woooooow, the video quality has really increased! Well done, TG! :)
@demoman0 Жыл бұрын
how do you factory reset ]
@XATAGE07794 жыл бұрын
I want it so bad. I hope you'll have them soon.
@KrakmanTaiwanGun4 жыл бұрын
Are available: bit.ly/348Ya8O
@XATAGE07794 жыл бұрын
@@KrakmanTaiwanGun they are cool too, but I would like to have this little badass 🥺
@petrpavlosek41324 жыл бұрын
Future coming 🤘
@CBlitz4 жыл бұрын
Does the mosfet have active breaking? This gun with 13:1 and high-speed motor would be the ultimate budget cqb gun
@mg1342mg2 жыл бұрын
Braking.
@karlfritz472 жыл бұрын
Ya.. breaking... meaning gearbox won't over spool when stop after auto firing
@hedaq81522 жыл бұрын
bought it, using it
@KrakmanTaiwanGun2 жыл бұрын
And you are liking it? :)
@shady_spider3 жыл бұрын
with the stock gearbox, can you use an 11.1v lipo batterey without damaging it? Im asking this because the ROF seems quite slow with a 7.4
@KrakmanTaiwanGun3 жыл бұрын
Yeah, you can put 11.1v inside, it should increase the ROF dramatically :)
@karlfritz472 жыл бұрын
The ROF is a little lower with 7.4. until your spring wears in a little...at least that's what I noticed .after about 2000 shots 7.4 is slower but you can get a higher mih with 7 4. Like 3000 mah
@BorelessAirsoft3 жыл бұрын
Love it!
@potatus6542 Жыл бұрын
Is it possible to have burst fire with the semi position instead of the auto position?
@ReaperSlender Жыл бұрын
I have the replica, unfortunately not. But you can use the press-release shoot mode to basically have full auto in the semi setting by just tapping the trigger, I love doing this during games, gives me really great control over my bursts.
@TheKingCraftPTАй бұрын
@@ReaperSlender im sorry but thats not true... sense my mostfet started to shit himself i now only have burst mode on semi and full auto, and there is nothing i can do to change that...i cant program it and cant reset it... well i can but it just doenst work...
@silver56643 жыл бұрын
all these abilities, yet not even a bolt stop/mag cut off feature? I know it would require proprietary magazines, but with how other companies are making standard magazines with an extended follower nowadays, you'd wonder if there would be a system that could detect an empty mag and cut off.
@KrakmanTaiwanGun3 жыл бұрын
You know, that those Double Eagle replicas are really reasonably priced, yes? And the feature you are writing about is possible only with the more expensive MOSFETs. Then it will easily make the next Double Eagle the Double Price.
@silver56643 жыл бұрын
@@KrakmanTaiwanGun I just checked. ~$150 pricetag while maintaining all these features is pretty good. I was under the assumption that these were ~$250-300 guns and that double eagle was entering the more premium market. That said, a cut-off feature is a mechanical addition. MOSFET usually doesn't have the capability, and if they did, it's a barebones cut-off that only simulates after a certain amount of shots instead of actually telling if the magazine is out from what I've seen. If Double Eagle were to create either a similar function like the TMs or KWAs for half the price would be a large milestone. Or even better, if they were able to find a way to replicate a cut-off with bolt stop feature in a manner that could be implemented into any other gun; I'd be willing to dish out double the price for the ability to keep a realistic feature.
@silver56643 жыл бұрын
@@KrakmanTaiwanGun that's fair enough. Like I said, I was under the assumption that this was a lineup that was going to be more premium oriented and was already in the $250-300 price range considering the amount of features being offered.
@peter112562 жыл бұрын
@@silver5664 A bit late here, but are there any $250-300 AEG with these features you said ? Genuinely asking.
@silver56642 жыл бұрын
@@peter11256 About the only series/brand I can think of that's just slightly over that range at around $350 would be the KWA AEG V2.5/3 series. I've got the Ronin 6 generation 1 that I run that has last round cut off. But they have proprietary mags.
