Finally! Quick Guide To Setting Up Crossfire Nano! How To Wire & Install & Program

In today's video we will quickly run through wiring, installation, and programming of your TBS Crossfire Nano RX. There are tons of videos that drag on and on about this receiver, but if you want to just learn how to put it in and fly your quad then you have found the right video!
How to set up RSSI / LQ for your crossfire:
kzbin.info/www/bejne/pl6XZpynmZmFZ9E
Where to get a TBS Crossfire Nano RX:
www.myfpvstore.com/shop/radios/tbs-crossfire-nano-rx/
Where to download TBS Agent:
www.team-blacksheep.com/shop/q:tbs%20agent
How to fix spinning out of control quad in betaflight:
kzbin.info/www/bejne/pqXIqn2Mob6VfJY
How to set up modes in betaflight:
kzbin.info/www/bejne/jXbKnJebj51lq6c
If you need new firmware on your flightcontroller:
kzbin.info/www/bejne/nZO0c55_gtN-faM
Where to get other TBS Crossfire Products:
www.myfpvstore.com/?s=crossfire&post_type=product&title=1&excerpt=1&content=1&categories=1&attributes=1&tags=1&sku=0&orderby=date-DESC&ixwps=1
===▶️www.patreon.com/drainmanfpv
▶️Crossfire Nano SE:
✔️www.myfpvstore.com/koh7
▶️Unify Pro 32 HV:
✔️www.myfpvstore.com/2h0e
▶️Caddx Air Unit for DJI
✔️www.myfpvstore.com/36cn
▶️Custom DrainMan Motors!
✔️www.myfpvstore.com/iydp
▶️Smoke Stoppers:
✔️amzn.to/3tsWhhq
✔️amzn.to/2YL7trB
✔️amzn.to/3tsMt77
✔️www.myfpvstore.com/8bf3
▶️All Drone Pilots Need A Power Supply! Build Your Own!
✔️kzbin.info/www/bejne/bmHRfqSFbrmEn5Y
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣
╠╗║╚╝║║╠╗║╚╣║║║║║═╣
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
kzbin.info
www.patreon.com/drainmanfpv
▶️If you want to learn about LED's:
✔️kzbin.info/www/bejne/h2HdmJ13mJ6Bp80
====▶️My Scope:
✔️amzn.to/2Y7NUtc
====▶️Cheap Version:
✔️amzn.to/2PC8Ogj
▶️DJI Air Unit: ($4 Cheaper Than Anywhere Else & 2 Day Shipping)
amzn.to/2PjqUDi
✔️or
✔️www.myfpvstore.com/7ts8
▶️How To Taranis:
✔️kzbin.info/aero/PLE-EjNqyKwcgHSszEqAgMqrZD1JuBOUez
▶️My Electronic Screwdriver:
✔️kzbin.info/www/bejne/fITcd62spLmVkLc
▶️My Soldering Iron:
✔️amzn.to/2Oj95XS
▶️My Soldering Iron Tips:
✔️amzn.to/39IT453
and
✔️amzn.to/2Oj7r8C
▶️1.5mm Driver:
✔️amzn.to/3txYarX
▶️Radio Receivers:
✔️www.myfpvstore.com/radios/radio-receivers/
▶️Hobbywing:
✔️www.myfpvstore.com/m7va
or
✔️amzn.to/31e6jFM
▶️Loctite:
✔️amzn.to/39QY5HE
▶️Screw Pack:
✔️amzn.to/2BPzBSq
====▶️How To Set Up A Throttle Cap: (Become A Better Pilot)
✔️kzbin.info/www/bejne/j5SVXoGah8d7nLM
====▶️My Go To Pack:
✔️4s : www.myfpvstore.com/t83u
✔️6s : www.myfpvstore.com/fyk0
====▶️Flight Controllers:
✔️www.myfpvstore.com/940s
====▶️ Quadcopter Frames:
✔️www.myfpvstore.com/quadcopter-frames/
====▶️ The Goggles I use:
✔️amzn.to/3sQ5ksu (Comes w/ 2 Modules)
✔️Analog - www.myfpvstore.com/5ff6
====▶️My Radio:
✔️amzn.to/3sU9Fem
✔️Non-DJI: amzn.to/39dqI3c
✔️HD - amzn.to/2AVAEQo
====▶️ Video Module That I use (When Using Analog):
✔️ www.myfpvstore.com/s1mh
====▶️Bench Power Supply:
✔️amzn.to/3cpIOhE
====▶️Field Bag:
✔️www.myfpvstore.com/l1z9
or
✔️amzn.to/2TleAns
or
Ethix:✔️www.myfpvstore.com/m3om
====▶️My 3D Printer:
✔️shop.prusa3d.com/en/3d-printers/180-original-prusa-i3-mk3-kit.html?gclid=Cj0KCQjwqs3rBRCdARIsADe1pfTfQC1uJs3mXhPKfoJIxOmfZgpRX9lPjZ2P25BSjEVf9uqq85LlxqAaAp9OEALw_wcB
====▶️My Camera Used:
✔️amzn.to/2wX0eCg
====▶️My Cam Mic:
✔️amzn.to/3b2ZoUZ
====▶️Contact Me: @DrainManFPV on FB or [e-mail]
====▶️I'Gizzle: drainmanfpv
====▶️www.patreon.com/drainmanfpv
#Crossfire #Nano #TBS

