Drawer of hand tools at a glance / DIY

[@Ghust2]

When you install the rails in the cabinets, you use a spacer. When you mount the other part of the rail on the drawer, you use a jig with another spacer. How do you ensure they are lined up? Let's say the small spacer (drawer) is 2cm high. Do you (in the cabinet) then simply start 2.5cm from the bottom and use your regular block for the steps? Hard to explain, but I'd be scared not to have it line up :) Beautiful video by the way, I'm going to attempt building this for under my new workbench

[@Kynosys_]

It's not easy to explain. The height of the interior space is h, Let the number of drawers to be created be n and the distance between drawers be t. First, subtract t from h. The reason t is subtracted once is that there is one more interval than n. And when h is divided by n, the number is the sum of the height of the drawer and the distance between the drawers. In other words, the number obtained by subtracting t from that number becomes the height of one drawer. Now, the number obtained by subtracting the width of the rail from the height of the drawer and adding the distance t becomes the height of the jig to be used. If you put the chest of drawers upside down and attach the rails using this jig, The spacing between them is exactly right. The rail attached to the drawer can be known by looking at the structure of the drawer rail, and you can make a jig at that height. If you think about it carefully, you will understand. thank you

[@Arther42Dent]

@@Kynosys_ Great explanation, that's helps me to make my own number of drawers! Thank you so much!!! Go on with your great videos, it's everytime impressive and innovative. I like it!!!! 👍☺☺

[@jordan201147]

Do you have plans for this?

[@mundhiral-kiyumi8300]

@@Kynosys_great video just ignore the negativity thanks for sharing ❤❤

[@paullalekna5478]

@@jordan201147 Develop your own... I can

[@KeveryKat]

Its like a museum! I would love to just wander around in there for a whole day!

[@Kynosys_]

If you're close by, I'd love to invite you. I think people who love tools have similar thoughts. Thank you for supporting me.

[@patbird9694]

Every time I watch your videos I learn something new. Even though I have been woodworking for 25years.

[@Kynosys_]

I believe that a true confession is not something that anyone can make. Only a special person with a spirit of tolerance and humility can do this. I am very happy that my little talent can be of help to you. We all learn from each other. I will also learn from you. I would like to express my sincere gratitude.

[@je-fq7ve]

this is why you build your own. the vast majority of hand tools are under 2" tall lying flat. Look at almost every tool box all tall drawers that make you pile your tools up.

[@Kynosys_]

You are pointing out the facts. I needed a chest of drawers that could hold a lot of hand tools while being flat. When the tools are tangled, it is very inconvenient to pick and use. This is something that many of you have thought about. I hope I can be of little help to you. thank you!

[@SDGAMESbr]

UAUU, MUITO INCRIVEL , MUITO LINDO E SUPER EFICIÊNTE .

[@Kynosys_]

Thanks for your interest!!

[@vplph]

Mix wide and deeper drawers close to each other is practical

[@Dancing_Alone_wRentals]

tHanks for the video....I build a home made tool box a million years ago and have been buying them ever since....Time to go back in time.

[@Kynosys_]

You are more experienced than me. Old memories are always sweet and nostalgic. I don't know how you are now, but I'm nearing an age where I'm going to miss the days when I was full of energy and making things up. I'm glad you reminisced about your youth in my video. I hope you are always healthy. thank you!

[@Dancing_Alone_wRentals]

@@Kynosys_ wishing you health & happiness too......Oh and more Baltic Birch plywood!

[@erictheviking672]

Great build. I would have put fronts on the drawers as my workshop is very dusty. Actually I wouldn't, as I doubt I have the skill and patience to make such a lovely unit,but you get my drift! Thanks for sharing.

[@Kynosys_]

In South Korea, there is a saying, “If you just start something, half of it is already done”. Just start. Your talent will lead you to create great work. When you start, I hope my video will be a small clue. Thank you for your kind words.

[@CharlotteVanDerLinden-i5p]

Very amazing great build

[@timothybaker8234]

You have my absolute dream shop. I’m glad I found your channel.

[@Kynosys_]

Well done. You found my channel. I'll be sure to show you what people mean by the word undervalued blue chip stock. thank you

[@nmartin5551]

I wish building it was as easy as watching the video!!

