#doscember

[@Macsneese2345]

I successfully installed the real ms dos 7.10, thank you very much for the software 😊 I combined the ms dos 7.10 install disk and the ultimate ms dos 7.10 together , i also have to change something like autoexec.bat and config.sys, and some setup questions and i just successfully installed ms dos 7.10 without the cd installer / boot 😊 Thank you very much i have searched everywhere too hard… 😊 Thank you 😊👍

[@Henk717]

Mine enables some things the original MS-Dos 7.1 can't do but its still the real one under the hood. So if you end up liking mine in the end know you are not sacrefising anything. Glad you got yours working!

[@Macsneese2345]

@@Henk717 yeah i really like the ultimate ms dos 7.10 but it enables something the real ms dos cant do… I tried to install windows 3.1 on freedos and ended up “error: incompatible ms dos version” and found out this ultimate ms dos 7.10, it worked really well, and windows 3.1 successfully booted up and just missing group files, i liked it, it also could help people to install ms dos 7.10 on a old pc without a cd drive 😊

[@Macsneese2345]

Also I subscribed you channel (358th subscriber) 😊

[@LeftyPem]

This is the first documentation online I’ve found discussing partition management on an HP thin client when your hard drive is drive 2. Thank you so much for walking through that step!

[@RetroTechChris]

Excellent!

[@Henk717]

For the first time you get to see the way I install these thinclients, what do you think of it compared to the method you used for yours?

[@fra4455]

Great✌✌✌

[@Krazy_Kate]

Hi I would really love to follow this tutorial but I keep getting an error non-system disk or drive error when trying to boot from the usb in any slot. Ive had this thin client for years and I used to use easy2boot but I think my flash card was corrupted at some point when I had win9x on it. anyway cant boot to the internal storage because it needs reformated and I would love to use your new tool instead of going down the easy2boot rabbit hole again. Do you have any ideas on what I could do?

[@Henk717]

I have never been able to reproduce the issue, mine has always worked as simple as you see in the video. What kind of USB stick are you using? If you format it to freedos using Rufus does that boot?

[@Krazy_Kate]

@@Henk717 Ive tried 17 different kinds of usb sticks and could never get it to work. I ended up having to install windows 98 from cd rom then when I tried to run it after having windows 98 installed so I could mount your image in dos It would error out and say command not recognized. Unfortunate because I would really like to try your dos 7.1 stick but I am stuck with windows 98 and some drivers I experimented with to get things close to stable. Maybe its an issue with windows 11 and running the program you have for formating the usb or maybe it could be a specific quirk with my unit, but every other dos thing works fine but when I try to run your batch files they refuse to work.

[@Henk717]

@@Krazy_Kate What Unit do you have? For reference my own T5710 that you saw in the video runs on its latest bios. You can also try the stick on another computer so we know if the stick creation goes wrong or the thin client struggles with it.

[@Krazy_Kate]

@@Henk717 Freedos from rufus does work just fine but trying to boot the usb stuck using the porgram from archiveorg just gives me the no operating system insert disk message

[@Seathasky]

Tried 8 different USB sticks with your method and none worked. Always get "Invalid System disk" at bootup.

[@Henk717]

On this specific thin client? Because that would be odd, I don't know why it works out of the box on mine so well and not at all for others. So perhaps we can figure out together what the difference is. So full details, I have a T5710 thin client. The USB stick has been used in the past as a formatting stick for the factory image, but was recently formatted with Rufus. Post rufus I run my UDBS.exe as admin and then write on the whole device. And then it just boots. My T5710 is on the latest bios revision in case its a bios thing and of course make sure in the bios settings the USB is the primary boot device.

[@fluxrez]

I had the same issue. But I finally found one that just worked. Its an older USB stick. Was only 1 GB. FAT32

[@SchkuenteQoostewin]

I would like to see a Win 95/98 with this repacked of DOS

[@Henk717]

A windows installation video? Would you want it specifically for the T5710 or can it also be my retro gaming PC where the install is much faster because that would be easier for me to do. If you want to see how the MS-Dos is installed inside Windows 98 check my other video about it for that, since I did already show that part off.

[@SchkuenteQoostewin]

​@@Henk717 general retro gaming works. By the way love the repack, it runs everything. Oh so you did a vod on setting up UDOS7.1 along side Win98, nevermind.

[@XentecOg]

@@Henk717 can you tell me best NSFW model of kobold AI?

[@Henk717]

@@XentecOg My DOS video isn't really the place for that, come hang out with us on the KoboldAI discord and you can get good model reconnendations.

[@NatetheNintendofan]

Druaga 1 anyone that's why KZbin probably recommended me this

[@Henk717]

Its tagged doscember, so perhaps you watched other doscember videos in the past?

[@cosminbanu9035]

What monitor are you using?

[@Henk717]

Samsung Syncmaster 215TW, it was my dads seconds LCD monitor and his first IPS panel. After he bought a more color accurate monitor for photo editing he gave this one to me and I have been holding on to it since, the fantastic part about the monitor is that it also has Composite input for old consoles. It doesn't have HDMI since its to old, but both VGA and DVI are present. The computer it sits on top off is a 2005 era build, so this 2006 era monitor fits perfectly :D

[@Cartomancy]

It's a pity I don't have my 4 stiffy disk set for MS Dos anymore for your stiffy drive. Dir /p

[@R1BLACKRAVEN]

YOUR 7.1 DOS DOES NOT HAVE A WORKING FDISK ON IT.

[@Henk717]

It was working on my systems