Dremel 3000 "FULL Review" Unpack & Demo in HD

[@annamakesandmends]

Almost had a breakdown trying to read through the manual on my own after reviewing a dremel as a gift, this video made my life so much easier! Thank you!

[@CelticDreamsCoUk]

Glad it helped! Dave

[@MichelleSilva-eu3wc]

LMFFAAOOO LITERALLY !!

[@darkcloud13]

Omg same here! 😂 I opened the manual and was mildly reminded of some Swedish furniture brand... 🥲

[@Ty-tie_FTW]

Me too!!

[@Ty-tie_FTW]

Dude I read the instructions and watched like 4 videos and no one did any of what you made this video about. Just wanted to say thank you very much! So much help!!!

[@CelticDreamsCoUk]

Thanks. Glad you found it useful. Thanks for watching. Dave

[@melissajordan75]

This video should be included with every Dremel purchase. Fantastic!

[@CelticDreamsCoUk]

Thanks. Dave.

[@filipaperestrello8609]

Thank you so much. Awsome video!!

[@persesrathert8324]

Definitely!

[@LuisRodriguez-mp8zh]

AND A NAIL CUTER XD 😅😅😅

[@dkkeeto]

As a first time Dremel user I found this a lot better than reading a manual, thanks Dave

[@CelticDreamsCoUk]

+david keightley Thanks, the manual isn't very helpful. Hence the video. Dave.

[@e.e.7114]

I have had my Dremel Trio for about three years and despite needing various tools to do projects around the house, this tool was passed by so many times because I wasn't sure how to use it or all that it was capable of until now. Your video has been an inspiration. Thank you for helping me find confidence in picking this up and experimenting with it.

[@CelticDreamsCoUk]

+E. E. (Liz) ....Thanks Liz, what a lovely thing to say. But I do understand, power tools can be intimidating. Especially an unusual thing like this. But once you understand what it can do, then you're away! Thanks for watching and for taking the time to leave such a lovely comment. Dave : )

[@thewoodster8607]

Massive thanks to you for taking the time and effort to film, edit and post such a very useful guide to how to use these tools.

[@CelticDreamsCoUk]

Thanks for watching. Dave

[@lukescovell8294]

oh my god this is the best review on the internet I could not figure anything out from that stupid manual

[@CelticDreamsCoUk]

+Luke Tube . Thanks Luke. over 85,000 can't be wrong. Thanks for the lovely comment. Dave.

[@lukescovell8294]

Celtic Dreams np mate

[@myglaren]

+Luke Tube I bought one a few weeks ago and just opened it. Have to say the manual is worthless, first thing I did was look here. The tools wouldn't fit the collet as it was mashed into the retainer. Seeing the video it made sense to press it out and drop it into the Dremmel. I do have a "Prinz" knockoff but it is a feeble little thing compared to the Dremmel. Excellent "Get-You-Started" tutorial, thanks Dave

[@JTrillo]

+myglaren I had the exact same problem! This video helped me out a lot.

[@meszarosben]

+myglaren same to me

[@MAMAlbertaGirl]

You have done an exceptional job of explaining and giving close up images so the viewer can actually see how to use this tool! I searched everywhere for a good explanation and your video has been the best! Thank you so much!

[@CelticDreamsCoUk]

Glad it was helpful! Dave

[@marilynpaul1116]

After reading instructions several times over, I felt like I made a mistake purchasing this tool. I was lost. Your video saved me. Clear and precise visualization of how to use this dremel. Thank you.

[@CelticDreamsCoUk]

Thank you. Glad it helped. See also the video (below) on the cordless Dremel for some info on a few of the other bits. Dave kzbin.info/www/bejne/aIDVYZmHprqgfLs

[@kenhawkins2678]

I bought the Dremel and the instruction book was one step better than useless. This tutorial was absolutely spot-on. Thank you Dave

[@CelticDreamsCoUk]

Thanks Ken, glad it helped you out. Thanks for taking the time to comment. Dave.

[@raycarter4030]

I got the 3000 kit as a christmas present about 4 years ago, looked at it, decided quite quickly that it actually was rocket science, and put it in the cupboard to gather dust. Then today, the little gremlin on the shoulder said, the dremel would be ideal for that, snide gremlin, i knew he was right. Go it out, heart sinking, chest anxiety rising. Then I watched your brilliant video, and the rest is history. Thanks so much.