@loupwolf99752 жыл бұрын
I have this gun and I have a 11.1 battery in it , my battery died and I can't get it back to life (because lipo loves doing that ) do u have any advice on what I can do to get my battery back to life without spending even more money on an already expensive hobby ??
@KrakmanTaiwanGun2 жыл бұрын
LiPo when you are not treating them right has a tendency to die, unfortunately, and there is no chance to bring them back to life if they are dead.
@dominikxx2787 Жыл бұрын
when will they still be available?
@KrakmanTaiwanGun Жыл бұрын
Which ones? most of them are constantly available :)
@ryanwilkins32064 жыл бұрын
Who makes the double eagle guns? And I also cant find any information on the falcon mosfet...
@nolanberod63072 жыл бұрын
I have a battery 8.4v ni mh is compatible With this weapon
@KrakmanTaiwanGun2 жыл бұрын
This movie is about the Falcon Fire Control System, not one replica, please tell me the model of the replica, and I will try to answer your question :)
@derwahnsinnige48072 жыл бұрын
got me 2 of them :)
@mrx25862 жыл бұрын
Is it possible to switch back to full auto ( after setting a burst mode ) without a factory reset.
@KrakmanTaiwanGun2 жыл бұрын
Probably the easiest way is to factory reset.
@ravenorman3 жыл бұрын
Why are the guns are no longer in your onlineshops available?
@KrakmanTaiwanGun3 жыл бұрын
The replicas you write about are available again in our offer. :) bit.ly/31Fq4qI
@snowbind3 жыл бұрын
@@KrakmanTaiwanGun Mine arrived this morning. I am very excited :)
@KrakmanTaiwanGun3 жыл бұрын
@@snowbind We wish you a lot of fun! :)
@literallyjustcursedmemes87003 жыл бұрын
Is there a pure automatic mode instead of burst? If so how to a program it to automatic firing mode?
@KrakmanTaiwanGun3 жыл бұрын
Hi! There is such an option. The Falcon system is highly configurable.
@literallyjustcursedmemes87003 жыл бұрын
@@KrakmanTaiwanGun thank you, I was able to figure it out. I got mine the other day and I love it so far, it’s my little baby
@Flip1943 жыл бұрын
@@literallyjustcursedmemes8700 how are you liking it so far?
@literallyjustcursedmemes87003 жыл бұрын
@@Flip194 I haven’t been able to use it yet because of COVID and with Bill-C21, I may have to sell my gun...
@adamkiss68902 жыл бұрын
@@Flip194 I love mine, it's a great and cheap gun
@hannibalsmithairsoft59232 жыл бұрын
Can the m908a run m120 springs stock?
@MxK94202 ай бұрын
my m904 cant be reseted to factory settings, it always stays on 5 round burst on both firemodes and when i press the trigger in semi it emits 2 signals
@KrakmanTaiwanGun2 ай бұрын
have you contacted our customer service/techs about the issue?
@TheKingCraftPTАй бұрын
I just got that same issue, did you manage to fix it? I tried to reset and program it, but nothing works....
@MxK9420Ай бұрын
@@TheKingCraftPTnope send it back to them, through the phone they told me they need to have it with them to fix it
@BSPL-cx5rn21 күн бұрын
@@MxK9420I have simmilar problem did they fix it?
@MxK942021 күн бұрын
@@BSPL-cx5rn yeah upon sending it to them and getting it back the issue was resolved, they told me that the mosfet was faulty
@StuHub2 жыл бұрын
Need some help, my m906 doesn’t shoot anymore after a lipo fire, I’m not sure but will it have protected the internals from shorting out? And will I need to replace anything?
@KrakmanTaiwanGun2 жыл бұрын
Could you please contact our service at service [at} taiwangun. com They will help you better than I ever would.
@murzynator4 жыл бұрын
Kiedy będzie dostawa
@mirkocarena43942 жыл бұрын
What about compatibility with aftermarket parts (e.g. big dragon, shs)? Is it marui standard?
@KrakmanTaiwanGun2 жыл бұрын
As we don't have any of the mentioned in our service, we cannot test it and be sure.
@JosifKalin2 жыл бұрын
Can you set the double shot mode on auto as well?
