whaler trailer. #SnapOn.

[@bradportier5096]

Where is the best place to shop for water tight boat hatches for aluminum boats?? Price is key..

[@BornAgainBoating]

With price being key, probably amazon :)

[@fishfinder4]

would this apply to switching from drum brakes over to disc??

[@factionfx]

Pneumatic bleeder is the way to go. $30 at harbor freight. Have replaced fluid in several vehicles and ATVs with it.

[@raybates3119]

No brakes on my trailer with a Mako 282. What Kodiak system did you install in the video. I didn't see a link for the parts . #SnapOn

[@BornAgainBoating]

www.boattrailerparts.com/Kodiak-Koda-Guard-Disc-Brake-Kit-Slip-On-6-Lug-5200lb-wHubs_p_1146.html We put that set on

[@raybates3119]

@@BornAgainBoating Thanks. I'll check it out!

[@mrzif0013]

great vids! i have a definate kunk sound when i stop or start sound from the bract acuator. i took it apart and replaced the shock and it is happening again, any advice?

[@6speeddakota]

No trailer brakes needed on my classic 1959 Glasspar. Fully loaded she only weighs about 650 lbs. I did however have to put a new axle and springs underneath it due to an unfortunate wheel bearing explosion, and a discovery of a very broken spring while attempting to replace the axle. #snapon

[@jamesm568]

I have a 21-foot boat and a 16 foot car trailer that never ever had trailer brakes on them as it was purchased that way. Even my camper trailer never even came with trailer brakes nor ever had them installed and had no issues. When those trailers were purchase trailer brakes were not required by law.

[@officialWWM]

James M once you have had a trailer with brakes, you will never go back. It takes a lot of load off the vehicle.

[@BackyardBeeKeepingNuevo]

Many thanks for your video and discount code. You saved me a bunch of time and money and I am grateful for you and your channel. Thanks - Beeman John & Miss Honeypenny

[@BornAgainBoating]

Awesome! Thank you, you are welcome!

[@bobfleury]

Awesome video thanks for making this available 😎👍🏻

[@meecaman]

#snapon...great video. I only have brakes on one axle. Now I know what it takes to add a second set. Thank you

[@lb7wade518]

Great job on the info!!

[@rilla46]

I have a 25ft Continental trailer duel axle and it looked like the trailer never had brakes on the axles which is weird since the trailer itself is 1500lbs

[@fishyhobby3697]

Nice work, great video!

[@servantofchrist9369]

Nothing like getting grease all over the rotors…

[@ELANSURF]

Danger- (first, your videos are top notch for entry level advice!) Using cinderblocks is the only big mistake I've seen. They have no internal structure, can split or simply be crushed without warning. Quite a few have died and lost limbs using cinderblocks. Jack stands are so cheap these days. . . by the way, your video inspired us to look at putting breaks on for our 26' CC's trailer.

[@tomrolando6115]

I just got my boat out of storage today and brought it home to get it ready for the season. I always check my brake fluid because I had a brake failure on my first boat. Even though we are on lock down because of the COVID-19 I feel we will be OK in the middle of the lake with some wine and food. #snap-on

[@christophergibson1995]

Just got done redoing my trailer brakes. Love your videos keep it up my friend #snapon

[@edmullins4519]

Just replaced my axles with heavier 6k ones, previously had hydraulic surge brakes on one axle but did not reinstall because of constant problems sticking, looking to upgrade to electric over hydraulic when I get the funds! 😮 #SnapOn

[@officialWWM]

Ed Mullins try a cable setup. They work well.

[@mattnichols1241]

25’ Hydrographic Survey Armstrong Marine with Electric Over Hydraulic Brake’s. Great for the Mountains. Surge Brakes catch on fire! #Snapon.

[@IBOutdoors]

A local marine shop wants $9000.00 dollars to put new brakes on my trailer and rewire some of the lights on my trailer for a 21' boat. Am I crazy to think that is absolutely outrageous? Then to just change the bearing they want over $1200.00. Located in Southern California.

[@tjcdiy]

I just completely rebuilt my drum trailer breaks! I'm waiting for a decent day for a test pull. #SnapOn

[@JoseRivera-ko5uo]

Thank you for the video 🤙🏻

[@franciscallahan4213]

Do you have to install brakes on both axles or can you get away with brakes on just one axle?

[@BornAgainBoating]

Depends on where you live I think, one axle is fine in most places but some places want them on both :/

[@Captain_Nunez94]

Yr the best DIY help ever bro

[@cooletti]

Kickass how to video. keep up the good work. I have an old triton trailer. It has trailer brakes. #SnapOn

[@gklenik]

Getting ready to do a bearing refurb and brake bleed/check on my single axle Bayliner trailer. Thanks for another good video! #Snapon

[@bottomknockinbaja6092]

Im still on a 25 footer so only one set of brakes for me and fortunately my trailer came with disc!👍#SnapOn

[@brandonlure2738]

Where are the part numbers for all the parts you used in this video?

[@xlandscaper]

Great content. My loadrite has brakes but only on one axle. Seems like the cheaped out somehow😕#snap-on

[@cwgoforth]

Awesome video, thank you!

[@BornAgainBoating]

My pleasure!

[@vladimirkarathanasopoulos6469]

Every video you make is a mechanics bible..keep the good job done!!by the way i have no boat neither trailer but that #SnapOn gadget will be handy!

[@Hallowsaw]

My car is rated for 1k lb with brakes but can tow 3000lbs with brakes according to the manual. You know how hard it is to find a 3k gvwr trailer that you can install brakes on it?

[@brandoncurry6682]

#snapon. I work on boat trailers quite often and the brakes are one of the most common things to be neglected when it comes to maintenance.

[@natekowalczyk5130]

I need to rebuild my brakes this season. Nice to know the loan out bleeders! #snapon

[@jeremyrowe4339]

I have an old Performer Trailer that had them but it’s like every year the saltwater freezes the brake pads together. I took them off but would like to have some, I just have to take it easy and have plenty of room in between vehicles. #SnapOn

[@davidd8435]

#SnapOn no brakes on my trailer boat not heavy enough. But I know where to go if I ever need to install some. Thanks

[@nickdehaan4715]

JIC fittings do not require Teflon sealant.

[@bwagenberg]

Wheel lug nut torque??

[@BornAgainBoating]

Depends on the size of the lug

[@garybramlett8395]

Big Tex 5 ft x 10 ft. Dexter 3500# axle has flange for brakes, but not installed. Future upgrade. #SnapOn.

[@elms1319]

Nice video thanks

[@ronaldbarker9861]

I have a dual axle trailer with electric brake system that need to be replace.

[@santysardinas3909]

#SnapOn Thanks guys for another great video my boat trailer came with break but they was disconnected because super corroded I'm planing to replaced then so thank you for this. 🙋

[@josephhill702]

brake laws vary by state. some don't require brakes at any weight

[@joelafrite7850]

Super helpful, thank you. I had no idea how straight forward it is. #SnapOn

[@JonUzarski]

Thanks! Just bought this kit for my Grady White trailer. #Snapon