Sawing Dimensional Lumber - Swingblade Sawmill BUILD Ep.12

[@DonnDIY]

The rest of this swingblade sawmill build series: kzbin.info/aero/PLkmF7FAZBzkWuunWOOh0zSzB1LllQdUKr My other videos: www.youtube.com/@DonnDIY/videos

[@vojtahrabanek4185]

1st de-construction video of Donn ever😂🎉

[@lean7775]

Шикарно! Автор поражает своим творчеством! Никогда не останавливайся!

[@09conrado]

That's really an accurate build Donn, I'm impressed. Just a solution to that annoying cable and an extra handle to push from the other side too and it's perfect. But do be careful pushing that spinning blade in the slippery snow conditions. I was glad the sawdust made it all a bit less slippery. But love the machine, nice lumber you made there.

[@romppaukko]

It turned out to be a very functional machine.🧐👍

[@nloggraficas]

Just need a flexible cable channel for the annoying cable in the middle of walking area and that’s it, another perfect machines built by DonnDIY👍🏼😎🇵🇷

[@valdis7663]

Донн ты просто молодец. Очень хорошая лесопилка у тебя получилась, бревно распустила как будто ножом по маслу водил. Доски все ровные, аккуратные получились. И всё что тебе нужно было, всё ты сделал своими руками. Прицеп с манипулятором, пилу, всё сам сделал. Молодец, моё тебе уважение. Благодарю за хорошее, доброе видео.

[@KevCampbell]

It’s like a kid getting a bike for Christmas: “I don’t care if it’s snowing, I wanna ride my new bike” 😊

[@DonnDIY]

Absolutely!😀

[@aaronozjaszowiczszechter9665]

Or the climate has not understood the present wisdom of the stage.

[@mikelskelley]

I love the adage it’s my train set so I’ll play any time I want, it’s working perfectly, just a bit mor tinkering, see if u can make a gantry for the electric cable to keep it out of your way, take care

[@MadeinPolandChannel]

Great job man!

[@DonnDIY]

Thanks a bunch!🙏🙏

[@valdis7663]

Donn, you're just great. You got a very good sawmill, she let the log go as if she was driving with a knife. The boards are all flat, neat. And everything you needed, you did everything with your own hands. A trailer with a manipulator, a saw, I did everything myself. Well done, my respect to you. Thank you for the good, kind video.

[@ДидарТлеужанов-в8х]

Супер 👍. Идеальные бруски получился. Брусы гораздо ровные чем на ленточном пилораме.

[@DonnDIY]

🙏🙏

[@george8873]

Best thing about a swing blade sawmill is you get the sized lumber you want right away without having to resaw it like with other sawmills. And as you stated in other comments, minimal handling of the log. A job well done Donn. Very impressed with your build skills.

[@DonnDIY]

Thanks. That's right, handling the log and material only one time is a time saver.

[@arsadorap3619]

​​@@DonnDIY the shovel under the front of the log could serve as a sky/sledge and ease the hauling uphill 3:10

[@markjames8664]

The lumber looks very good, probably better than the output of most sawmills.

[@RCake]

Well I guess the next project is an overhead cable guide 😂 Excellent sawmill, @Donn! You have all the right to be proud of having built all of this yourself, incredible! ❤❤❤

[@DonnDIY]

Yup, cable has to be installed somehow.👍

[@opendstudio7141]

@@DonnDIYspiral bungee power cord. I’m sure you have seen them somewhere.

[@ІгорМитохір]

Чудова пилорама, тільки для кабелю ще треба придумати якийсь підвіс щоб він не був під ногами.

[@deckname5794]

@@DonnDIY Maybe a drag chain

[@smaggies]

Build a base to hold wood, please cover the motor shaft to prevent something from getting pulled in add an additional push bar and maybe a laser to view the next cut. :)

[@Rubbernecker]

Outstanding!! The fact that the tip of the blade is in the same location whether its horizontal or vertical is amazing. Well done sir!!

[@DonnDIY]

It's just math and geometry.👍😛

[@tedbastwock3810]

@@DonnDIY yes, but not only did you figure it out but you also actually built it to the correct specs with fantastic precision

[@jamesa7506]

A fine job my friend, your whole operation is fantastic! An ATV with a power train driven trailer that has a claw crane to perfectly set up the logs you've just cut down in an awesome sawmill you've just made, all designed, built, and assembled by you!! I don't think it can get anymore super badass than that. You're the man! 👍💪

[@olddawgdreaming5715]

Now That's A Saw Mill !!! You built a fantastic Mill Donn and it does a great job right from the start. Congratulations. Thanks for sharing this build with us it was a great trip and fun to see it materialize. Stay safe and keep up the good work and videos. Fred.