[@Kynosys_]

I think a lot of people are enjoying this video, so I'm going to upload a blueprint with accurate dimensions soon. If you look at the blueprint, you will be able to make it easily. thank you!

[@mundhiral-kiyumi8300]

Thanks for sharing this beautiful build is there any drawings I might make the same thing

[@Factory400]

If I started this today.....I may set a completion date around 2095 or so. Roughly. Amazing to watch it come together!

[@Kynosys_]

There is a saying in South Korea that "starting is half the job". If you make up your mind and start, you will be able to finish it without difficulty. Actually, it took me about 2 weeks, so it would be good for you to set aside enough time. thank you!

[@giovannitrezza-tg4qj]

Bellissimo progetto complimenti 👏👏👏

[@Kynosys_]

Thanks for your praise!🫡🫡🫡

[@henryrossouw930]

Great Great build.Im going to change mine into one like yours.Just discovered that mine wastes a lot of space.

[@Kynosys_]

You understand. As expected, if you want to use the tools with them spread out and visible, it seems to be advantageous to have a low height and wide space. Thank you very much.

[@piccoloangolofaidate767]

Bel lavoro. Complimenti. Anch'io vorrei iniziare a sistemare il mio garage fai da te e questi suggerimenti aiutano molto. Grazie.

[@Kynosys_]

I am also glad that I was of any help to you. I will try to show you more useful and diverse videos. thank you

[@franciscolopezjimenez1406]

Menudo trabajazo. Un saludo.

[@Kynosys_]

Thanks for your praise!

[@genewhitesides2722]

Beautiful work great design. Liked and subscribed. You should be making and selling plans, you deserve to be compensated for your work.

[@HaneulsSpace_WoodStory]

멋진 수공구함을 이렇게 손쉽게 만드시다니 부럽습니다 자주 와서 많이 배우고가겠습니다!

[@Kynosys_]

열심히 저도 배우고 있는 중입니다. 같이 노력해서 많은분들과 결과물들을 공유해 보셨으면 합니다. 감사합니다.

[@jenniferhilliard6910]

WOW! I love this! Do you have plans available ?

[@A.KUDYBA]

This is real perfectionism my friend! This is very cool! You are well done thank you!!!!!!!!!

[@alexdegens2797]

Great work!! Do you have any plans or measurements for the cabinets?

[@Kynosys_]

I uploaded detailed design drawings to the 3D Modeling category of my channel. Please note. thank you

[@jimrosson6702]

Very amazing great build

[@Kynosys_]

There is a saying that praise makes even a whale dance. Thank you for your kind words, I will try harder. I need to prepare a cool video.

[@khushkarandeogun5678]

This man is showing off his tools lol

[@Kynosys_]

It is accurate and true. My tools collected over 25 years deserve such treatment. I'm not just going to show off, I'll invite you on a DIY journey using these tools. thank you.

[@bladen0869]

Yep and rightfully so! The man is proud of his collection and passion of said tools. I’m happy for him!!!

[@Kynosys_]

@@bladen0869 thanks for your point.

[@atmoejo_woodworking]

Hello , Very good and very inspiring I'm from Indonesia

[@Kynosys_]

Even if the country and race are different, it seems to be the charm of KZbin that you can enjoy together. Thank you very much for your compliment.

[@mikeking7470]

Very nice build, I am not sure tools in drawers is for me, at least not all tools, but a good idea for the specialty tools.

[@Kynosys_]

I've been working on making various things myself, so I've got quite a lot of hand tools. My wife often criticizes me for having more than necessary, but to some extent it is true. I have a desire to try many, if not all, of the tools myself. I believe that this kind of thinking can suggest a new direction for my work. Thank you for your interest.

[@valterp528]

great work

[@Kynosys_]

Thanks for your praise!!!

[@WorkingViews]

very impressive! you are becoming quite the woodworker indeed. I need some organization like this.

[@Kynosys_]

As you can see from the way I work, I'm not really an orthodox carpenter. I have a dream of making something new, but I'm still working on it because it's hard without basic carpentry work. I watched your channel. By the way, you're not doing woodworking as a hobby, are you? You look like a professional carpenter when you see the tools and surroundings that are so natural in your workshop. I guess I have a lot to learn. I will also watch your videos often. I also subscribed. thank you!