[@carlos0259774]

Man I wish you were my Physics teacher. No BS , no overly complicated crap... just straight to the point. Thanks a lot Buddy 👍🏻

[@sticks73]

am after 5 years of flying still a big fan of JB's explanation style,, but I must say, very clear the way you put it all , 💯% respect !!👌🔥

[@edclevel402]

Your training style is spot on. To the point, no BS, crystal clear. Incredibly helpful!

[@paulhope3401]

Yes, absolutely superb, the perfect balance of concise on point information for this audience without any unnecessary fluff. He would make a great course trainer. Sub'd..

[@liamcharlie3592]

instablaster...

[@beefybeef1326]

Totally agree!! No nonsense, clear and quick!. Thanks!

[@tango_sierra8608]

Glad I found this video. Something about how you explain stuff is so much better. No side information, just what you need. But yet still EVERYTHIng you need and straight to it. Good work!

[@2toeninja]

I can't tell you how many videos I've watched of tbs nano installation and this is the only one I understand. Thank you

[@Epillon]

Man, this is FINALLY the video I've been looking for to install my Nano. Well explained, excellent examples to show us not just tell us. Just the facts, I don't need to know the historic background and intricacies of a part like every other video seemed to do.

[@user-wz3fz5lq7n]

I’m watching these very helpful tutorial many times before i received my crossfire nano rx and tbs tango 2 and specially i never seen anything tutorials like these complete step and explain u every detail’s no fast forward like the other thinking newbie like me can get it right away ! Thanks man looking forward for more videos we do loved and appreciated this

[@MatthewTaylor3]

I love the detail used for this video. I anticipate getting my crossfire in hand tomorrow to try all this. My soldering iron is ready and waiting.

[@ataraxiafpv]

Ive been in this for a couple years now and I still learn new things everyday... Thank you, noticed that my issue was not having the Channel 1 set to CRSF TX. I was scratching my head for a couple hours.

[@nyclassic4ever130]

This dude is straight to the point 👍🏼 ...no filler.

[@FPV777]

Wow, excitement!!! All stuff in one video, even howto Bind, ... and setup TBS CROSSFIRE Nano in FrSKY X9D , inclusive beta flight setup. Just AMAZING 😍😍😍

[@lundstromtom]

Appreciate all your help. As you know this can be very frustrating at times. You walk me through it, thank you sir

[@TheWhatwasthat]

Your video was amazing , using different flight boards your explanations your wiring everything was awesome thank you so much you made my life so much easier tonight.

[@mickelson8332]

spot on DM, love your delivery, no messing, you just get on with it. cheers Mick UK

[@3eggerfpv397]

Absolutely great video on explaining this process!

[@epp1026del]

Nice work man. Short and to the point as always. Love your vids Keep up good work

[@UPmichiganfpv]

Can’t thankyou enough man. I just setup my crossfire v2 module for my taranis qx7, I flashed the latest version of open tx and copied the SD card contents then followed your tutorial all good to go! And side note, (for anyone who can’t find enough info on how to do it, yes the taranis qx7 access) can easily be setup with crossfire. It took me 5 minutes. And the access radios don’t need inverter mod. Thanks again!!

[@elis51501]

Great tutorial, I ordered (4) receivers and the Tbs Crossfire Micro V2. Switching (4) quads from the frsky R9 system over:) thanks for this info I’ll be making use of it shortly.

[@Eugz92]

Such a good video explained everything I needed to know. Solid work

[@WBBlocker]

Nicely done video. Cleared up my confusion with tx and rx. Thanks for the help!

[@RADERFPV]

I prefer the regular antenna too. Another great video man, keep up the great content👍

[@victoriabelucci6761]

💯 % best tutorial i have ever seen i just did it in first try as a begginer 👍🏻

[@mr.nobody_fpv9388]

Just subbed to your channel! Straight to the point... I really appreciated this video! Just cruised through the setup and all is good...you are tha man !or should I say DrainMan!

[@DrainManFPV]

haha thanks man!

[@michael3573]

Man, I had to agree in comment with the others, dig your to the point, no BS style. Get it done, make it work, simple steps, go fly. 🔥🤘

[@cheechfpv]

Thanks Drainman! Very helpful video for pilots new to CRSF.

