Drawing on metal. Updating an old ax. Draw on metal.

[@ags3499]

Работа просто шикарна,техника исполнения выше всяких похвал,супер!

[@SUPERNATANBOXER]

Охринеть... Просто слов нет как же круто!!! Спасибо большое за то что под видео расписали все процессы!!!

[@artisticdoodoo6519]

NOTHING SHORT OF SPECTACULAR, FROM TECHNIQUE TO APPLICATION TO CHOICE OF DESIGN. I HOPE YOU'RE COINING IT MATE. PURE CRAFTSMAN. PEOPLE OFTEN DISMISS THINGS LIKE THIS (NOT ALWAYS NEGATIVELY) AS INHERINT TALENT RATHER THAN THE SELF DISCIPLINED, LONG, HARD, TIME DEDICATION OF EARNED SKILL. MASTERFUL.

[@KirillRunz]

Thank you for your attention.

[@cuchuflitox]

Excelente trabajo, una obra maestra Es de apreciar que indiques el paso a paso de tu trabajo, así se podemos comprender que sucede y cómo, es de mucha ayuda para también a los que desean hacer un trabajo tan detallado y artístico como el tuyo, ver tus obras es inspirador Saludos desde Argentina!

[@KirillRunz]

Gracias. Aprecio tu atención. Saludos desde Ucrania.

[@catroventos6028]

Cierto, el video resulta entretenido pero no es muy util, falta mucha informacion para q sirva de algo a quien lo quiera practicar, sobre todo la trasferencia del dibujo al hacha, tipo de lapiz o rotulador o lo q sea, tipo de pintura blanca, y el otro spray.... no vale un like, lo siento.

[@ЖеняШиков-с4р]

Очень кропотливая работа,но результат потрясает своей красотой.Браво! Настоящий мастер!

[@MrJmita]

I just love watching you and your incredibly beautiful workmanship it takes a lot of patience to create what you have keep up the awesome work thank you for sharing your incredible skills

[@ТарасЖивчик]

Дуууже гарно! Національність і атмосферність пре через край!

[@cotteeskid]

Greatly appreciate the individual steps listed in the description. Cheers

[@bogusawkaminik5895]

Witam . Chciałbym próbować gdzie mogę znaleźć takie rysunki 👍

[@ttoddh1]

You are a true artist. Thanks for sharing your great talent!

[@KirillRunz]

Thank you for your attention to my work.

[@askal916]

Great job. I wish more youtube artists would create a written list of steps like you have. It is very helpful. I am going to try to make one for my son. Thanks for sharing this.

[@KirillRunz]

Thank you. I appreciate your attention. Observe safety precautions. I wish you creative success.

[@ХитрыйЛис-э7у]

Отличная работа братан. Красавчик!!))👍👍👍

[@artem_arkov]

За козацьку тему, лайк та підписка одразу!

[@KirillRunz]

Дякую.

[@игорькоч-ь7г]

молчание золото прям тащусь от того что нет словесной жеванины Шикарно как обычно

[@KirillRunz]

Большое спасибо)). Обычно на молчание все жалуются.

[@federicocaporasoseppi3438]

Complimenti 👏👏👏👏, una vera opera d'arte. Fantastico

[@giovanimigoto5489]

Sem palavras aqui,cada trabalho um show a parte que Deus abençoe sempre vc com essa sabedoria esplendorosa parabéns 👏👏👏👏👏👏👏👏😍👏😍👏😍

[@KirillRunz]

Obrigado pela atenção ao meu trabalho.

[@yuriysteblak6979]

Блестящий урок, подробно и по делу за семнадцать минут.

[@KirillRunz]

Спасибо. Ценю Ваше внимание.

[@adamszczepkowski590]

Brawo!! Podałeś bardzo dokładnie i przystępnie technikę jestem pod wrażeniem. Trawiłem elektrolitycznie miedź, mosiądz i srebro i zawsze osiągałem dobre i czyste trawienia. Można skorzystać z FOTOLAKU Positiv 20 i będzie jeszcze łatwiej

[@KirillRunz]

Dziękuję za uwagę. Pracowałem z filmem Resist i niestety nie nadaje się to do obiektów o skomplikowanych kształtach. Ale podobała mi się jakość. Dzięki za radę.