[@RedcarWW]

I love this setup. Wish there were plans I could buy. For the backer, is 12mm or 1/2" ply? I am sure I'll have some more questions. Thank you.

[@mikeburris9856]

I love the cabinets. But if this is in woodshop then those drawers will be full of dust in a real short time wont they? Not to mention the slides as well.

[@Kynosys_]

This is a correct point about not finishing the front of the drawer. However, I don't really like the finish on the chest of drawers. It feels like the finish of home furniture used in the living room. You don't have to worry about dust. There are a lot of dust collection facilities in my workshop. It is structured so that dust can never reach the chest of drawers. Various dust collection system related videos I made will be uploaded as a series soon. In particular, the workbench I named the sanding base is the key. You too will be able to enjoy it. thank you

[@WolundrForge]

Excellent job !

[@Kynosys_]

Thanks 🫡🫡🫡

[@joseantoniovizcainopajaro526]

Hola buen día, muy interesante tu trabajo, mis felicitaciones, quisiera saber como se llama l atela que usas para que no se rueden las herramientas, gracias

[@curtisg7924]

Very nice work

[@Kynosys_]

Thanks for your praise!

[@dorse72]

omg can you plz come organize my garage 😆 I'm inspired!

[@mikagosz666]

Great project! I'm very curious what kind of countersink drill you use?

[@Kynosys_]

A variety of countersinks with adjustable depth are available. The product I use is made by a company in Korea, my home country, but I am not sure if they are exporting it. I hope you find a good product. thank you!

[@omniwork5621]

Great video, this antislip mats got me so I subbed.

[@Kynosys_]

Thank you very much. I will try to make good videos.

[@JayWye52]

walmart sells rubberized shelf liners in rolls,in their housewares dept. color choices are limited.

[@watanabeisamu1461]

参考になりました、ハンド工具類の収納棚を造ってみます 有難うございます♪JAPAN👍💯🛠👨‍🔧

[@hectorfernandez2900]

excellent, do you will post the plan?

[@Kynosys_]

Many people want the blueprint, so I'm preparing a video that includes the blueprint. I will upload it soon. thank you!

[@MrCarrera28]

Put some kaizen foam into those drawers and that would be spectacular.

[@Kynosys_]

I thought about that too, but I gave up because there were too many hand tools. Instead, a video of power tools installed on a wall under the name of Power Tool Wall will be uploaded soon. Thank you for your interesting comments.

[@Mcphilsmith]

Very nice.

[@Kynosys_]

Thanks to its practicality, it seems to be a work that many people like. thank you!

[@brigitteprovost4306]

Good job! 👍👍👏

[@Kynosys_]

Thanks for your praise!!!

[@Г.Найдёнов]

Инструменты со всего города собирали?) Хорошо сделали.

[@Kynosys_]

В нашу первую годовщину свадьбы 20 лет назад, В подарок от жены я получил электролобзик и дрель. С тех пор я собираю инструменты и запчасти. Это необычная карьера. Подобных инструментов собрано довольно много. Многое из этого вы увидите в моих будущих видео. Спасибо On our first wedding anniversary 20 years ago, What I received as a gift from my wife was a jigsaw and a drill. Since then I have been collecting tools and parts. It's an unusual career. There are quite a few tools collected like that. You will see a lot of it in my future videos. thank you

[@Г.Найдёнов]

@@Kynosys_ Хорошо иметь много инструментов и хорошо иметь жену которая понимает и одобряет Ваше увлечение и дарит правильные подарки.)

[@johndigiovanni]

Awesome job!

[@Kynosys_]

It's still early to be surprised. Prepare the next word to replace awesome in advance. I invite you to a new DIY world. thank you!

[@StephenBaxter-z3l]

Nice unit. How does one get plans?

[@Kynosys_]

I think a lot of people are enjoying this video, so I'm going to upload a blueprint with accurate dimensions soon. thank you!

[@GreatThings8]

Brilliant #Greatthings

[@Kynosys_]

Thank you for your words of praise. I will work harder for a better video.

[@donniewillis2926]

Very nice shop and very nice tool cart!! I have subscribed to your channel after I happened upon this one video. But can you tell me approximately how much plywood it took to build just one of those outstanding tool carts?