[@DonnDIY]

Thank you Fred for sticking around for all that time.🙏🙏🙏

[@olddawgdreaming5715]

It's a pleasure watching you and how you have improved through the years and watching your family grow. Fred.@@DonnDIY

[@ripn929707]

Great adaptation of the Lucas mill. Ive run these many times. Great way to pump out dimensional lumber and heart wood beams.

[@TopCat2021]

There are few things in life as rewarding as seeing something in your head, building it and then using what you have created. A very good job well done Sir! Many thanks for bringing us along for the journey.

[@DonnDIY]

Many thanks for sticking around for that long. Cheers!🙏

[@TwoGaRinZmey99]

Отличный результат. Я рад за тебя. Эти материалы в хозяйстве пригодится. 😊

[@xksander]

Amazing job, Donn. It's nice to see how your inventions work. You have a brilliant mind!

[@18287470]

If I say so myself.

[@DonnDIY]

🙏🙏🙏

[@Rubbernecker]

I agree!!

[@paul4124]

Truly impressive Donn. The ease from going between horizontal and vertical, and getting the blade to meet smack in the corner is pretty to watch. Another great build.

[@DonnDIY]

Cheers! The ease getting dimrnsional lumber with this mill is sensational (for me). Real time saver.👍

[@kenwood9401]

wow great job and looks like a keeper nice rough lumber

[@Andre-tt4cw]

Très belle réalisation! vous avez baucoup de connaissances technique. Félicitation!

[@elevator9592]

It’s a beast. Two people could make short work of a log with that thing. Great job

[@DonnDIY]

Thanks!🙏

[@horatiohornblower868]

As you always say so eloquently: it works like a glove! Beautiful machine, Donn! As long as you grow your own trees, you can earn a lot of money with this sawmill.

[@BlacklistedBible]

Very cool Sawmill...!👍‍🥳👍‍

[@DonnDIY]

Thanks!

[@edwinri]

Thank you Doon for making us part of your work. I congratulate you from Puerto Rico.

[@gusbrameloah4719]

Man, donny is anything you can not do! Awesome brother!! My hat is off to you sir!

[@Grumpytoolguy1959]

Once again Donn you have created purpose built tools that not only work as intended but, from what I can see, wildly exceed expectations! Thank you for another enjoyable build series! Well done!

[@DonnDIY]

Thanks for following along.🙏 I finally managed to finish it. Next I have to take on a project that is smaller in size maybe and takes less time to build.😀

[@savaii4menow]

Love this build. Thank You for sharing. God Bless

[@DonnDIY]

Thank you for watching!

[@peterwiley4383]

Bloody awesome, the entire process.

[@dozer1642]

I love my bandsaw mill but these saws are so cool for pumping out dimensional lumber in a hurry. Great build my friend. 🤘🇺🇸👍

[@DonnDIY]

I loved my bandsaw as well but I was/am cutting mainly dimensional lumber. This swingblade suits my needs better.

[@purplebooger6410]

Now you should build a barn around it and the path up to it!? I’m picturing a barn big enough to stack logs on one side of the trailer and the new sawmill on the other side of the trailer with a path through the middle to pull the trailer in and out!? So much potential and opportunity for years to come!! Great video, builds up my own wish’s for the future!

[@DonnDIY]

Yes, absolutely.👍

[@aserta]

Something you could add on the claw is two lasers. The dots would give you an idea where the center of the log is regardless of where it is. Kinda like how ROVs have that 10 cm laser sight to tell the explorers what size the things they're pointing at are. One other thing, you could add a pole nearby with a loose spring and attach the feed wire to that, that way, it's not in your way when you're moving the carriage. As you're sitting when you're cutting, probably on the other side of the saw with an extension to bring the wire to the center of the mill.

[@arsadorap3619]

Or you can have the cable hanging on a cable between the pillars, like it's managed on gantry or jib cranes.

[@memyselfandeye1234]

ooow lets get a mac out and turn it into a CNC

[@julienrichard-1076]

I was going to suggest a simple jig to hang on the beam that lines up with the tip of the blade so it's easy to know where the first cut will be, but lasers would be good too!

[@daniellyon7904]

One thing ya might consider is a green lazer line for both planes that way you don't have to keep eyeballing it on new set. Set up a second rack on top with a plastic drag chain for your power supply. Love seeing it work tho. Great job building it.

[@DonnDIY]

Yup, all these updates are coming.👍

[@lesd40]

Lumber ready for immediate use...you can't beat that. Well done.