[@michaelcallahan2149]

Clear, simple and to the point. Thanks much!

[@slackersfpv]

LUV YOU DRAINMAN!!!!! ALWAYS SAVES THE DAY WITH THESE YEAR OLD VIDEOS

[@dbcooperfpv9883]

short and sweet - love the quick reference. thanks!

[@cftito]

New subscriber here. Awesome! Straight to the point! Keep up the good work. I appreciate you!

[@enjoyyourlife2518]

Nice work mate . Im a total noob n dont know my ass from my rx . 1st video that made sense to me . I hope your doin well and your you tube channel goes right off . Looking forward to more . I like your style . Keep it simple and spot on facts thats educating people all over the world . Keeps ths hobby so much more accessible for people like me that have no idea and people looking to learn more , which eventually means getting out there and having fun sooner . Thanks Drainman . Im bloody glad I stumbled on to your channel 😁

[@haveboard]

Thanks for this and a ton of your other videos. You’ve taught me a lot!

[@SH-ry2xi]

I love your quick no bullshit style. I referenced this video a bunch of times while installing today

[@ZSilv3rFPV]

very well explained... just what i needed as a new CRSF user. thank you.!!

[@Mikechin517]

appreciate the video for new guys -TBS support =)

[@Hydra509]

Always find clear and right to the point videos on your channel. Appreciate your time brother!

[@Chio_OB]

This is exactly the video I needed!

[@sleepingbearffg5008]

Hey brother thanks.. your videos were a blessing. Most assume all computer guys. Your videos made it possible for me to enjoy hobby I love. Sincere thanks. God bless

[@grahammshotmailcom]

Exactly the 'how to' video I was looking for.

[@rogergravel6638]

great tutorial clear and straight

[@matteobridges6480]

I like your teaching style, u don't just blow past stuff, thanks bro

[@johnpavlic]

I concur.

[@KCQuadTronX]

thanks for such amazing and educational content!!!

[@Consti77]

Very good explanation! Thanks a lot!

[@joncoop2873]

another great one!!! keep em comin

[@Politicallyhomeless957]

Your video really helped me. Thank you!

[@cesarprieto652]

PERFECT explanation!

[@md95tsi]

Thank You this helped me alot im new to Crossfire

[@highbeing]

Step by step, thank you so much.

[@jlarson42]

Have a crossfire module and the nano on the way. Your vids are very helpful, thanks. Happy flying.

[@RADERFPV]

You're gonna love it👍

[@briankatz982]

100% excellent tutorial!

[@linoramirez4492]

Thanks for the video very helpful

[@goku445]

Very clear tutorial.

[@alien-oo-_-oo5732]

Only video that has made me understand all this

[@noceris9303]

Thanks mate you solved an issue I was having, cheers

[@graywoulf]

You just made my setting up my Crossfire a whole lot easier!! 😊 Thank you very, very much! Now, do I have to run the Crossfire Agent or is it optional? And what about setting up Smart Audio? Sorry to ask so much but you have a knack for explaining things that I can wrap my head around. 😉

[@julesindahouse]

Brilliant! So well explained even tripod could understand! 🙂 Get it?

[@BikinTV1]

you are the man. greetings from malaysia. u just got 1 sub from asia.

[@jamesreid3326]

Perfect info 👍🏻👍🏻

[@luckyfpv323]

Thanks for this!

[@chrisneff3489]

Great video. Thank you

[@CandyCane24]

Super, man.Thanks!

[@bamatube5318]

Every other source of information confuses me. Your videos usually have me unsolder, resolder, change betaflight/iNav settings, and BOOM! my stuff works

[@michael.mccauley]

Great detail thanks! OK I followed your instructions and all went well with everything working except smart audio. It's still on the same UART as before and the Nano receiver is on a different UART. When I enter the VTX settings in my goggles everything looks as it should but no changes are saved. What am I missing?

[@h2o-fpv623]

Great video thank u

[@doktordrone]

Thank you very much for this useful sharing. Would you like to help me: i use tango 2 and craf nano rx. yesterday my rx antenna was released when I flew it, after that my rx continued to blink and ask for bind. I already bind and after unplugging the battery, the RX continues to blink again. Is my RX broken? Thank you 🙏🙏🙏

[@xavier_arthur]

Awesome 😎 thanks 😊

[@serval_fpv]

No fckn about good info straight to the point... gets a sub from me..

[@AErefrigeration]

drain man you are the best

[@earlybirdflights9884]

Thanks alot👍

[@NicuIrimia]

Thank you for the good content! where can we get the pcb holder?

[@melvinstewart3718]

THANKS DRAINMAN

[@cheechfpv]

Thanks!