[@CelticDreamsCoUk]

Great to hear. I think many people have done the same. It's actually a great tool - once you understand what to do with it. Thanks, Dave

[@mehblehheh]

If dremel don't send you every model to check out they are missing a trick. This was so useful!

[@CelticDreamsCoUk]

+DC ..Thank you. Due to the huge success of this video, I have contacted them, but no response. Thanks for watching and for taking the time to comment. Dave.

[@lbhtrue13]

I just want to say a HUGE THANK YOU, I received my dremel today with polishing kit and was stumped, nearly threw it out the window tbh...then found your guide, thank you so much. The instructions are useless in the guide with the Dremel so you are a life saver :)

[@CelticDreamsCoUk]

Thanks for watching. I'm so pleased I helped you out. Don't forget the thumbs up. check out the other Dremel videos I've done.Dave.

[@lbhtrue13]

No worries there you are on my saved list for favourites and watch later lol x

[@frenchfry14595]

I bought my Dremel about six months ago, but it looked so complicated to use that I just let it sit there. I'm so glad I found this video. Now it's not so scary (I know I'm weird!). Have a nice day.

[@CelticDreamsCoUk]

Thanks. Glad to have helped. perhaps check out my video on the Dremel Cordless too, as I show how to use the Speed clic accessories. Dave

[@enforcementofficer4802]

I couldn't comprehend what on earth the manual was saying - this video was amazing and really appreciate you taking the time to do this. Manufacturers should be doing this too, instead of a random set of pictures!!! Thank you :)

[@CelticDreamsCoUk]

+manny gill .... Thank you for taking the time to leave such a lovely comment. Dave ; )

[@pennyjolly]

The manuel did nothing for me you literally explained everything I need to know thank you so much 😊

[@CelticDreamsCoUk]

You're very welcome. Thanks for watching. Dave

[@kairos6312]

same haha a video is much more helpful

[@acrylicavenue6056]

Thank you so much for taking the time to review this work tool. I was completely lost with the lack of instructions in the box. Why they've scrimped on the workings of this great all-rounder are beyond me. Thanks

[@CelticDreamsCoUk]

You're welcome! Dave

[@obrienqwerty]

What an absolutely great turorial, better by far than the book. Thank you for taking the trouble to produce such a professional and helpful piece of film.

[@CelticDreamsCoUk]

Thank you for the kind words. Glad to have helped. Dave

[@briandunning2974]

Dave, I just want to repeat what everyone else is saying. I was getting nowhere until I found your video. Brilliant. Clear. Succinct. Excellent. Thank you for taking the trouble. Brian.

[@CelticDreamsCoUk]

Thank you for taking the trouble to comment. It's appreciated. Check out my other Dremel videos. Best wishes. Dave

[@JunnBryanTrongcoso]

Thank you for putting up a review that goes into detail and has actual video. A lot of the results from google search video section were image stills and music.

[@CelticDreamsCoUk]

+Junn Bryan Trongcoso . Thanks for watching. Dave

[@bettystryk2310]

I am so glad I found this - I retired and bought a dremel for my hobby but did not know where to start and what attachments did what so you explained everything - thanks so much, Dremel should pay you for this video big time!!!!

[@CelticDreamsCoUk]

Glad I could help! Dave

[@karenbooth400]

Thank you so much for taking the time to do this. I was about ready to send my Dremel back to the store because it came with no real instructions on how to put it together and use.

[@CelticDreamsCoUk]

+Karen Booth Thanks for the nice comments. Glad you found it useful. Dave.

[@janethuffman5280]

I just got a Dremell 3000 today. I feel more at ease using it after your demonstration. Thanks so much. Projects here we come!!!

[@CelticDreamsCoUk]

It can be overwhelming at first when you see all the bits. But hopefully it all makes sense now and you can start having some fun with it. Thanks for watching. Dave

[@TruthSurge]

8:14 oh...my ... gard... this is exactly what I need. I have to shorten some bridge screws in this guitar. This is way better than the grinding idea. Just cut right through them!