Awsome , very nice machine !!! congratulations

[@АлексейФидря-з3г]

Даже и не сомневался что всё получится 👌👏👏👏

[@DonnDIY]

🙏🙏🙏

[@isaacislaughter]

Whoa! Tool envy! Nice rigs man. Kiitos

[@DonnDIY]

Cheers!🙏

[@damiencranfield8658]

How efficient. Awesome job mate. Keep up the great engunity

[@DonnDIY]

Thanks! 🙏

[@suterfamily5578]

Donn, I can't possibly express how impressed I am at your accomplishments! The sawmill, the ATV, the trailer, the ARGO, the house, the shop remodel.... you've accomplished more in your life already than most people will in a lifetime. Was the log in this video an Ash tree? As a man in my '50's, who used an Alaskan chainsaw mill for many years, please let me caution you to be safe with that circular saw blade, when they bite, they bite HARD; kickback can occur very fast when hitting metal, or the blade becoming pinched for any reason. Awesome job!

[@chadcollier250]

Absolutely a great job!! Looks like it works great. Add a simple cable and pulley festoon for the power cord and it will be off the ground and away from your feet. Hope to see more of this sawmill. 😊

[@DonnDIY]

Yep.👍

[@Mikefestiva]

Nice work Donn! That looks like it’s working really well 👍 so awesome!

[@DonnDIY]

Cheers Mike! It works really well indeed.🤙I'm waiting for the two day blizzard to stop so I can maybe get some more logs for sawing.😀

[@dmitrykorolev240]

Отличная работа , я очень людлю смотреть ваши видео , всё очень очень здорово 👍👍👍

[@DonnDIY]

🙏🙏👍

[@donmoore502]

Nice Work!!! I really like this saw and has been added to extensive project list. Thinking I will go hydraulic on the drive rather than electric. Again, Nice work!!!

[@chrissmith7655]

Hi, awesome machine you have made, well done. Many thanks from UK.

[@DonnDIY]

👍👍

[@goldendredger]

Nothing beats the first board off a new mill one has built himself. Great job!

[@DonnDIY]

🙏🙏🙏

[@thunderstruck1078]

People like you built the civilization.

[@pravincial]

Очень, очень хорошо 👍, искренне рад за тебя. Ты крут

[@DonnDIY]

🙏🙏

[@ingener1707]

Теперь ставить надо два сервопривода для позиционирования каретки пиления и лазерные указатели 😊! А то так на глаз сложно определять какая толщина доски получается. Работа супер!!!

[@Lissopen]

там, где ручки регулировки, линейки имеются

[@ingener1707]

@@Lissopen линейки это хорошо, но автоматизация ещё лучше)))!

[@andrewshearstone1101]

That saw Mill is awesome Donn

[@toropov7950]

Отличная работа,молодец-руки из правильного места растут.Испытания прошли на ура,дело за доработками👍👍👍

[@DonnDIY]

🙏🙏

[@tedbastwock3810]

Absolutely amazing, love how this works, and your craftmanship is exceptional, very pro!

[@DonnDIY]

Thanks!

[@xcnpeanutx]

Absolut phantastisch! Respekt! Eine Überdachung fehlt da noch, aber mit den gesägten Brettern und Bohlen wird das ja wohl das nächste Projekt werden an dem du uns teilhaben läßt! Grüße aus good old germany;):D

[@walterruizdiaz874]

Congratulations from Argentina, excellent work. Here we are too poor to face a project like this

[@DonnDIY]

This project was cost friendly. If you can get your hands on an electric motor and a blade then most of the cost is already taken care of. I think I spent less than a 1000$ on this project in materials.

[@sueastside]

2 windshield wiper motors on the width/depth controls on the end wired to some simple controls on the carriage to save on walking and you'll have enough lumber for a giant workshop in no time!

[@DonnDIY]

I can also set the log closer to the operator end to avoid walking so much. At the moment I'm trying to keep the sawmill manual and simple to avoid higher maintenance costs. 👍

[@tobiasbostwick9002]

Well done Sir, very well done!

[@kestlovs]

Congrats on finishing a project, Donn. Those good results are very well deserved.

[@DonnDIY]

Thank you.🙏 I'm glad everything worked first try.👍

[@kestlovs]

Dude, you have half a thousand comments and still manage to answer lots of them :) no wonder you get stuff done, you just are able to. I had several my projects work first try. But they took very long to finish, because every step was thought over and every action was evaluated to match the plan, the idea. Many people dash head on, take the results, improve on something and voila, finish five times quicker. I don't know which way is better. If I try to do things quick, I make mistakes and sometimes this means no finish at all.