[@kar-heinzzerwofski1091]

Bin schon älter und kann mir alles nicht so schnell merken um deine Technik zu versuchen .Aber ich werde es immer wieder versuchen Tolle Arbeit Es grüßt Dich Karl

[@christosmit4691]

Amazing work man! You're a true inspiration.

[@KirillRunz]

Thank you. I appreciate your attention.

[@linobandera]

Continuo a guardarli e sono sempre più affascinato. Complimenti.

[@KirillRunz]

Grazie per l'attenzione.

[@nightwalker5278]

Stunning, Incredible skill and talent. Thanks for sharing.

[@KirillRunz]

Thank you. I appreciate your attention.

[@joshschneider9766]

Wow. Just wow. I would not have thought such a transformation possible. Wonderful work sir.

[@joshschneider9766]

Also thanks a ton for English spray can info lol

[@KirillRunz]

Thank. I appreciate your attention.

[@globeeartheulogy9126]

I really appreciate your help buddy! Your a true artist 🤙🏼🇨🇦

[@PapounetUT]

Quel talent. Un vrai grand artiste.

[@KirillRunz]

Merci pour votre attention.

[@annotten7413]

A lot of work but a great end product - thanks for sharing your art work

[@KirillRunz]

Thank you for your attention.

[@JoJoAcrylicArtwork]

Fantastic result! Gives me so many ideas. Thank you

[@KirillRunz]

Thank you for your attention.

[@joshschneider9766]

I can see this mounted on the door of an imposing castle as a menacing knocker

[@curtis1gillis]

That's truly beautiful work , just amazing

[@KirillRunz]

Thank you. I appreciate your attention.

[@youriyua611]

Гарна сокира! Ви майстер своєї справи.

[@RCnerd74]

A lot of work... but the result is worth every minute!

[@kasperua.7405]

За Козаків! Лайк!

[@KirillRunz]

Дякую

[@dmytroavramenko2833]

Парень ты крут. Впечатляющая работа.

[@alekc6998]

Priekrasnaja rabota, spasiba!

[@glennwall552]

Wonderful artistry extremely talented. Thank you.

[@hbslijper]

Really impressive how you do this, I have admiration and respect for that...

[@juanleano6718]

Amigo que buen video pero seria mucho mejor si lo explicas y si das los nombres de los materiales q usa mas que todo las pinturas gracias saludo desde Venezuela

[@alejandro.humoffe]

Está todo detallado , materiales y paso a paso en la descripción del vídeo amigo. Minuto a minuto

[@DuralMetalurg]

Дуже класно вийшло, що тут ще скажеш ;) Бачу по коментах що всім сподобалось, ну ще б така робота могла і не вгодити :)

[@Gearhead-en8dz]

Inspirational and informative. Exceptional piece of art!

[@delareynienicolas9467]

Great job ! Beautiful artwork 👍

[@olegzahorodnii7986]

Круто 👍, я теж надав старій сокирі нову форму, і клеймо виробника зварив і зашліфував. Варив електродом цу5 2.2 не зараз, щоб не перегріти. Правда саме клеймо необхідно добре очистити щоб уникнути пор по зварці.

[@SuperD37]

You are a gifted artist. Thanks for sharing.

[@KirillRunz]

Thank you. I appreciate your attention.

[@jasondutchman6736]

Awesome job!!!

[@teamliquid15]

Скажите пожалуйста что вы делаете на 1:49?С уважением.

[@KirillRunz]

Шлифую металл, стачиваю острие, для того чтоб при травлении его не "съело". Потом, покрываю металл краской.

[@teamliquid15]

@@KirillRunz Спасибо

[@wetdewlap8741]

Beautiful done !!

[@KirillRunz]

Thank you.

[@VeradonaRestoration]

Wow, you are very talented, thank you for the video :) Radek

[@clayfeathers]

Beautiful artwork! ❤️👏👍

[@KirillRunz]

Thank you for your attention.

[@РоманТкаченко-ы2ъ]

Чудова робота!! Однозначно ЛАЙК!!!

[@KirillRunz]

Дякую

[@pauloguilhermebragavargas6376]

Parabéns!!!.. Belo trabalho!!!.. Uma verdadeira obra de arte. Showww......

