Phenomenal video! Probably one of the best explanations of tuning I have ever heard. There's so much made up jargon here on KZbin about tuning. You use simple and direct terms which is very much appreciated!👍👍👍
@donnywalker4691 Жыл бұрын
Thanks buddy keep er in the wood
@jad2484 Жыл бұрын
@@donnywalker4691 Hey Donny! Hope all is well. I ordered a Walkerized 461R from you guys on September 27th via email with John. Just wanted to say I'm pretty stoked to get it. Anyhow thanks for all the good content 👌
@shaner67 Жыл бұрын
Thanks for making it all seem simple to fix the new series of carburetors.. Good luck racing this weekend. Cheers
@230e4 Жыл бұрын
Thanks for making this video to illustrate how simple this procedure is. Definitely a plus for Stihl m-tronic saws being able to replace just the solenoid. I run a ms661 sometimes that is 8 years old now, kept the debris out of the tank, a new filter and good oil and gas mix, the saw has had zero issues. I don't remember doing a reset on it but maybe once years ago. Maybe it's an example of only one but proper maintenance really pays.
@dewarner12 Жыл бұрын
Is it your experience that new Stihl saws with the M-tronic carburetor still have a problem that requires periodic replacement of the fuel solenoid, or is this something Stihl has now fixed?
@Zach_R Жыл бұрын
Thanks for sharing that info on the tune up kit had no idea they existed super helpful information. You are the man Donny!!
@dewarner12 Жыл бұрын
This was a really helpful video, and was exactly what I needed to know about in dealing with my Stihl 261C. I definitely subscribed. Thanks -
@jasoo87 Жыл бұрын
Great video Donny, I understand Stihl tech documents specify the white solenoid can't be used in every model/carb? Can you confirm?
@donnywalker4691 Жыл бұрын
I believe you are right but the models I deal with will if your not sure consult me or a tech dude at a dealer 🪵👍
@wrstew1272 Жыл бұрын
Donny- can you explain why Canucks say “ SemE” while after 60+ years of being in the cab of one, I was told that the proper way to say it is “ Sem-eye”. I watch the tow truck shows that visually have stunning exploits of winter boo boos driving up North of the Border, and the commentators Always pronounce it your way. No offense ment to y’all but I am confused about lots of stuff, and I figger a respected member of the Canuckistan Saw Council could help me with pronunciation as well as fixin stubborn cutting tools. You do great informative videos bye the way! Greetings from your southern border.
@jimssawsnstuff8903 Жыл бұрын
Good job Donny 😎👍 That's the one thing about the mtronic vs the husky carb, Husky doesn't have the replacement solenoid, have to replace the carb.
@donnywalker4691 Жыл бұрын
Yes true enough Jim
@jimssawsnstuff8903 Жыл бұрын
@@donnywalker4691 not sure if you've run into it, but apparently with the 201TC, sometimes the replacement solenoid and the OEM coil won't communicate, so there still ends up being the same symptoms after doing the solenoid and apparently it may require a coil too...Richard Flagg has a bunch of info on it in one of his videos on KZbin
@johnm9005 Жыл бұрын
I replaced the black solenoid with a green one on my 201tc because the local Stihl tech said the white one was not back compatible with the older control module. Long story short, saw runs like a champ.
@jimssawsnstuff8903 Жыл бұрын
@@johnm9005 thanks John, I have a new green one here, maybe I'll try that. 😉👍
@johnm9005 Жыл бұрын
@@jimssawsnstuff8903 I replaced Black with green
@joutdoorsmen23 Жыл бұрын
Thanks for info Donny, and good luck racing!!!!
@johncrawford5871 Жыл бұрын
Excellent info.
@waynetharp Жыл бұрын
I see complaints of newer Stihl top handles not wanting to restart after first refueling. Most explain as like a vapor lock type situation. Does the bad solenoid list of symptoms include this issue? Thanks
@donnywalker4691 Жыл бұрын
I’ve had brand new ones that were no good yes
@elijahmcgregor9193 Жыл бұрын
Thank you sir. Great information. Can you post videos on husky 550xp and stihl 500i maintenance please?
@oldcodger1929 Жыл бұрын
Thanks for the info. If I was even remotely interested in a electronic saw before I'm not now. I'll stay old school.
@justinweaver8787 Жыл бұрын
Thank u sir have a good weekend.
@jensenwilliam5434 Жыл бұрын
Thank you Donny! I think I will not buy anything any of these new saw! I will buy old saw from now on! The new saws has problem!! If you can’t adjust it I don’t want it. I will stay old school!! Agin thank you!!!