Nice. Let me know if you may need automatic machine for iit, or if you have it already ;)
@leonardototo60339 жыл бұрын
Hello, Could you please tell me what air compressor are you using for that dispenser machine ?thank you in advance for you help !
@TheRoundBox8 жыл бұрын
May I ask... -For these sticker, I take it you use a soft resin...right? -For a car emblem sticker, since it would be 'weather exposed', would the product to use be a hard resin?
@Logo3Doming8 жыл бұрын
+Hi You can use hard or soft/flexible resin. These resins are uv cured within 15 minutes under uv lights. We offer four different doming resin for various application. If you are interested we can provide you with small 2oz bottles of each, cost is $40. Regards, Logo3Doming LLC
@rudykoszkul23746 жыл бұрын
Our 3D doming resin, available in rigid dome finish or soft/flexible
@easyshopstore2330 Жыл бұрын
what kind of printer do you use?
@ayokunleadewale3895 жыл бұрын
please am interested in your products and i have gone through your site. but my question is how do i get the sticky material that will be a base on which i ll dome on. for instamce if am doing a 3d car sticker how do i get the sticky base that i ll print on? thanks please i need a prompt response please
@Logo3Doming Жыл бұрын
www.logo3doming.com/
@paolopicardi765026 күн бұрын
Ciao puoi stamparmi degli adesivi? Dove possiamo contattarci per metterci d'accordo?
@roytj32713 жыл бұрын
is it 1079 resin type ?
@ayokunleadewale3895 жыл бұрын
Also for some that i have seeing online, they use a ma chine that mixes the hardner and the polymer together but in your own case i could not find it there?
@rudykoszkul23745 жыл бұрын
Our resins are 1 component, meaning there is no mixing. Shelf life 1 year. visit. www.logo3doming.com or contact us +1 203 979 8714
@sergioknuf3 жыл бұрын
@@rudykoszkul2374 what about yellowing time
@Logo3Doming3 жыл бұрын
@@sergioknuf "Crystal Dome" resins (hard & soft/flexible) never yellow or discolor
@sergioknuf3 жыл бұрын
@@Logo3Doming it ss $450 for a gallon holy ! Can you make a 24 or 35 oz
@raheemraheem73276 жыл бұрын
What chemicals used for this ?
@inktekmexico12 күн бұрын
20 minutes!!!! A lot of time. UV resins in a couple of minutes are ready.
@kajaljalandhar81765 жыл бұрын
How to use any cemicals uv, epoxy use share plz
@sergioknuf3 жыл бұрын
What printer do you use for small prints
@Logo3Doming Жыл бұрын
www.logo3doming.com/
@Logo3Doming9 жыл бұрын
any small compressor will work.
@normaenriquez3837 жыл бұрын
where I can buy liquid, and please tell me which kind of resin do you use
@Logo3Doming7 жыл бұрын
Hello, we offer 4 different doming resins: rigid, soft/flexible, HIGH DOME soft/flexible and 5D soft/Flexible, ideal for outdoors. Our website: www.logo3Doming.com or email us info@logo3doming.com
@normaenriquez3837 жыл бұрын
which use is each one do you mention, example :HIGH DOME soft/flexible
@Logo3Doming Жыл бұрын
www.logo3doming.com/
@NameName-eq7oe5 жыл бұрын
What keeps the resin from going outside of the logo edges? I don't understand
@rudykoszkul23745 жыл бұрын
Surface tension
@NameName-eq7oe5 жыл бұрын
@@rudykoszkul2374 Does it have to be perforated?
@rudykoszkul23745 жыл бұрын
it needs to be cut or "kiss-cut" on on vinyl cutter. Dispensed resin stops at the cut edge and held by surface tension.
@cesarchicas52733 жыл бұрын
The tensión are important,but the type of ink.some ink reject the resin
@Logo3Doming Жыл бұрын
www.logo3doming.com/
@ericweiler11947 жыл бұрын
This is the coolest thing in printing out right now. Not many people know about it, which makes it a huge opportunity for digital printers!! I want the dispenser... I want the resin... I want it all.
@Logo3Doming Жыл бұрын
www.logo3doming.com/
@clicktostudy5 жыл бұрын
Which paper should we used
@claudionorpereiradefarias73439 жыл бұрын
como faço pra adiquiri o material pra produção
@Logo3Doming9 жыл бұрын
Claudionor Pereira de Farias Please email us for any products that you are interested in. Thank you. Logo3Doming LLC
@Logo3Doming Жыл бұрын
www.logo3doming.com/
@Singlepassprinter Жыл бұрын
How can I contact you Sir ?
@Logo3Doming Жыл бұрын
www.logo3doming.com/
@PrakashsVideo5 жыл бұрын
which plotter is that?
@rudykoszkul23745 жыл бұрын
Silhouette SD
@clicktostudy5 жыл бұрын
What is cost of setup
@rudykoszkul23745 жыл бұрын
www.logo3doming.com/doming-systems
@rudykoszkul23745 жыл бұрын
www.logo3doming.com/doming-systems
@Logo3Doming Жыл бұрын
www.logo3doming.com/
@jawedavediaavedia7724 Жыл бұрын
Doming as per order
@Logo3Doming Жыл бұрын
www.logo3doming.com/
@Logo3Doming9 жыл бұрын
Please visit us on our website: www.logo3doming.com/