[@KirillRunz]

Obrigado. Eu aprecio sua atenção.

[@Hutchy45445]

That looks amazing! Great video 👍

[@NN-lr1ck]

Дякую ,дуже цікаво . Ви майстер з великої літери.Вітання з Кривого Рогу.

[@KirillRunz]

Вам дякую за увагу. Вітання з Сум

[@dwood1332]

так ты творец!!!👍👍👍красивый топор!🔥🔥🔥

[@foxysan7418]

Подскажите что вы за пленку используете что бы рисунок переносить на краску

[@denislatovin1427]

Мне тоже очень интересно , что за пленка используется и ручка - гелевая или шариковая обычная ?)

[@alexandrtarnavchyk6416]

Також хотів би дізнатись що за плівка, як її купити

[@KirillRunz]

Это калька. Где купить не знаю. Мне ее подарили целый рулон. Она матовая с одной стороны. По ней хорошо рисует простой карандаш. Потом перевернув ее и продавив ее карандашом с обратной стороны, след отпечатывается. Рисую я мягким простым карандашом с тонкими стержнями 0.5 мм. Они должны быть в продаже в любых канцтоварах.

[@monz-hk3ey]

Неперевершена робота 🔥🤩👍

[@KirillRunz]

Дякую.

[@geraldinerice5371]

What u could do is , if u want, and what I've seen others do, is put the pieces we've just seen u make, up for sale or auction. If u dont want them. Its beautiful.!

[@KirillRunz]

Thank you for your attention. I do not regularly sell products.

[@tonyfogerty4952]

What is called the browning liquid ? thank you.

[@KirillRunz]

Thank you for your attention. This is a special liquid based on nitric acid. It is sold in weapons stores and is used for redecorating metal coatings. If the black coating of the weapon is badly scratched, then these scratches are hidden with the help of this liquid. I use this fluid to give more contrast to the pattern.

[@tonyfogerty4952]

@@KirillRunz Thank you very much, you have been a great help to me, l also make viching hatchets , l am writing to you from Italy.

[@freedomshallrain4272]

What do you use for the current? Battery back? How long do you leave it in there?

[@rotarusergiu9077]

at min 07:10 what is there in the bucket, it is only water ? thanks

[@GT_Racer347]

That was awesome. 👏👏👏

[@KirillRunz]

Thank you for the comment.

[@antonrozbaum]

Красавчик!!!! Успехов тебе во всех будущих начинаниях!!!

[@KirillRunz]

Спасибо. Ценю Ваше внимание.

[@gabrielmilioto8341]

great work !! , with compliments 👌👌

[@lordhovado9018]

06:13 I connect a copper plate - the Cathode ("-"). Anode ("+") - connected to the ax. The electrochemical process of metal etching takes 10-12 minutes. I have question: which value ampers you set on welding machine? thx for respond. p.s. your work is amazing

[@KirillRunz]

Thank you for your attention. Welding machine at minimum setting 20 amps / 20.8 volts.

[@Абсурд88]

Браво! И за выбор рисунка лайк

[@waltercobb4675]

Great skills

[@beylerbeyitas4319]

Sehr schöne Arbeit 👏🏽👏🏽👏🏽

[@KirillRunz]

Vielen Dank für Ihre Aufmerksamkeit.

[@grahamparr4710]

Interesting, what will you do with it now? cannot really use it to get knocked about and ruined, is it for display?

[@KirillRunz]

If I understand you correctly. This subject is fully functional, it can be used for its intended purpose. The picture will not suffer because it is made of metal. Unless if you chop them with bricks.

[@grahamparr4710]

Kirill Runz that's great, perhaps some narration would have helped👍👍

[@international9702]

Отличные топоры👍 на ютюбе лучше ваших работ еще не видел! На каком ампераже травите?? И что это у вас за пленка такая?? Зарание спасибо

[@MrRicardocavalera]

once again you blew my mind bro.. another big 👍 from Portugal.. 🤘😷🤘

[@KirillRunz]

Thank you.

[@glasscitysocialclub]

What is that clear "paper" for transfer? And what etching chemicals are used? I'd love to try this with my bladesmithing.