[@Kynosys_]

Sorry for late reply Refer this video. Thanks! kzbin.info/www/bejne/j3SWiZuOhteffM0

[@theas9385]

Смотрим из Махачкалы 🙂

[@Kynosys_]

You are a friend from far away. Regardless of region, we who love DIY are brothers. thank you!

[@zaferkibar6489]

hi good work thanks for your video do you have file or dimension list.

[@Kynosys_]

I had prepared a design drawing including figures, but the response was not great, so it was put on hold for a while. I have a drawing file for this work, so I will upload it soon. thank you

[@zaferkibar6489]

@@Kynosys_ thanks

[@zaferkibar6489]

@@Kynosys_ Thank you for your promptness and attention.

[@SegoMan]

You can never have to many tools - however the shed can be to small!

[@Kynosys_]

The world of tools seems so vast. I am so happy about that trip. I think the trip would be even better if you join me. thank you!

[@durthvander]

are there plans available for this build?

[@BioPiekarz]

Awesome

[@gerryvillamarzo5678]

great video, can you share the plan and also how much it cost to build

[@Kynosys_]

I made two, but the materials cost a total of about $350. Birch plywood is a high-quality material, so it is a bit expensive. Also, I tend to work without drawing precision surfaces, but there are many people who want drawings. I am preparing to download the drawing from my homepage. As soon as it is completed, I will notify the channel community. thank you!

[@sailrockpaperscissors8261]

great video do you have cut plan? what size did you use for the spacers for the long draws , looks great just what i need

[@Kynosys_]

Originally, I am a style that improvises works without precise blueprints. By the way, there are many people who want blueprints, so I'm preparing them. I am contemplating whether to upload it as a new video or to download it from the website. I'm preparing hard, so please wait a little bit. thank you!

[@sailrockpaperscissors8261]

@Kynosys_ thanks just some more sizes of the spacers you use on the draw sliders would be great

[@nmartin5551]

I’ll keep an eye out for plans! I’d love to have such a thing!!!

[@mykl1673]

get this man a 3d printer and some gridfinity files asap

[@ErCanEverything]

Good work Bro🙂🤝🤝🤝

[@Kynosys_]

Thanks for your praise!!

[@giuseppecolombo4701]

Una meraviglia complimenti

[@Kynosys_]

Vi ringrazio per i complimenti. Scommetto che vedrai di più. Cercherò di fare video più utili. Per favore iscriviti anche tu. Grazie! Thank you for your compliments. I bet you will see more. I will try to make more useful videos. Please also subscribe. thank you!

[@tehyosh]

what is that spring-loaded thing on your de-walt, which you use to drill the countersink pilot holes? looks useful but i can't find online anything about it

[@Kynosys_]

This is a double drill bit from a Korean brand called EZEN. I was able to purchase it because I am Korean, but I don't know if the company exports to foreign countries. There are many products with similar functions, so please purchase the appropriate product. thank you!

[@Bastelsaal]

Great! Very satisfying to watch! 😀

[@Kynosys_]

Thanks for your praise!!!

[@SGuilarducci]

Sensacional 👍🏻

[@Kynosys_]

Thanks for your sincere words!!!

[@MrHandyDad]

Nice, looks great, not a cheap one tho... FYI for some $$$ math: I counted about $1K US in drawer slides alone...

[@Rimrock300]

Counted $170 in drawer sliders. I just need standard, that do the job, no fancy gold plated ones or something.

[@Kynosys_]

Are drawer rails that expensive? I'm Korean, and it costs about $100 here. This is not a product made at a high cost. I hope you find some inexpensive drawer rails and create something awesome. thank you

[@MrHandyDad]

@@Rimrock300 Math is Hard: 15 drawers w/ Rockler HD Slides @ $48 pair = $720. Tax, Ship was another $114. No Temu slides... Yeah...I rounded off but its ZooTube, Not NASA...

[@vinnyleone3427]

Nice!!!!

[@TTAJ]

Like 영상 잘 봤습니다!! 또 오겠습니다!!

[@Kynosys_]

변함없는 응원에 감사드립니다!

[@HermitHippy]

Huge gaps around the drawers to let the dust in.