[@toxicboytoxic6882]

واقعا خسته نباشی و امیدوارم با موفقیت تست کردنه این اره الواربری خوب ،خستگی ساخت ان در رفته باشه! من ایران زندگی میکنم و خیلی خیلی لذت میبرم از تماشایه کارهایی که میکنی و امیدوارم بتونم در اینده یه کارگاه کوچک برای خودم درست کنم! امیدوارم که همیشه سلامت و پولدارباشی در کنار عزیزانت! Don't be really tired and I hope that after successfully testing this good saw, the fatigue of making it will be gone! I live in Iran and I really enjoy watching what you do and I hope to be able to create a small workshop for myself in the future! I hope you are always healthy and wealthy with your loved ones!

[@lovejcdc]

That sir is a very amazing machine. I have seen the videos of some other manufacturers versions of this saw. Your machine is definitely right up there. Great job

[@DonnDIY]

Cheers!

[@lumotroph]

Excellent work! Imagine having a little button you could press on a portable pendant that just advances the saw in Y (the short axis I guess) by a set amount! You could set it to 5cm with a stop and then just press a button to save half your trips! I didn’t realise how BIG it is! Walking around the machine actually takes some time haha

[@TheSuburbanGardener]

Ok. Now I get it. I wondered why you went to all the trouble, but that thing is awesome. It turns out lumber in a hurry.

[@DonnDIY]

Yup, the time invested in building this mill really pays off while using this mill.👍

[@firepinto]

This is so cool finally seeing it in action. I never realized that the shaft of the blade and the guard could slip past the log for unlimited cutting depth. Awesome !

[@DonnDIY]

Yup 👍

[@jeffselchow5719]

Another Job Well Done Donn.

[@krisley5178]

Wow! That thing works amazing! Just how you planned it. Well done Sir! 👍👍

[@Stakman1]

Very cool to see three of your projects all working together.

[@DonnDIY]

Cheers!

[@PorkBarrel.]

More than glad to have watched from the beginning! Excellent creation Donn. This should push you over a million!

[@DonnDIY]

Why not... Any million sounds great!😛😀

[@Einherjar_17]

It's wonderful how you work perfectly, congratulations and thank you very much for your videos!

[@DonnDIY]

Thanks fro watching!

[@bwillan]

That was a great test run of the swing blade sawmill. The boards look quite uniform. The electric motor didn't even break a sweat cutting this log into lumber. Time to start your logging operation, so that you can build the lumber shed and the solar kiln. 😁

[@DonnDIY]

First thing would be a sawmill shed though 😀

[@bwillan]

@@DonnDIY Good point, considering the amount of snow in your area already. LOL

[@baziliojr8696]

Congratulations. It turned out really good.

[@DonnDIY]

Thank you very much!

[@rjung_ch]

Hey Donn, that is cutting through that log like butter and it all lines up perfectly. Super tool, just great! 👍💪✌

[@vinceianni4026]

Good job Donn beautifully done

[@DonnDIY]

Thank you!

[@metricstormtrooper]

Thats one hell of a mill you've built there Don.

[@DonnDIY]

Thank you!

[@robertmanley7556]

I love this !! Look at all that nice wood the grain is amazing !! It worked so well the fruits of your labor has paid off for sure !!👍👍👍

[@vittorinoventurato9878]

bravissimo un super progetto complimenti

[@dismayer666]

Nice work! It looks like all those cust are so clean and even, so I gues the machine is pretty precise.

[@artemiasalina1860]

Really nice looking lumber!

[@09FLTRMM77]

MM77 Approved 👍🏼👍🏼………………………………………………………………………………………….WOW, I knew it would be awesome! Looks like 2x4’s for a……………………….sawmill shed?!?!? You build it, I’ll watch.

[@jonpeterson9733]

I can already see your next project, an overhead cable trolly, and motorized cutter head/height/depth control by RC. 😜 thank you for posting, as always, looking forward to your next project whatever that might be. 👍

[@Trotils]

Great! but one recomendation. Make a brake that holds saw while it is spining, to protect yourself from it if it accedantly slides in to you while you take boards away.

[@DonnDIY]

👍

[@joseluisbarcelogaspar7135]

Una maravilla ver los cortes tan limpios , muy buen trabajo , solo le falta un puntero laser y los cables que no le molesten . Mis felicitaciones . 👋👋💪💪👍👍👍

[@DonnDIY]

Laser is a good idea.👍

[@bufordtjustice4362]

Outstanding job! I have been contemplating a band mill for a couple of years now you have me thinking about a swing blade mill... Congratulations on the first trial success!