[@KirillRunz]

Some videos have step-by-step explanations in their descriptions.

I don't have nitric acid, can i replace it with fecl3? thank you

[@KirillRunz]

Yes. Ferric chloride will be even better in a way. I myself plan to use ferric chloride instead of nitric acid in the future.

@@KirillRunz Thank you for sharing your valuable information

[@MadDogSpirit]

Nice job! What’s the product in 8:46? I can’t read the name on the bottle

[@KirillRunz]

Thank you. This is 5% nitric acid. See the description below the video.

[@GarrisZon14]

Скажи пожалуйста, ручка которой переводишь рисунок на плёнку-гелевая?

[@KirillRunz]

Нет. Это не ручка, это простой, мягкий карандаш с тонким стержнем.

[@GarrisZon14]

@@KirillRunz спасибо. Уважение к Вашему труду

[@KirillRunz]

Вам спасибо за внимание.

[@danielglosser7625]

Great looking work we just wish we knew what you are using and why? Could you explain or have a way of communicating the chemicals used?

[@KirillRunz]

Thank you. I appreciate your attention. In the description below the video, I provide step-by-step explanations.

[@Ouroborus.83]

Просто вау!! как всегда топ))

[@KirillRunz]

Спасибо.

[@Activemsk]

Хорошая работа!!

[@alessandrox6237]

Sorry, but what liquid did you use after the nail polish? from video 8.50 onward?

[@johnfolchini5314]

Incrível sua arte belo trabalho, parabéns ganhou um inscrito abraço aqui do Brasil.

[@KirillRunz]

Obrigado pela sua atenção. Saudações da Ucrânia.

[@ristonmais4694]

Would a method very similar to this maybe minus the acid and nail polish work on a small stainless steel necklace piece for small intricate writing?

[@KirillRunz]

Yes, it will work. For stainless steel, the electrochemical method of metal etching in a water + salt solution is suitable.

[@ristonmais4694]

I’ve tried doing it with the enamel spray paint method. The only problem is when I scratch out my design the paint never leaves a clean edge. How do you fix this?

[@mikemi47]

Ok. What is the bench tool called that you use for grinding/sanding/sharpening/sanding? I’ve never seen one like that with an open single wheel, and it looks super useful

[@philiphoward7426]

Awesome design and great drawing talent! Nicely laid out and positioned. Just wish that there would have been some audio to explain the voltage, chemicals and copper metal usage. Thank you for sharing, just beautiful!! Have a great day, Heartinstructor!!

[@KirillRunz]

Thank you. I appreciate your attention. I try to explain the process in the description below the video.

[@basiliolara4167]

Very nice job,

[@mattt6854]

What was that jar of liquid right at the end which turned the metal black?

[@KirillRunz]

Thank you for your attention. It is a liquid for cold bluing metal. Bluing as a weapon. It is used for redecorating bluing on weapons.

[@TheVigilantShepherd]

Amazing result! Very good job!

[@KirillRunz]

Thank you for your attention.

[@bruinflight]

Brilliant work! As always, a resourceful mind and beautiful results.

[@KirillRunz]

Thank you.

[@bruinflight]

Kirill Runz friend, can you tell me what the substance is that you sprinkle on the billet before the first forging and subsequent forging? You always sprinkle this strange substance on the hot billet at your anvil. Is it bismuth?

[@KirillRunz]

I do not do forging. What do you mean?

[@bruinflight]

Kirill Runz you have a bowl of strange material that you sprinkle on the hot billet. I am curious what this material is. Perhaps it is bismuth? Does this material help reduce oxide?

[@sabedoriaaciencia]

Grande artista 👏👏👏👏👏👏👏🤩👏🤩.

[@KirillRunz]

Obrigado pela atenção ao meu trabalho.

[@ZOREDA100]

very good video I want to do this in stainless steel, do you know how I can put the black background in stainless steel? THANK YOU

[@Mrjacks56]

merci pour les explications bonjour de Liège Belgium

[@KirillRunz]

Merci de votre attention. Salutations d'Ukraine.

[@odiogoponto]

This is way too cool!

[@KirillRunz]

Thank you. I appreciate your attention.