@KrakmanTaiwanGun2 жыл бұрын
0:24 you can program auto burst mode on 1 to 5 shots
@arthurmackintosh61542 жыл бұрын
what battery does this use cause I have heard they use PEQ 7.4 and sticks 7.4 do they both fit
Mine only shoots in bursts. In both Single and full auto option please help
@KrakmanTaiwanGun9 ай бұрын
reset it to the factory settings :)
@johnwick56129 ай бұрын
Thank you but it doesnt work. Also after every time i press the trigger it beeps
@KrakmanTaiwanGun9 ай бұрын
@@johnwick5612 so please contact our techs at service [at] taiwangun .com - they will be happy to help you :)
@TheKingCraftPTАй бұрын
@@johnwick5612 I have this same problem did you manage to fix it?
@johnwick5612Ай бұрын
@@TheKingCraftPT sadly not:/
@evileye16104 ай бұрын
I don’t know if anyone will see this but I can’t get semi to go back to single shot I need help not even reset fixes it
@KrakmanTaiwanGun4 ай бұрын
you have tried the reset to the factory settings right? Could you please contact our techs at service [at] taiwangun .com - our techs will help you better than I ever would.
@ZimNanigans3 жыл бұрын
Is it possible to have more than 1 active mode. Or is it limited to 1 more at a time?
@KrakmanTaiwanGun3 жыл бұрын
You can program the sensitivity of the trigger, and both of the fire modes at the same time, single and auto.
@siorzen14732 жыл бұрын
Its not a dmr, right, cuz i think about purchasing one with 420-440 fps/1,7J
@KrakmanTaiwanGun2 жыл бұрын
You can find Falcon Fire Control System in various replicas, you have to check their technical data to be sure that it fits your demands :)
@fubene5495 Жыл бұрын
Can i calibrate the selector plate? Like with a gate titan, my UTR is not working properly with the new receiver, my original one broke and couldnt find a replacement anywhere, the new one is a standard M4 receiver but the original selector plate and selector ambi gears doesnt fit, so i went for a standard selector switch and selector plate but it seems it doesnt reach the full auto sensor at all... couldnt find a double eagle standard selector plate also.... i tried with the shs and the point one, it doesnt go full auto anyways.
@KrakmanTaiwanGun Жыл бұрын
please contact our techs at service [at] taiwangun .com maybe they could help you
@janmilota11058 ай бұрын
Can I use the mosfet in another gun? Like another brand?
@KrakmanTaiwanGun8 ай бұрын
if you will fit it, of course :)
@galeb53649 ай бұрын
Hey man When I changed shooting modes There, at the handle, only beep beep beep was heard, but it would not fire I would be grateful if you knew how to eliminate this problem
@KrakmanTaiwanGun9 ай бұрын
Have you tried to reset it to the factory settings? If that won't help please contact our techs, they will help you the best they can.
@lukster93023 ай бұрын
how to reset it?@@KrakmanTaiwanGun
@KrakmanTaiwanGun3 ай бұрын
@@lukster9302 kzbin.info/www/bejne/en7MfaWHm8mLaq8si=kRzMOFNlOeJWuKbF&t=152 the factory setting instruction starts at 2:32
@k250s37 ай бұрын
How can I switch on the full auto mode ? I’m locked on the 5 shoots mod. Please answer me 😄
@KrakmanTaiwanGun7 ай бұрын
the simplest way would be the reset to the factory settings :)
@k250s37 ай бұрын
thanks :)
@marekvole18952 жыл бұрын
Hello. I just want ti ask if i can put better motor in?
@KrakmanTaiwanGun2 жыл бұрын
Of course you can, but be aware that stronger motor can damage the gearbox.
@H2KBeezy232 жыл бұрын
How can I fix mine
@KrakmanTaiwanGun2 жыл бұрын
And what's wrong with it?
@H2KBeezy232 жыл бұрын
@@KrakmanTaiwanGun I had put it to a binary setting and now it just makes a clicking noise
@H2KBeezy232 жыл бұрын
@@KrakmanTaiwanGun I can still do the modes but that same clicking noise is still there and won’t shoot
@KrakmanTaiwanGun2 жыл бұрын
@@H2KBeezy23 The easiest way is to reset it to the factory settings and program it all over again.
