Douk Audio VU1 PRO MIC/LINE VU Meter Display Analog RCA/XLR Switcher Audio Adapter Converter

More information please click: www.ebay.com/i...
VU1 PRO VU meter & audio converter box is originally designed by Douk Audio:
As a VU meter, with LINE and microphone inputs, can be matched well with most audio devices such as phone, computer, CD players, or speakers etc., very suitable for home/office/studio to dynamically decorate your auditory feast.
As an audio adapter, easily to convert XLR (RCA) input to RCA (XLR) output and with IN/OUT switch, no need to plug in and out cables repeatedly to avoid wearing the contact point of the sockets.
With Gain adjustment / Delay adjustment / Environment noise filtering / AGC and DB mode selection.

[@htmthegame1]

How do you adjust the backlight brightness? There's only two small holes in the back. Thanks.

[@adaboy4z]

If this had 2 XLR outputs it would sell more. I have 3 devices with XLR. I would need 2 XLR outputs for my main Amp and headphone amp.

[@guanhuan]

Thanks for your suggestions and we have VU4 which with 2 XLR outputs, www.ebay.com/itm/274922154767

[@victormedrano2316]

Hi there, do you think that if I connect an tube headphone amp / preamp (Xduuo TA 26) the RCA output through this device RCA input and then plug a balance XLS out to "feed" a pair of Yamaha HS7 active studio monitor speakers, can the flatter sound of the HS7s get that warm tube signature from the TA 26 without any distortion/noise? Cheers

[@guanhuan]

yeah, vu1 pro doesn‘t make any influence on the sound quality, also won't cause any distortion and noise. The vu meter only receive the signal and the pointer beating along with the signal amplitude.

[@willbrink]

Does it have a mic so it does not need RCA plugged in to use VU meters?

[@guanhuan]

Yes, it support wireless mic / wired RCA & XLR inputs.

[@tomcutrecords]

Ciao sto per comprarlo ma vorrei capire prima se la luce su i 2 vu meter è presente ?? Oppure non c’è luce ?? Grazie

[@guanhuan]

Ciao, c'è la retroilluminazione su due vu meter e la luminosità può essere regolata tramite due resistori sul pannello posteriore.

[@pi_husky4485]

Hi! Just bought it. Im going to use it in XLR but XLR already has Left and Right. So can i just use one cable and both meters will work?

[@guanhuan]

Hello, connecting one xlr cable means one channel not stereo, so only one vu meter will work, what device you connect, why only use one xlr cable?

[@pi_husky4485]

@@guanhuan Bc if i can it would be awesome to have both channels separate, One for my Line in on the mixer and one for my computer audio out

[@guanhuan]

@@pi_husky4485 Hello, maybe you can connect like this: computer---VU1 pro XLR L/R input---VU1 pro XLR L/R or VU1 pro RCA L/R output---the input of mixer, both vu meters wil work.

[@pi_husky4485]

@@guanhuan i was kinda thinking Since i have my pc audio coming through my interface i could do it like this Mixer out - xlr VU1 Interface out- xlr VU2

[@guanhuan]

@@pi_husky4485 Oh, you want to use XLR L/R input and output separetely, right? It's ok, XLR L output corresponds to XLR L input, and XLR R output corresponds to XLR R input, VU1 pro supports input two audio source at the same time, and the vu meter will also work separately.

[@WorldView22]

Does it have backlight on the the vu meter windows?

[@guanhuan]

Yes, more information please click: www.ebay.com/itm/265085501415