Drafting the Basic Bodice Back

In this tutorial, you'll learn how to draft the Basic Bodice Back, following the drafting guidelines from the textbook, Pattern Making for Fashion Design by Helen Joseph Armstrong.

[@nigelspandex2877]

Hi, this is very well done and helpful to see it done step by step. I do have a question, though. From L to O you said to measure up 7-3/8" (as directed in the book), but later you mention that you measured up 7-7/8" from L to O (which seems to show on the scaled pattern paper). Is there a reason for the two different measurements? Thanks!

[@deepthianand9783]

Hi, The book instructions are easy to follow now, please draft basic sleeves too! Thanks

[@ProfessorTJWilkins]

Noted!

[@bonginkosimnkandla4730]

Wow thank you so much this was so easy

[@ProfessorTJWilkins]

You’re welcome 😊

[@lollythebabyb6154]

Thank you so much mam it’s really helpful. Can you please make one more video about basic sleeve and please explain the arm hole measurement I don’t really get it.

[@ProfessorTJWilkins]

Will upload soon

[@romneywalker4530]

I have two editions to this book and I have been so confused with some of it. Thankyou so much for doing this. You make so much easier. I hope you you can also show patten grading as well

[@ProfessorTJWilkins]

Glad it was helpful!

[@phinabash9567]

Thanks a lot, but please how can one get measurements for a size 8

[@ProfessorTJWilkins]

You can get all measurements from the Textbook www.amazon.com/Patternmaking-Fashion-Design-Joseph-Armstrong/dp/9332518114/ref=sr_1_1?crid=19GQ8DXU9TJDC&keywords=pattern+making+for+fashion+design&qid=1678410547&sprefix=pattern+making+%2Caps%2C95&sr=8-1

[@hannahmustapha8666]

Please how to make the waist to hip line of this bodice ma. Thanks a lot ❤

[@ProfessorTJWilkins]

Greetings, are you asking for a tutorial on extending the bodice so it ends at the hipline?

[@level2456]

Hello. Thanks for the video. Why is M not on the BE line? Why should it be 3/16 down

[@ProfessorTJWilkins]

Thank you for pointing that out, make sure to add that component when drafting the pattern.

[@yasserghareb8488]

Good

[@ProfessorTJWilkins]

Thank You!

[@tanmaykakde_007]

Please upload sleeve draft

[@ProfessorTJWilkins]

Will do

[@lollythebabyb6154]

Thanks a lot it helped ❤️

[@ProfessorTJWilkins]

You're welcome!

[@naseebamir1997]

Sleeves pattern?

[@ProfessorTJWilkins]

That is on the way

[@soniyadav2642]

Good but speak to Hindi

[@soniyadav2642]

Plz

[@ProfessorTJWilkins]

Thank You for the suggestion. I will definitely figure out how to do that!