Tap to unmute

DORCH ENGINEERING HPFP STAGE 2 N55 INSTALL GUIDE | BMW 335i F30

  Рет қаралды 6,955

BOO5T

BOO5T

Күн бұрын

Пікірлер
@homanmaster
@homanmaster 4 жыл бұрын
Great install tutorial! Got this same pump on my 335i F30 and it’s a great fuel upgrade for more power on a upgraded turbo! Good job Chris!!!
@BOO5Tchannel
@BOO5Tchannel 4 жыл бұрын
Thanks, Jared and I installed yours too! 😁
@UnworthyMotors
@UnworthyMotors 4 жыл бұрын
Eric, the man, the legend
@BOO5Tchannel
@BOO5Tchannel 4 жыл бұрын
😂
@ewroldsen
@ewroldsen 4 жыл бұрын
Thanks Bud! you killed it on the install 👍
@BOO5Tchannel
@BOO5Tchannel 4 жыл бұрын
You killed it on the camera work!! 🤣
@WhatsyourForte
@WhatsyourForte 4 жыл бұрын
Great Install and Video. Very Detailed.
@BOO5Tchannel
@BOO5Tchannel 4 жыл бұрын
Thank you Sir!
@xcstormerlife
@xcstormerlife Жыл бұрын
Do you not need to rotate the engine to bottom dead center? BMW states that in it's documentation for replacing the HPFP.
@BOO5Tchannel
@BOO5Tchannel Жыл бұрын
Never heard or this but do what they say I don’t claim to be a mechanic
@jhill92
@jhill92 4 жыл бұрын
Great video! I'm thinking about doing this install, because I'm getting a turbo upgrade to the TTE550. Will run water methanol tho, so I'm not quite sure I need this.
@BOO5Tchannel
@BOO5Tchannel 4 жыл бұрын
Water meth is good but this is a must in my opinion to make sure your direct injection always has proper pressure, fuel pressure drop can burn up cylinders. Most tunes recommend HPFP
@jhill92
@jhill92 4 жыл бұрын
@@BOO5Tchannel damn I reckoned with this answer, but it's another 1.5k less in my bank account haha. Being a car guy sucks!
@jhill92
@jhill92 4 жыл бұрын
@@BOO5Tchannel but at least this install makes the decision to get port injection for the meth way easier. Once the intake manifold is off one might as well...
@BOO5Tchannel
@BOO5Tchannel 4 жыл бұрын
Joey Kennedy yes unfortunately I learned this the hard way. I made a video a few back that explains some parts needed for bigger turbos, fuel starvation is probably the main culprit in most issues with larger turbos
@jhill92
@jhill92 4 жыл бұрын
@@BOO5Tchannel well thanks for your advice. Recently blew my turbo, right before heading into deployment that was a bit unfortunate, but can't wait to get this thing to 500 horses once I'm back. I knew the hpfp is a weak link on the n55, but I was hoping meth injection would cover that. Guess it's saver to get that out of the way once and for all tho. After all I want the engine to be as reliable as possible. Did you switch to cooler spark plugs?
@leathermug1070
@leathermug1070 4 жыл бұрын
looks great dude
@BOO5Tchannel
@BOO5Tchannel 4 жыл бұрын
Thanks Seth!
@Amsfxyz
@Amsfxyz 3 жыл бұрын
Really helpful and great install as always! Sorry I skipped a few parts but at any point did you have to jack up the car on stands to get access to anything from below? Thinking of doing this one myself while following your video. If I end up going to a shop then how much time do you think it would take a BMW indy shop mechanic with all the tools and lift?
@BOO5Tchannel
@BOO5Tchannel 3 жыл бұрын
No lift needed for hpfp. Mechanics can take 1-2 hours if they are familiar with it I would say
@Amsfxyz
@Amsfxyz 3 жыл бұрын
​@@BOO5Tchannel My shop is quoting me 5 hrs :(
@BOO5Tchannel
@BOO5Tchannel 3 жыл бұрын
@@Amsfxyz not surprised it’s not an easy install so $500+ is worth it to make sure it’s done right. Just because it takes two hours doesn’t mean they will charge you two hours most shops do that
@Amsfxyz
@Amsfxyz 3 жыл бұрын
@@BOO5Tchannel got it! Thanks man. Yeah it comes to something around $500.
@kingkage7km
@kingkage7km 4 жыл бұрын
Does he have a video on the prometh install?
@BOO5Tchannel
@BOO5Tchannel 4 жыл бұрын
I have not made a video on meth kit yet, I am sure I will in the future. Grndtour does not make videos as of right now.
@kingkage7km
@kingkage7km 4 жыл бұрын
@@BOO5Tchannel ahh damn. Where I live there's no pump e85 so direct port meth is only option. And there's no video on that prometh setup so I'm hella interested on how he set it up
@kickedbacktatt
@kickedbacktatt 2 жыл бұрын