[@CelticDreamsCoUk]

Yes, just get one of the "cut off discs" great for cutting screws etc. Dave

[@poppierosepoppiestoys6127]

Can I thank you so much for teaching me all about this tool. I have had one of these for years now and never knew how using this, and never knew how important it was. Thank you again.

[@CelticDreamsCoUk]

Thanks for watching. Glad to have helped. Dave

[@bettyross5685]

Oh my goodness what a blessing you are! I now finally know how to put it together. Your instructions were easy to understand and you didn't " waffle" 😀. The company needs to commission you to demonstrate all the attachments it would be a win all round. Thanks Dave I was getting very discouraged and frustrated 😃

[@lbhtrue13]

Lol, just read this and the same I nearly threw it out the window in frustration, if you have never used anything like this before the instruction manual is useless x

[@CelticDreamsCoUk]

Thank you both. Glad to be of service. Dave ; )

[@animallovefest143]

Celtic Dreams Just got mine today! Recommended by a guy at Lowe's. I had never seen, or heard of them before (I can't believe it! ), and I told him that I was working on a popsicle stick house for my hamster, and needed something that I can saw into it, to avoid the pressures of using an exacto knife. He said, can I show you something cool, that I think will be perfect for you? I said, absolutely, appreciate it! He took me to the Dremel 3000 on sale from $69, to $49, and he too could've been a spokesman for Dremel lol You guys should be paid! He even told me to look at KZbin videos, and that I would be amazed on everything that I will be able to do! You guys have got me so excited about this darn thing, but out of the box the collet was stuck, but of course I didn't know that, and was afraid to turn and break something. But seeing your video showed me what I could take apart with no damage, and viola! Popped it out, stuck it back in, and bam! Just like that I have me a DREMEL 3000! Haha thanks so much!

[@geekgamespt7928]

I'm new to Dremels, but this thing has been great. kzbin.infoUgkxfPgcZ5_Cl0HDUKkMJAKde11YKQZVgMoR The variable speed is awesome and the cordless aspect makes it so easy to work with. I am constantly finding uses for it that make tasks easier. Recently I put in a new deadbolt on one of our doors. I knew I had to enlarge the hold where the deadbolt goes into the door frame. At first I thought I would have to get a big router and figure out how to use it for that, but then I rermembered we have the dremel. I was able to enlarge the hole almost as easy as if I was drawing with a pen. It's also great for grinding our dog's nails done and so many other household tasks.

[@CelticDreamsCoUk]

Good for small jobs defiantly. Dave

[@Hellnogizmo]

I thank you so much for taking your time to go over this product. I had a similar model years ago, and I just wanted to see someone physically show me again just how it functions without a bunch of issue behind just getting simple information. Thanks so much again!

[@CelticDreamsCoUk]

Thank you so much for the lovely comments. So glad you enjoyed it and found it helpfully. Kind regards. Dave.

[@philhuntismine]

Got one of these for Christmas and couldn't figure out anything from the Dremel manual - having watched your vid at least I can change the various collets and bits and start experimenting now - Thanks Dave

[@CelticDreamsCoUk]

+Philip Hunt . Great, get stuck in and play. it's a great tool. enjoy. Dave.

[@jcjana54]

Dave is the best reviewer I've ever heard! I couldn't understand the manual, but Dave is very good at explaining how to get started with this tool. Thanks!

[@CelticDreamsCoUk]

Glad to help! Dave

[@Dizzycow-Tina]

BRILLIANT explanation and you made it so simple for me to understand ... I got mine a few days ago and found the booklet it came with worse than useless .... I am so pleased I found your video as you also explained all the bits that came with which has been a HUGE help .... I bought extra drill bits when I got my Dremel but didn't realise I needed other stuff to use them with so once again thank you for such a great video and explanation ..... Tina

[@CelticDreamsCoUk]

Thank you very much for the lovely comments. I'm glad you enjoyed the video and found it useful. Because this video is so long, I also uploaded an edited 5 minute version. SO its great to know that you found the extra information in this extended one useful. Thanks for watching! Dave Celticdreams.co.uk

[@Dizzycow-Tina]

Celtic Dreams I haven't watched the shorter version but I am so so pleased I found this one as I needed to know what all the bits did and didn't do ... like the little metal pole with a screw on the top .... That just confused me no end ... so when you showed how to use it with the cutting disc I was thrilled ..... I would recommend anyone who has never had a Dremel to watch this video it covers nearly everything and you explain it so well ... many thanks once again ... Tina

[@tbb_jaeger]

Even 7 years later this was very helpful. Thank you so much!