@MrLi9562 жыл бұрын
does the mosfet in this have precock? i have a gun with it and the nozzle sits towards to cylinder like if its got precock
@error2622 жыл бұрын
It has no active brake and no precocking. You're experiencing overspin. It's a bad mosfet that looks like Gate Titan but has almost no functions except those few programmable fire modes.
@Dropsetpin2 жыл бұрын
Is the first one how to get i back to stock because I changed the it and I don’t know which one i should put so it’s just normal
@KrakmanTaiwanGun2 жыл бұрын
there is an answer in 2:22 :) you can reset it right away.
@ProA-kv2jv2 жыл бұрын
I cant believe this sis only $150 screw evike I'm gonna buy my next gun from you guys
@KrakmanTaiwanGun2 жыл бұрын
and those Double Eagles are really cool replicas, not only cheap, but also pretty durable :)
@ProA-kv2jv2 жыл бұрын
@@KrakmanTaiwanGun gonna try to pick up one of the cyma MP5s in the near future and hopefully one of these too
@APHILLWAROFRIGHTS Жыл бұрын
I kinda made my full auto super fast somehow
@bmn_4206 ай бұрын
How to turn of the burst mode?
@KrakmanTaiwanGun6 ай бұрын
the easiest way to do it would be resetting the whole thing to factory settings.
@daredevilairsoft1019 ай бұрын
How do I reset back to full auto from burst
@KrakmanTaiwanGun9 ай бұрын
you have to reset it to the factory settings and program it once again
@ZimNanigans3 жыл бұрын
Do you have AK version with this falcon fire control on it?
@KrakmanTaiwanGun3 жыл бұрын
For now, we don't have any information about AKs with the Falcon FCS. But for sure if something happens we will shout about it :)
@MultiGori1234 жыл бұрын
muuuuuuuuuu bien
@st4s7942 жыл бұрын
how to reset from 3 shot series to normal full auto?
@KrakmanTaiwanGun Жыл бұрын
You should reset it to the factory settings, that's the easiest way to do it :)
@xxalxer59942 жыл бұрын
wich FPS version would be around 0.5 joule?
@KrakmanTaiwanGun2 жыл бұрын
You should contact our techs at service [at] taiwangun .com with your query they assist you better than I ever would
@sd52413 жыл бұрын
What battery do you suggest if i order 420 fps version?
@Alcatraz-iz1be3 жыл бұрын
11.1
@seboo_19 Жыл бұрын
This gun have binary trigger?
@KrakmanTaiwanGun Жыл бұрын
no, unfortunately it doesn't have the binary trigger.
@wijry3000 Жыл бұрын
why is m904e not on the website anymore?
@KrakmanTaiwanGun Жыл бұрын
Because right now we don't when it will be back
@Mike-yb5is2 жыл бұрын
Can anyone help me, I have this particular model and I really want to change the stock on it. But I can't find any parts or info I need to do so
@KrakmanTaiwanGun2 жыл бұрын
Please contact our service via e-mail, they will for sure help you better than I would do - service[at]taiwangun.com
@Mike-yb5is2 жыл бұрын
@@KrakmanTaiwanGun it's ok after an hour of me commenting I actually found what I needed.
@mouad11gft993 жыл бұрын
After programming a burst mode how can we get it back to full auto
@KrakmanTaiwanGun3 жыл бұрын
The best way would be to reset everything and programming it again
@mouad11gft992 жыл бұрын
@@KrakmanTaiwanGun is there a certain way to reset it?
@KrakmanTaiwanGun2 жыл бұрын
@@mouad11gft99 From 2:22, you need to press and hold the trigger for some time until you will hear the long continuous signal, then you have to release the trigger, and save the setting by turning it to auto and back to the safe position.
@Hongey_Bongey2 жыл бұрын
If you change it how do you change it back to full auto
@KrakmanTaiwanGun2 жыл бұрын
The simplest way is to reset it to factory settings.