[@Kynosys_]

hmm! I've explained this part several times, but I need to mention it in detail in the channel community. Roughly, these things will be mentioned. personal preference. I don’t like things that resemble furniture. Why work dust doesn't reach my dresser. Even the things you leave lying around, the moment you put them in the drawer, you worry about dust.

[@andrysuryadi]

Mungkin sesekali anda harus berkenalan dengan yang namanya lembab dan jamur

[@agustinlosas]

Ola campeón haces carros para bender

[@VVygolovsky]

Интересно, а не провиснет ли фанерное дно такого ящика, когда в него нагружено столько тяжёлых инструментов (гаечные ключи и т.п.)? Многие мастера делают ящики из металлических листов, мне кажется, такой вариант был бы даже легче по весу и прочнее

[@Kynosys_]

У тебя такие же мысли, как у меня. Я удивлялся, почему все сделали его из стали. Преимуществом будет то, что он может быть изготовлен из гораздо более тонкого материала, чем дерево. Однако с древесиной намного легче обращаться, и она прочнее, чем ожидалось. Я даже подумал, что было бы неплохо использовать березовую фанеру марки 9Т. Спасибо You have the same thoughts as me. I wondered why everyone made it out of steel. There will be an advantage that it can be made from a much thinner material than wood. However, wood is much easier to handle and is stronger than expected. I even thought it would be nice to use about 9T birch plywood. thank you

[@mar83161]

I believe that will survive the Apocalypse.😁

[@Kynosys_]

Thank you so much for your wonderful words. I feel like I need to try harder. Please look forward to the next work.

[@mauroalessandroni4866]

ottimo davvero...

[@Kynosys_]

Grazie per le tue parole di elogio. Lavorerò di più per mostrarti un ottimo lavoro. Thank you for your words of praise. I will work harder to show you great work.

[@felixwilliamson4485]

Hello This looks really great and professional! I like it very much! What drawer slides did you use? Can you give me a link for it, or the name so I can buy them in Europe??? Thanks a lot!

[@Kynosys_]

I'm South Korean. It is a drawer rail that is generally used in my country, but I do not know exactly the market situation in Europe. I don't think it's easy for you to buy from the Korean online market. Instead, it seems that Ali Express, an online marketplace in China, ships to Europe. If you sign up for the site, you will be amazed at the great number of products. It is a country that acts as a factory for the world. If you search by drawer rail, you will easily find the product you are looking for. thank you

[@iwantosavemoney]

Man, how deep are those drawers like 2 foot?

[@Kynosys_]

kzbin.infok_kpC8u6KIQ?feature=share

[@jbonn5365]

Nice setup... but man, I gotta ask... How many calipers does a guy need? lol

[@Kynosys_]

Thanks for the good point. However, the reality is this. If you look closely, there are more 30cm rulers. In my opinion, the more measuring tools, the better. I only put them together for this shoot, but they are usually scattered here and there. Rather, there are more times when I think that it is not enough. When I'm working, if you look around my worktable and equipment, you'll understand. In front of equipment costing tens of thousands of dollars, I am very curious when I see people struggling to find measuring tools that cost only a few dollars. Where did he invest in? I think we should save that time. It's an investment in its own right, and well worth it. Thank you!

[@matthewmarcarian7106]

Subbed, but dude, you should consider having a garage sale lol. Nice job.

[@jameshughes7038]

If he sold his garage he wouldn't have anywhere to put his tools LOL

[@Kynosys_]

Thank you for considering that it is also possible for sale. I am trying various things. If you are interested, you will meet many more interesting works. thank you

[@Kynosys_]

@@jameshughes7038Fortunately, I don't have a garage to sell. My tools are well kept in the power tool wall. You will be able to see the video soon. thank you.

[@mariosergiolmottabaccarell2659]

Great!

[@Kynosys_]

Thanks for your praise!!!

[@PASCAL.B556]

Super rangement. Y a-t-il un plan ? Merci beaucoup

[@Kynosys_]

tu es vif Ce que je veux, c'est presque comme "super rangement" en français. J'aimerais y ajouter un petit concept d'automatisation. merci

[@PASCAL.B556]

@@Kynosys_ bonjour. Je voulais savoir si tu avais fait avec des plans pour les mesures. Sinon c'est une très belle réalisation. Bon dimanche

[@adambomb418]

How many sheets of plywood does that take to make both drawers?