[@CelticDreamsCoUk]

Glad it helped! The models change a little but the basic operation and the tools are the same. Dave

[@colutuber]

Fantastic job Dave, the wife wants one for her jewellery making. She was a bit daunted by it but now we both want one. Great explanation, Dremel should be dropping you some cash

[@CelticDreamsCoUk]

Thanks. Glad it helped. See also the cordless one Dave. kzbin.info/www/bejne/aIDVYZmHprqgfLs

[@ChrystineHolcomb]

GREAT BIG THUMBS UP!!! I bought the Dremel 3000 with absolutely no idea what everything was or how it works. I just knew I wanted it. Then I was afraid to take it out of the box and use it! Now I know what it's all for and I can't wait to start playing with it! Diolch!!

[@CelticDreamsCoUk]

You are welcome! Dave

[@breckylavigne8505]

I was about to return my dremel 3000 w/flex shaft, I couldn't understand the instruction manual. I came across your video and BAMM, it was clear! You explained the who, what, where, and how in layman terms, which I greatly appreciate. Dremel Corp., I defiantly believe you owe Dave a BIG, Thank you and MORE!! Thanks to you Dave, I won't be returning the my Dremel.

[@CelticDreamsCoUk]

Thanks for showing your appreciation. Glad it helped you out. Dremel did get in touch and offered to "lend" me a Dremel for a few days to do a video on (which they then wanted back). ?? Thanks for watching. Dave

[@TimsModelTrains]

Great quality video amazing quality edits and explination, a link should come with every dremel 3000 to this video

[@CelticDreamsCoUk]

+CyrodilicMonkey Thank you for your kind words. Dave.

[@jenniferwallace5766]

Excellent introduction to the Dremel 3000. As other reviewers have implied, the manual is inadequate but this video shows you just how it all works.

[@CelticDreamsCoUk]

Thanks, glad you got something from it. Thanks for taking the time to comment. Dave.

[@shahm2300]

OMG...Thanks so much. Very very very helpful...I was sooooo lost when I first got it and did not know which attaches to what!

[@CelticDreamsCoUk]

S Hahm Thank you. Glad I was able to help. Dave.

[@HeatherFireStick]

Absolutely brilliant explanation of how to use this brilliant bit of kit. I was clueless when looking through the instructions. Your little video has cleared up all my questions. Thank you so very much.

[@CelticDreamsCoUk]

Glad it was helpful! Dave

[@hmann2727]

This is a brilliant informative demo Dave that tells you exactly what you need to know without needless waffle. Highly recommended thank you, can't wait to get started with my dremmel, have you any videos/techniques on drilling with diamond tips?

[@CelticDreamsCoUk]

Thanks. I don't' have any specific videos on using diamond tips. But here are a few things I've discovered in my own drilling and engraving. The diamond covered burrs aren't as tough as you'd like them to be. The diamond particles are bonded to the burr and will eventually wear off. So tip one, is gently does it. Too much pressure will just strip the particles and leave you with a bare metal burr. work slowly and let the tool do the work. Typically you will be working with hard materials such as rock, minerals and glass. hence its important to keep the material damp, with a sponge or cloth. I now many glass engravers do this under running water, but i cant endorse using a plug in power tool under running water. Obviously if engraving glass it vital to dampen the dust as you don't want to inhale it. A damp sponge also helps to keep the drill cool. A diamond bit cuts with an abrasive grinding action rather than a sharp cutting action, so they do generate heat. Hope all this helps. Dave.

[@pelissey]

This was such a good explanation of how to use this Dremel. I bought one this morning to work on my van and had no idea how to attach the little tools. Thank you so much for the information. It was great to see the close ups of the different attachments. Thank you!