[@DonnDIY]

I'm glad I'm able to show you the benefits of a swingblade sawmill as well. 👍 I've had a bandsaw as well and prefer the swingblade for sure.🙏

[@gafaff]

That's an impressive machine you've made, which looks to have great precision. Also impressed by the 3 phase outlet you've set up, and the star-delta switch.

[@BosenkoViktor]

Руки золотые. Молодец, давно слежу за твоим заналом. 👍

[@12jsteve]

What a fantastic beast of a machine Donn! Very satisfying to watch those boards coming off that log which had only just come out of the forest using all your other amazing machines! 😁👏

[@okiedokie1129]

That’s some awesome work you have done to get such beautiful wood it’s amazing!

[@tujuprojects]

1:21 put a chain at the end of it, it saves your steel line from shredding.

[@celestialbeas9214]

This is awesome! Some improvements, that you may have already thought of: A graduated dial for your z, and y and y axis a cable chain for that cord a way to adjust the z and y from your carriage, that way you dont have to keep walking back to it some sort of bed with hold downs so you can keep the log from shifting as the weight redistributes maybe an automatic x axis travel? so that you could stand in one spot, and it travels down, pivots, cuts the board out, and all you have to do is retrieve the piece it cut? lasers to see where the cut will be

[@DCJones06]

Poetry in motion, all the hard work has come to fruition. Well done. Now the next thing is when can you build mine 🤣

[@DonnDIY]

🤣

[@jeanlucrichard2702]

excellent travail je suit toute vos projets pas simple de réalisé ces travaux sous le froid et la neige bon courages

[@DougAskin]

Works great by the looks, nice looking grain on the timber. The bit left would make a nice countertop

[@carloskawasaki656]

Awesome, thank you for sharing, always a pleasure starting my sunday morning with your project 👍👍👍👍

[@OneManOperation]

It has been a greate build series and the end result speaks for itself. Nice job mate👌

[@DonnDIY]

Thanks man! Always enjoying your build series as well.🤙Mighty fine job you're doing there on the island.😀

[@pandasalvesen1977]

Swingblade is the way to go, I see

[@DonnDIY]

If you're anything like me then yes. 😀

[@brianbloom1799]

Donn You Did a Great Build Be Proud.

[@holgerhahn4869]

Very nice! Took me a long time into the build to understand where this would be going to. But I understand why you prefer it to the sawmill type. Will be interesting to see the final adjustments and modifications- looking forward to that video! Cheers!

[@DonnDIY]

Yup, I like the fast cuts and minimal log and material handling. Super efficient.👍

[@mmitron3196]

excellent job . the only thing i would add would be rollers over the rond rail to remove the electric wire in the way

[@hisab-n8c]

Time to make a log skidding nose cone now 🤔Congratulations on the first trial success! 👍

[@DonnDIY]

Yes, thanks!

[@iainhetherington4608]

Nice job Donn well done Cheers from Aus

[@DonnDIY]

Cheers!

[@opendstudio7141]

I can tell you were thinking.. more power. Needs more torque. 😉 The rip blade geometry works, but you can hear the drag and the kerf closes in. Of course that could because both the wood and air being so dry. Good results and a successful test run. 👍😁👍

[@DonnDIY]

I didn't push it to the limit due to the inefficient vertical sawblade guard that sprayed sawdust into my face. I'll make a better guard and maybe swap out the motor pulley to get the blade rpm down from 2800 to 2400 so the blade speed is optimal and then try again.🤙5.5kW motor is more than enough I'd say torque wise.👍

[@tonysargent1699]

Totally mesmerising and completely absorbing! I guess it passed the test! 😁

[@DonnDIY]

It passed the test with flying colours. I am exceptionally happy with the result. Definitely worth the hassle to build one. I hope it's a keeper.🤙

[@flatlinesup]

Pretty good! 😁 Congrats on another great build!

[@DonnDIY]

Thank you very much!

[@austinf159]

Adding the cord in a cable chain along the beam so it rolls with the saw might make it easier/less annoying to use! Great seeing this project come together.

[@DonnDIY]

Yup, cable management coming.🤙

[@evgeniivorobei3470]

очень крутая штука получилась) надо какой-то придумать только стопор или тормоз, чтоб когда доску достаешь каретка с пильным диском не вернулась сама обратно) ну и стол надо пильный)для такого изделия как то на кирпичи не солидно)

[@danielvelazquez4801]

Wow I just seen some of your other creations and seeing this in action with your 4x4 log trailer in action just puts everything together amazing craftsmanship. Your machining and fabrication are simplistic yet so functional they make total sense. I wish engineers would absorb some of your means & methods the world would be a much better place lol. Sir you have a Ph D in engineering in my opinion.