[@Kynosys_]

I was actually surprised that it took more boards than I expected. However, I made it with the intention of using it until I get too old and can no longer DIY. If you think about it that way, I think it's worth it. thank you!

[@Alusmer_AEAD]

هل يمكنك إعطائي القياسات لا صنع مثلها وشكرا لك كم انت مبدع

[@Kynosys_]

If you look at my channel, you can find design drawing videos. The wide dresser has already been installed, and other design drawings are being uploaded. thank you!

[@StepperByStepper]

Almost perfekt, you still have a dust gap, I do not know why.

[@Kynosys_]

It's personal preference. For me, if the front of the drawer is tightly closed, it looks like a piece of furniture used at home. My work area has special ventilation and dust collection systems, so there is almost no dust flying towards the drawers. You can see this in another video. Even after several years of use, dust is not a problem at all. thank you!

[@tonymckessar5734]

do you have plans available? I am ready to buy.

[@Kynosys_]

Your word is one of the most valuable gifts a creator can receive. Thank you for your kind words of consideration.

[@Алексей5843]

Зачем столько одинакового инструмента? Одним штангенциркулей 8 штук.

[@Kynosys_]

I am a tool enthusiast. I am also a collector. I also film tool review videos. I just showed you all the tools I collected for this work. Are you uncomfortable? This is to save you the trouble of looking for a $1 tool in front of many expensive machines. thank you

[@Алексей5843]

​@@Kynosys_ну это другое дело, если коллекционер - другое дело.

[@FroxKs]

minuto 5:39, y el misterio de por que guardas 3 cigarrillos en ese cajon jajajaj

[@Kynosys_]

Vorrei ringraziarvi per aver guardato il mio video con molta attenzione. Tutti i prodotti nel cassetto che hai citato sono in realtà accendini. Martelli, pinze, fiammiferi e persino le sigarette che hai menzionato sono accendini. Ho introdotto accendini speciali nei brevi video. Grazie I would like to thank you for watching my video very carefully. All the products in the drawer you mentioned are actually lighters. Hammers, pliers, matchsticks, even cigarettes you mentioned are lighters. I have introduced special lighters in shorts videos. thank you!

[@FroxKs]

@@Kynosys_ hahahaha I suposed! It was just a joke. I'm looking forward to those next videos! Youre good at this

[@올세]

embossed rubber board 정보 공유 부탁드립니다. ^^

[@Kynosys_]

link.coupang.com/a/bBWkTG 바닥에 깐 매트를 말씀하시나 봅니다. 가격비교 꼼꼼이 하시구요^^ 감사합니다.

[@올세]

@@Kynosys_ 감사합니다.

[@alifianmotors4529]

I really like it, can you make a working drawing for me. so I can make it myself at home. greetings from Indonesia my name is Alifian

[@Cjkouhw]

🤩😍

[@АнатолийТаля]

Lot's of toys :)

[@Kynosys_]

While filming the shorts video, I came to collect interesting things. I think you've seen some of them. thank you!

[@윤태근-e9o]

도면이 필요해요😊

[@Kynosys_]

역시 그러셨군요. 제가 원래 설계도 없이 작업을 합니다. 만들면서 맞춰가는 스타일 이라서요. 그런데 도면을 원하는 분들이 많으셔서, 역설계로 도면을 그리는 작업을 하고 있습니다. 거의 완성되서, 조만간 정밀도면을 업로드할 예정 입니다. 조금만 기다려 주세요. 감사합니다.

[@angelnavarrete1901]

Puedes compartir el despieze para poder crearlo

[@Kynosys_]

Se ha subido un vídeo de dibujo detallado. Tenga en cuenta. gracias A detailed drawing video has been uploaded. Please note. thank you

[@aliens1990990]

incredible build anyone got any plans for this? :O

[@Kynosys_]

kzbin.info/www/bejne/hJXLk6Snbpp0rKc refer this video. Thank you.

[@гайтановдмитрий]

Ящик ручных инструментов хороший но направляющие плохие.со времинем шарики выпадают.