[@choppergirl]

I'd like to see a video on soldering up one direct connect servo to the nano extra pads.

[@DeNikow]

Nice soldering!

[@rueda82nd]

Thanks D Man

[@DucTaZenSurfer]

Drainman, what is the board you are using to clamp down your CRSF nano receiver? Did you print that yourself or did you buy that? Love the videos, will be installing my crsf nano for the first time after watching this video! Thank you for the amazing content!

[@egtreadway4232]

So I've upgraded my micro tx v2 and the wifi module and wired my nano receiver to f405-wing same as you it binds and all telemetry is coming back to radiomaster tx16s, the problem is I can't get it to connect to any android app like mission planner or Q ground control. My question is should nano channel out 3 and 4 be wired to separate uart on f405-wing? Thanks

[@96BBSJ]

Thank you for the video! I have a Goku GM415T FC and I can’t figure out where to solder the RX to. Any tips for cases where there are no descriptions on the FC itself? Thank you!

[@kudzy11]

How similar would this be using the nano diversity with the naza lite fc? First timer sat with a pile of parts and very little confidence! Please help 🙏

[@morhol33]

Hello great job, I came across your channel and I have a question... What if it's a TBS 6ch diversity rx how would you wire it for SBUS.

[@Sabritelol]

how can i know which color is which , can you share the manual of tbs nano to see which color of the wire is on the appropriate pad

[@JULIANysuHOHNER]

I have a taranis x lite 9 can i do this same installation?and if i buy a betafpv with crossfire controller can i just bind and fly?

[@aztecjoe29]

Ty

[@egtreadway4232]

Thanks for video, I'm new to crossfire but I have the micro tx v2 and nano receiver, I'm trying to get connected to mission planner, I'm using f405 wing flashed with inav 2.5.0 would I wire my receiver the same as you to make this happen? Thanks again

[@bugsysiegals]

I'm not getting RSSI on the next video ... are we supposed to connect more than the 4 wires?

[@kimdra9321]

Hi would the mine Eachine Wizard X220S ?? Function? and I have that qx7 with the Crossfire Micro..!

[@bikemancody2752]

Nice. What about OSD in BF. Do you need to select anything else in the ports tab to actuate OSD or will it just work now?

[@fpvnycdream_4197]

Having an issue binding. Green light blinks and module is blinking green after hitting bond button. But it stays blinking and will not bind. I followed your video to the t and still nothing. Is the crossfire nano receiver bad ? Thanks man

[@blizzardfpv9584]

i still refer back to this video every time lol

[@kanicdog]

Can you do a video on wiring battery direct to this receiver. I use it on an rc plane with just servos and would like to know my battery voltage with telemetry

[@marcusgrip]

Did this and it worked, now for some weird reason it doesn't. haven't soldered anything, the rx and controller still connects between each other but in betaflight and real life, no props are reacting. ideass?

[@alien-oo-_-oo5732]

I have a question, does it make a difference if it says R3 T3 on the flight controller and not RX3 TX3? I have a t motor f4 flight controller and it only says R3 T3, I’m very new to this and don’t know if that matters.

[@Sabritelol]

if I have different colors for the wires. Let's say for instance I have green and orange. Can I name them like Green : TX Orange: RX So, therefore, TX on the nano pad ill solder it to the RX on the FC pad. The same goes for the RX. Because on the nano manual they name the pads as ch1 ,2,3,4

[@pilotsombong]

someone told me that the receiver should be tx1 and rx1 because they are more responsive. is that true? please answer

[@pelvinsjamz]

Trying to connect express lrs namimno flash 2.4ghz to my f3 mini magnum , ( baby hawk r ). missing a rx port any help ? / ideas ? ( white wire ) currently not connected. Both module and receiver are flashed and bound via wifi . Showing connected on my jumper t12 pro Or is it a beta flight configuration issue .

[@BrandinoTheFilipino]

what do i need to power it without a battery like in the video??

[@peek2much3]

where did you get that vise grip man? can you share the link if you have it bud please? thanks

[@meltonenterprises6761]

So to clarify we need to purchase the crossfire system in order to utilize these on our kwads?

[@mafiafpv3469]

So I set up everything and it works awesome but.....I'm on 868hz and I'm in the US and when I select 915hz it makes me receiver turn red??? Any idea?? Do I have to re bind it????

[@Bzl_777]

How to setup tbs nano rx on kiss fc v1 ?? Please help I already bought everything and now I couldn't find the tutorial video for kiss fc v1. That shows tbs nano setup for kiss fc v1 I want to use smart audio or anything that allows me to tune my pid via either OSD or my radio need help 🙏

[@djrodriguez6582]

my sdcard menu on my tx is empty. if i buy an sdcard to throw in it, where would i get whatevers supposed to be on it?