@Hongey_Bongey2 жыл бұрын
I figured it out a a while ago but thanks for helping😀
@KrakmanTaiwanGun2 жыл бұрын
@@Hongey_Bongey I am sorry it took so long to answer
@vojinhonza1506 Жыл бұрын
Which type of battery can i get here?
@KrakmanTaiwanGun Жыл бұрын
In which model? Falcon Fire Control appears in a lot of different replicas :)
@vojinhonza1506 Жыл бұрын
@@KrakmanTaiwanGun M90G4
@KrakmanTaiwanGun Жыл бұрын
@@vojinhonza1506 You have links to three different batteries at the bottom of the product description on the product site.
Basically any LiPo that fits the specific model, everything depends on the model you own :)
@kiko7162 жыл бұрын
Can i use 9.6v?
@KrakmanTaiwanGun2 жыл бұрын
NiMH? It's better to use LiPo :)
@kubxoonekk81783 жыл бұрын
a jak zresetować tryb strzelania burstem
@KrakmanTaiwanGun3 жыл бұрын
Zawsze można przywrócić całość do ustawień fabrycznych, tak będzie najprościej.
@kwooook2 жыл бұрын
soooo how do i put it back on full auto?
@KrakmanTaiwanGun2 жыл бұрын
You should reset it to the factory settings :)
@kwooook2 жыл бұрын
@@KrakmanTaiwanGun anddddd how do i do that? it wasnt shown
@kyawzarnioo5350 Жыл бұрын
Can i dsg it?
@KrakmanTaiwanGun Жыл бұрын
what do you mean? Do you want it only in the single fire?
@_d_r_55723 жыл бұрын
Does this have active breaking?
@KrakmanTaiwanGun3 жыл бұрын
Active Braking and lots of other safety systems to prevent inside from breaking :)
@_d_r_55723 жыл бұрын
@@KrakmanTaiwanGun how do you turn on active breaking
@KrakmanTaiwanGun3 жыл бұрын
@@_d_r_5572 it is activated on default
@_d_r_55723 жыл бұрын
@@KrakmanTaiwanGun oh because I was having problems with a 45k in my gun only shooting full.
@KrakmanTaiwanGun3 жыл бұрын
@@_d_r_5572 what kind of problems do you had?
@Mxman100 Жыл бұрын
Can you 0leade help me. I out my gun into the 5 round burst in full auto but now j don't know how to put my gun back into normal full auto. Someone please help me
@KrakmanTaiwanGun Жыл бұрын
you probably have to reset it to factory settings :)
@Mxman100 Жыл бұрын
@@KrakmanTaiwanGun how do I do that
@KrakmanTaiwanGun Жыл бұрын
@@Mxman100 kzbin.info/www/bejne/en7MfaWHm8mLaq8
@Mxman100 Жыл бұрын
@@KrakmanTaiwanGun thanks a lot
@KrakmanTaiwanGun Жыл бұрын
@@Mxman100 It helped to reset the unit to the factory settings?
@Kuro2642 жыл бұрын
How to reset full auto settings?
@KrakmanTaiwanGun2 жыл бұрын
You have to reset the whole thing to the factory settings
@Kuro2642 жыл бұрын
@@KrakmanTaiwanGun How to do that?
@janawalker87094 жыл бұрын
THERE ARE CUTE
@stojanceangelov8 ай бұрын
what is the ROF with the 11v battery?
@KrakmanTaiwanGun8 ай бұрын
which replica precisely you are thinking about?
@stojanceangelov8 ай бұрын
@@KrakmanTaiwanGun about the er47
@asacran3 жыл бұрын
suppressors for this replica?
@KrakmanTaiwanGun3 жыл бұрын
It has left-hand thread 14mm so every suppressor working with this thread will work :)
@rachelramos9844 жыл бұрын
💫✅🥰
@mrpugster4 жыл бұрын
It's a decent looking AEG but that "Falcon Firing Control System" writing on the upper is just awful.
@ryanmolyneaux76154 жыл бұрын
Just looks cheap
@adamkiss68902 жыл бұрын
In reality it's more grey it's blending in real good