[@Kynosys_]

Это базовая направляющая для выдвижных ящиков из Кореи, которую я использую уже два года. В наши дни технологии улучшились, поэтому вещи не так легко ломаются. Исключение составляют китайские товары, которые производятся по очень низким ценам. Китайская продукция, произведенная OEM-методами, также имеет хорошее качество. Продукция DeWalt и Bosch также производится в Китае. Спасибо This is a basic drawer rail from Korea that I have been using for two years. These days, technology has improved so things don't break so easily. The exception is Chinese products that are made at very low prices. Chinese products made through OEM methods are also of good quality. DeWalt and Bosch products are also made in China. thank you!

[@гайтановдмитрий]

@@Kynosys_ сылку можно где покупали???

[@Kynosys_]

Это базовая направляющая для выдвижных ящиков из Кореи, которую я использую уже два года. В наши дни технологии улучшились, поэтому вещи не так легко ломаются. Исключение составляют китайские товары, которые производятся по очень низким ценам. Китайская продукция, произведенная OEM-методами, также имеет хорошее качество. Продукция DeWalt и Bosch также производится в Китае. Спасибо

[@chrissinsigalli7336]

You just need to devote a drawer to candy bars and snacks now

[@Kynosys_]

Do you think this piece would be more suitable for the field? I'll have to do some thinking.

[@MelovesPugs]

This box is amazing. I’m a crafter and I have so many tools. Do you sell the pattern for this box? Thank you.

[@Kynosys_]

I'm still making products that I'll use myself, so I haven't been able to commercialize them yet. I'm planning to upload the design drawings on my homepage soon. Thank you very much for your words.

[@hangten1904]

What is the name of the song in the very end of the video?

[@Kynosys_]

The background music is 'Friday Night Lights - RKVC'

[@Денис-о6о2я]

4:27 излишне уже нагрузили фасад, лаконичные ручки металлические смотрелись бы гораздо изящнее и стильнее

[@Kynosys_]

На самом деле думал поставить металлическую ручку, но заменил на деревянную. Это заняло много времени и было сложно. Я думал, что это будет более подходящим, но ваше мнение другое. Я хочу, чтобы вы посмотрели на это с точки зрения разнообразия. Спасибо! In fact, I was thinking of installing a metal handle, but replaced it with a wooden one. It took a lot of time and was difficult. I thought it would be more suitable, but your opinion is different. I want you to look at it from the perspective of diversity. thank you!

[@bill0118]

I guess you are a tool collector ! Do you really use all of them ?

[@Kynosys_]

You are sharp. Tool collector. I'm a Korean. It's not easy for you to watch my other videos, but I run a tool review channel in Korean. So, there are a lot of tools. I am also an inventor. I have about 20 patents. Someday, I would like to make a video introducing my patented products. Inventions are made purely through my creativity, but in fact, I need materials for my creation. There is nothing like tools as a material for invention. When I look at the development of various tools, I can feel the many concerns of engineers. Of course, my creativity is encouraged. Also, my goal is to use all the tools I have. In that situation, I created drawers that would allow me to conveniently display my collection. I don't mean to brag or be conceited, but I hope this will be of some help to those who want to organize their tools. This is something I've wanted to talk about someday, and thanks to you, I'm doing it. I hope many people read it. thank you!

[@innpressTV]

アメリカ人にしては起用だ

[@Kynosys_]

Surprisingly, I am South Korean. Thank you for your words.

[@MarkH10]

PAUSE @ 4:27. If you don't see that, I can't help you. I saw that shot for less than 3 seconds and it jumps off the monitor.

[@Kynosys_]

Does this mean I showed too little? I don't know exactly what it means.

[@MarkH10]

@@Kynosys_ The bottom handle jumped right out at me, it is pretty far off level.

[@능지처참-i7c]

아트의경지에 오르신분...

[@Kynosys_]

조금이라도 새로운걸 만들어 보고 싶은 마음을 이해해 주시는듯 합니다. 머리속을 풀어 헤쳐 보이는게 주변에 부담인 시절이 있었는데, 그걸 유튜브에서 해보고 있네요. 더 새롭고 유익한 영상을 위해 노력하겠습니다. 감사합니다.

[@epanfletagens]

Wow

[@Kynosys_]

Thank you for your interest!!!

[@АлексейШейкин-э1ш]

Клёвый ящик молочвга

[@Kynosys_]

Thanks!!!

