If you're cutting panels at repeated widths you might want to get the 1200mm (1160mm on the scale) rail extension set that screws in with the included rail joiners at the back end of the unit. As well as providing a longer edge to square the panels off against, there is an adjustable end stop for the material so you can do repeat cuts. Cheers
@no-page2 жыл бұрын
This was more of an unboxing than a review. I would like to know how accurate the scale and detents are.
@chweatherl2 жыл бұрын
Thank you! I definitely feel like Festool "finally" got one right... By that I mean manufacturing something great (like always) that is competitively priced.
@ligngood37877 ай бұрын
Very helpful, thank you!! The price has gone up but so has the Woodpeckers so I think I will pick up the Festool. Can't believe a Festool ANYTHING is cheaper than another brand, lol.
@donavanshomes5 ай бұрын
Glad to help!
@christinakindler91122 жыл бұрын
I like your reviews on stuff. I agree that spending the extra $25.00 is the way to go. Definitely more for your dollars. Can't wait for the portable CNC router video!
@tobynskinner30987 ай бұрын
That little tightening nut for the angle should be able to unscrew off and be replaced with a big handle for holding it as you cut?
@Woodementary2 жыл бұрын
Demonstration video would be much appreciated. Thanks for your review.
@donavanshomes2 жыл бұрын
I will try and do one sometime
@workinhard239 ай бұрын
Definitely helpful. Appreciate you!
@donavanshomes9 ай бұрын
Glad it was helpful!
@steenfraosterbro32682 жыл бұрын
I looked at the Yeti a while back. It's $ 10.000 in my country (Denmark). Looking forward to your video.
@michael.schuler2 жыл бұрын
Thanks for this post. This Festool angle tool looks like a good value for general work. But as you say, it depends on what you're doing. For truly reliable (and therefore repeatable) 90 degree cuts, you can't beat the precision of a TSO dedicated guide rail square. TSO could justifiably cop the Stabila motto: "Trust. Never adjust." Comparing the differences in accuracy and potential applications of these two styles of guide rail squares is the same as comparing a bevel square to a try square. Both have their place.
@donavanshomes2 жыл бұрын
True I have fixed also
@michael.schuler2 жыл бұрын
@@donavanshomes It's all about matching weapons to most commonly encountered targets. I rarely rely on my track saw for protractor-measured angles for the type of finish work I do. My jobsite sawing arsenal relies on: 1) non-sliding 12" compound miter saw (I feel that its lack of sliding function minimizes lateral play, a common source of annoying inaccuracies; 2) compact 10" table saw with rack-and-pinion fence (I accept limited 24" max rip capacity as fair trade-off for light weight and compact size - Dewalt DW745); and 3) Festool track saw TS55 REQ with multiple tracks under 55" long, TSO auto-aligning rail connectors, TSO GRS-16PE guide rail square, and TSO 30" parallel guides. If I did more closed stringer stair work, I'd opt for a 12" slider; if I cut larger panels regularly, I'd bring longer guide rails to omit need and uncertainty of end-joining my 55" rails; if I worked heavier timbers much, I'd go with TS75 for power and depth of cut; etc. etc. A guy needs to sit down and have a talk with himself sometimes, to distinguish what you need to handle the work in front of you, rather than to do the type of work you wish you had. (Don't ask how I know...:-)
@loumonte6582 жыл бұрын
175.00 is not bad at all. Looking forward to the portable CNC. Great video brother.
@MAGAMAN2 жыл бұрын
But you have to have the festool track saw to use it, so it really costs like $1000.
@tcbridges Жыл бұрын
My question is it worth the money to have this one extra compared to the comes with the Festool MFT /3 table that included one not quit as nice as this model ?
@donavanshomes Жыл бұрын
I don’t this the one on my MFT I will recently took it off and put it in a drawer. I use this one on the job mainly and have the MFT in the shop so not sure if I can answer that for you.
@AlAmantea Жыл бұрын
Still waiting for mine to arrive! Like you, I ordered only the square, but now I wish I had ordered the kit along with the extension set for repeatable widths. I have the Insta-Square (same as yours) for doing 90's which works extremely well, but wanted to expand my capabilities for angled cuts. The WP version is quite expensive, quite heavy, and has too many moving small parts for use on a job site in my opinion.
@tcbridges Жыл бұрын
I ordered what you did and sent it back and bought the entire kit for $300 from Hartville Hardware through Amazon. Got it in 3 days
@AlAmantea Жыл бұрын
@@tcbridges I actually got lucky! The dealer mistakenly ordered me the full kit! While I still had to pay full price for it, I didn't mind.
@What_Other_Hobbies2 жыл бұрын
How well does the detent work? Is it repeatable and accurate? Thanks.
@donavanshomes2 жыл бұрын
I works fine for little I have used it so far
@peter_kelly2 жыл бұрын
Looking forward to the Smart Bench review!
@mauriceryton2 жыл бұрын
Good review, using logic.
@Psychlist19722 жыл бұрын
Looking forward to the portal CNC Router video.
@brendanconnelly18352 жыл бұрын
Keep up the great videos
@gayle48042 жыл бұрын
Very informative 👏
@johnmunoz8845 Жыл бұрын
Does anyone know what guid rails work with the Angle Stop? MY 1400 guide rail doesn't work with it. It doesn't clamp down.
@donavanshomes Жыл бұрын
I have used on 3 or 4 different rails and works fine not sure way it’s not working for you
@johnmunoz8845 Жыл бұрын
@@donavanshomes Thanks for the response. I figured it out. I was sliding the rib into the wrong slot. My first thought on the Angle Stop is that it takes too long to set up. I had to do a lot of measurements to get a straight cut. And it was still off after my first cut. I had to use a 26” Woodpecker Precision Square for accuracy.
@SteifWood2 жыл бұрын
Another world record for Festool: crappy finish but still the cheapest in a line up ... ((funny enough, Peter Millard uploaded a video yesterday where he found the same when comparing track hinges: the Festool hinge was cheaper and crappier than the Dashboard and Benchdog hinges)).
@Sk8ter4212 жыл бұрын
Thanks for the review I was heading out to buy it today and I’m glad I saw this.
@fleurdelune52402 жыл бұрын
❤
@Hko8 Жыл бұрын
You never get 90 degree with this tool)) you can try to adjust it for 90 degree, but as soon as you change the angle and put it again on 90 degree, its not gonna be 90.