Do I need to upgrade my LPFP if I have stage 2 hpfp and pure turbo running e85 ?
@BOO5Tchannel
@BOO5Tchannel 2 жыл бұрын
Yes
@kickedbacktatt
@kickedbacktatt 2 жыл бұрын
Thanks bro 🐐
@kickedbacktatt
@kickedbacktatt 2 жыл бұрын
@@BOO5Tchannel I have a question bro I’m running stage 2 Bm3 with just stage 1 hpfp . Fbo and stock turbo right now and I’m Getting some stutters when I’m going about 60-70 mph and step on the peddle hard to get some boost it stutters bad any idea what it could be ?
@BOO5Tchannel
@BOO5Tchannel 2 жыл бұрын
@@kickedbacktatt are you trying to run ethanol mix? Is your lpfp upgraded? Custom tune would be ideal they can locate the problem with logs
@itsmrmoe9
@itsmrmoe9 4 жыл бұрын
What’re the tq limits on the zf8? You think the trans will be a weak link in your build?
@BOO5Tchannel
@BOO5Tchannel 4 жыл бұрын
Honestly I am not sure if limits but will find out soon lol. I don’t really think at 600-650 the trans will be too beat up and I drive it 1-2 times a week. With more and more launches when I do track it we will find out. I do have plans for a zip kit and clutches upgrade
@CM-FX
@CM-FX 3 жыл бұрын
Between spool and Dorch which do you recommend and why?
@BOO5Tchannel
@BOO5Tchannel 3 жыл бұрын
Dorch because it is a direct fit with a better fit. I’ve installed both and would go Dorch every time
@ronscott1290
@ronscott1290 4 жыл бұрын
Will this pump work with E-series N55?
@BOO5Tchannel
@BOO5Tchannel 4 жыл бұрын
I am pretty sure, contact Dorch they will tell you by vin!
@lawrencelitterini4973
@lawrencelitterini4973 3 жыл бұрын
Does the pump require a tune to properly funtion
@BOO5Tchannel
@BOO5Tchannel 3 жыл бұрын
Yes it does, it needs either a tune that can activate it off the shelf or a tuner to tune it in
@lawrencelitterini4973
@lawrencelitterini4973 3 жыл бұрын
@@BOO5Tchannel I'm currently running stage 3 turner Motorsports And doing both hpfp lpfp ... Confused if I would need to contact Turner because of there tunes being encripted ....
@BOO5Tchannel
@BOO5Tchannel 3 жыл бұрын
Yes because pump is a dud without it being coded in
@lawrencelitterini4973
@lawrencelitterini4973 3 жыл бұрын
@@BOO5Tchannel BMW AND THERE CODING😠... relatively new in BMW world.. Ran Audi for years.. Never had to code so many components. Thank you for your time
@BOO5Tchannel
@BOO5Tchannel 3 жыл бұрын
Absolutely bro! This is why I left this platform the N55 B58 and all of the above bmw products from the past 10 years is a tuning nightmare and sensor overload. I’m on a 2JZ now and should be much more later back of a tuner build
@carlosmontes384
@carlosmontes384 Жыл бұрын
what year is this car? I bought a DS2 HPFP last week (waiting to arrive) for my bow 640i 2013. I saw some guy in KZbin claiming that if your car has a horizontal stock HPFP, then the DS2 won't fit. Is this true?
@BOO5Tchannel
@BOO5Tchannel Жыл бұрын
No clue I’m not a bmw mechanic I just work on my own cars sorry
@f32_boost52
@f32_boost52 4 жыл бұрын
Better than having to crimp wires like the XDI has.
@BOO5Tchannel
@BOO5Tchannel 4 жыл бұрын
Yea Dorch is top notch!
@f32_boost52
@f32_boost52 4 жыл бұрын
@@BOO5Tchannel was gonna do XDI but I'm sold on this pump.
@mariomunoz7167
@mariomunoz7167 2 жыл бұрын
Why take off the cold air intake? No need
@BOO5Tchannel
@BOO5Tchannel 2 жыл бұрын
Do it how you want, it comes off and out of my way in seconds
@obihornchen6508
@obihornchen6508 3 жыл бұрын
Dude, you should really cover up the intake channels of the engine before you start wrenching on it... if something falls in there, you and your buddy are going to have a really bad day ;)
@BOO5Tchannel
@BOO5Tchannel 3 жыл бұрын
Ehh stuff happens and it’s a risk to do anything on a motor but thanks
BMW High Pressure Fuel Pump Teardown n53 n54 and n55
14:47
M.Ovidiu
Рет қаралды 28 М.
99.9% IMPOSSIBLE
00:24
STORROR
Рет қаралды 27 МЛН
Lazy days…
00:24
Anwar Jibawi
Рет қаралды 9 МЛН
УДИВИЛ ВСЕХ СВОИМ УХОДОМ!😳 #shorts
00:49
BMW M2 N55 Dorch Stage 2 HPFP Install: Full E85
17:45
Zero To 60
Рет қаралды 15 М.
BMW M2 N55 Pure 500 Turbo Install! Faster Turbo Swap But Is It Any Good??
24:22
Dorch Engineering Stage 1 HPFP // BMW N55 Installation
22:15