[@rafaelchagas4716]

Hello all right, I'm Brazilian I discovered your channel today I thought it was fantastic, I would like to know if it is possible for you to say which liquid you use to oxidize in the first step and the rectifier you use, I'm excited to try to do some engraving too, thank you already , I am happy to subscribe to the channel only work Fantástico.

[@KirillRunz]

Thank. I appreciate your attention. Greetings from Ukraine. Please see the description below the video. Everything is indicated there step by step.

[@rafaelchagas4716]

@@KirillRunz tank you for atencion

[@harrytazmeade3862]

What are the words at the bottom and their meaning?

[@ДаниилДаниил-л6ь]

Cossack fate - steppe and freedom

[@forestmorris2996]

Question: After you finish polishing and you get ready to spray the metal with the Alkyd spray paint, do you do anything to clean off the metal before you spray the paint. I am about to try this and I was just wondering. Thanks in advance!

[@KirillRunz]

Thank you for your attention. Before applying paint, I usually top-etch the entire surface of the metal. This way the paint adheres better to the metal. But you don't have to. Then you need to work more carefully with the paint.

[@forestmorris2996]

@@KirillRunz ok. I understand now. Thank you for your response!

[@viflag62]

C'est la borne + pour la tige qui passe par le trou de la hache ?

[@maoescobar6989]

The video shows the process of restoration and alteration of the old ax. Drawing a picture on an ax by electrochemical and acid etching. During any work, the relevant safety precautions must be observed. Shown in the video is not a role model. 01:30 I cool the metal with water so that the ax does not lose its hardness (hardening). 02:08 I paint an ax with an alkyd aerosol primer. I put three layers of primer. 02:26 I paint an ax with alkyd aerosol white matte paint. On a white background it is more convenient to draw. 02:40 Sketch of the picture. 02:45 I draw with a simple pencil on a matte film for drawing. 03:30 Turning the film over, I print a trace of a pencil on the paint. 04:40 With a pointed metal rod, I clean off the paint in those places where the metal should be etched. 05:30 In five liters (5l.) Of water I add 350-400 grams of edible salt. 06:13 I connect a copper plate - the Cathode ("-"). Anode ("+") - connected to the ax. The electrochemical process of metal etching takes 10-12 minutes. 07:46 I paint over metal sections with nail polish. This will protect them from acid exposure. 08:43 I pour 5% nitric acid into a cropped plastic bottle. Metal etching occurs in nitric acid for 25-30 minutes. 10:47 Using a solvent, remove the nail polish. 11:04 I grind the metal surface using sandpaper from P600 to P2000. 12:34 To blacken the metal, I use a special liquid for cold burnishing of the metal. 12:56 To completely neutralize the acid, I smear the metal with soap and mine in water. Soap is an alkali. Alkali neutralizes acid. 13:41 I lubricate the ax with machine oil and heat it. Moisture evaporates, and oil penetrates the micropores of the metal and protects it from oxidation. MOSTRAR MÁS

[@maxk5065]

how much electricity (volts and amperes) do you put in your electrolyse step?

[@pvpv6969]

Beautiful, what is the stuff you dip it in to make darker?

[@KirillRunz]

Thank you for your attention. Please specify at what minute in the video you are interested in ?.

[@MartinMcDermot]

How long is in electricity box?

[@ahoradogaionairo9423]

Qual a fonte de energia vc usa?? É 12 volts ? Seria por exemplo, uma fonte de computador ai ligo o - na peça e o + em um cobre direro no balde????

[@pavolsimko3030]

Can you tell me,how many ampers did you use for etching?Thanks

[@KirillRunz]

Thank you for your attention to my work. I use 20 amps.

[@alexbarcelos3643]

Simplesmente perfeito ... Uma obra de arte ,parabéns

[@KirillRunz]

Thank you

[@julengarate2139]

Tengo una pregunta ¿Al hacer la electrolisis el voltaje y el amperaje de cuanto debería de estar?

[@KirillRunz]

Los ajustes mínimos para la máquina de soldar. 20 A / 20,8 V

[@julengarate2139]

@@KirillRunz Gracias!!

[@h.schultze264]

Скажите, пожалуйста. Сама пленка, она односторонняя для принтера? Или это какая-то особенная? Спасибо