[@irokez62]

А нахрена ему столько одинаковых пассатижей и переставных ключей? Он ими торгует?))

[@Kynosys_]

В мастерской, я думаю, чем больше измерительных инструментов, тем лучше. Я не понимаю людей, которые тратят свое время на поиск очень дешевых измерительных инструментов, используя при этом очень дорогие машины. Немного подумав, вы поймете, что лучший способ сэкономить время - это иметь под рукой необходимые ручные инструменты. Тем не менее, я готовлю несколько основных инструментов. Я не считаю это тратой. Я думаю, что это инвестиции, которые могут сэкономить мое драгоценное время. Спасибо! In the workshop, I think the more measuring tools, the better. I don't understand people who spend their time looking for very cheap measuring tools while using very expensive machines. With a little thought, you can see that the best way to save time is to have the hand tools you need all over the place. Even so, I prepare several basic tools. I don't consider it a waste. I think it's an investment that can save my precious time. thank you!

[@gbwildlifeuk8269]

I think the main problem was too many tools! Do you REALLY need so many long nosed pliers? Verniers? Squares etc?

[@Kynosys_]

Does it look like my tools overlap a lot? I offer a few points of view. The more measuring tools, the better. The time saved well exceeds the cost. Of course, I use almost all of them. If you look at the workshop when I'm concentrating on my work, you'll understand, but surprisingly, I still lack tools. It is very difficult to clean and work. After a project is over, it is a picture of the messy tools gathered together. Some of them are tools I use when I do review and unboxing videos. Introduce new products or shoot shorts videos. My goal is to try a lot, if not all tools in the world. Of course, as much as circumstances allow. Your interest helps with that. thank you!

[@gbwildlifeuk8269]

@@Kynosys_ "the more measuring tools the better". So if you need to take 8 measurements, you need 8 verniers? Yeah right!

[@Kynosys_]

@@gbwildlifeuk8269 Actually, there are more. The most expensive of my machines is around $50,000. I don't understand people who wander around looking for a few dollar measuring tools in front of such expensive equipment. That's a waste of your time. I am speaking from that point of view. The video of the power tool wall I made will be uploaded soon, but I think you will be embarrassed again. I have over 30 drills. Let's enjoy it together. Thank you!

[@gbwildlifeuk8269]

@@Kynosys_ "but i think you will be embarrassed again" you think I'm embarrassed! 😂😂😂 Remember, a craftsman uses tools, an amatuer collects them. Bye

[@Kynosys_]

@@gbwildlifeuk8269 word "embarrassed" sorry. I remember. Thanks!

[@YU_T8]

бестолковая работа и потом ещё бестолковей когда начнешь что то делать, пример: ремонт какого то механизма , за каждым ключом гаечным не набегаешься а ещё и молотки, выколотки и возможно штангель .... возможно прокладку рубить и т д, полдня бегаешь а на завтра ещё пол дня на место все разложить Проще сгруппировать инструмент по задачам, допустим ремонт механизмов, сварка, столярная работа, ..... на каждую комплектуется сумка или короб, и несколько универсальных, типа - резать прокладки или измерительные, или клеи, метизы и подобное , по надобности берешь пару таких ящиков с инструментами и прочее принадлежности, на месте высыпал на брезент и работаешь по окончании собрал все в сумку и ушел))))

[@Kynosys_]

Спасибо за ваши хорошие комментарии. Кажется, это особенно желательный метод, если вы работаете на улице. Я не работаю снаружи. Поскольку я работаю только в своей мастерской, поддерживать порядок очень удобно. И еще: я делаю обзоры инструментов в Корее. А поскольку я изобретатель, машин и деталей больше, чем вы можете себе представить. В ящиках более 2000 деталей. Итак, если я не уберу это хотя бы на мгновение, это превратится в огромный беспорядок. Эта работа особенно необходима таким людям, как я. Еще раз спасибо. Thank you for your good comments. This seems to be a particularly desirable method if you work outside. I don't work outside. Because I only work in my workshop, It's so comfortable to stay organized. And one thing, I do tool reviews in Korea. And since I am an inventor, there are more machines and parts than you can imagine. There are over 2,000 parts drawers. so, If I don't clean it up even for a moment, it becomes a huge mess. This work is especially necessary for people like me. Thank you again.