[@CelticDreamsCoUk]

Glad it helped. Check out my video on the lutlichuck too. definatley a must have upgrade for a few pounds. Dave kzbin.info/www/bejne/fJTPdJ1tm9p9bJY

[@monkeydjinn]

Thank you Dave. The manual is useless so this is a very informative and accessible video review/guide.

[@CelticDreamsCoUk]

+James Dyche Thanks for watching and for your kind comments. Dave.

[@Silphwave]

Top guy, this vid is still helping people out many years later 🙌

[@CelticDreamsCoUk]

Thanks. Dave

[@christinanichols8585]

Thanks so much for the intro. I was struggling a bit with how to add the accessories, but your video helped with that!

[@CelticDreamsCoUk]

+Christina Nichols ...You're welcome. Glad it helped. Dave.

[@beatnazty5924]

hands down most useful review of this tool i've found after looking for an hour... I was a bit unsure about whether I was attaching the bits correctly and didn't even want to power it on until I was sure I knew what I was doing first. After watching this, i'm ready to start. Thanks for this!

[@CelticDreamsCoUk]

Thanks for watching. Do check out the video on a "stuck chuck" too you may find some useful information there. Dave kzbin.info/www/bejne/fJTPdJ1tm9p9bJY

[@LibraOnAmission7]

Brilliant video Dave, very well presented, gave me as much detail as I needed to decide to invest in a Dremel, as a beginner then the 3000 sounds perfect.. Thanks again chap, have subscribed!

[@CelticDreamsCoUk]

Glad you enjoyed it. Dave

[@wsomarks]

Kudos, Dave; this is the best first guide for a novice Dreml user I've eever seen. The manual that comes with the Dreml is great AFTER you understand the basics, but your video covered those basics in an easy-to-understand way.

[@CelticDreamsCoUk]

Glad it was helpful! Dave

[@einarhagby3227]

Thank you sooo much!! I bought a dremel Tool yesterday and you helped me get started!!

[@CelticDreamsCoUk]

+john hagby Thanks for the lovely comment. And thanks for watching. Dave.

[@myiphone2009]

Thanks! I'm suddenly seeing my Dremel in a new light! I could not figure out the Dremel "manual" until I found this video. Very grateful

[@CelticDreamsCoUk]

You're welcome.Dave

[@emailtonyob]

Great review. Thanks for posting. I didn't know how to change the bits until now, thanks.

[@CelticDreamsCoUk]

Tony O'Brien Thanks Tony. Glad it helped. : )

[@eca05jrc]

The instructions that came with the Dremel tool were woefully inadequate - this video is a perfect introduction & set -up demo - Recommend it to all first-time users. Nice one Dave.

[@CelticDreamsCoUk]

Thank you very much for the lovely comments. Dave.

[@TruthSurge]

I didn't know I could get "sper perts" for it! hahah great tutorial, I absolutely benefited from this having bought my first Dremel tool and I had no idea how to insert them into the end or what the little bits were really for. I wonder if there is a hard list of each one in the instruction manual and what they can handle. I mean, if I want to grind hardened steel, is there one in there or would I buy one not in the kit that is made for that? anyway..... very clear video!!!

[@CelticDreamsCoUk]

Demel's website is organised into the different materials or the different activities, so you can search for all grinding accessories, or or all accessories for wood. see the link. Dave www.dremeleurope.com/gb/en/products/accessories/?start=0&System=Multi-Tool+System

[@kimberlybrehm9467]

I heard him say that too! Made me smile.....

[@mindstray3791]

Wow! I just bought this and after reading the included instructions, I still couldn't figure out how to get the pieces into the mouth of the tool. Your video helped me a lot! Thanks for showing me how to insert the pieces, hold the tool, and what all the little accessories are about. Much appreciated!!!

[@CelticDreamsCoUk]

Glad it helped. Thanks for watching. Dave.

[@Melodic_Analysis]

very informative to someone new to the tool, thanks for sharing

[@CelticDreamsCoUk]

+Jeff Butwin You're very welcome. Dave

[@annafromathens]

Thank you so much for this. The instructions that came with the dremel were useless. Lots about safety, zero about how to hook up each accessory included... Thanks again!! Very useful video!

[@CelticDreamsCoUk]

You're welcome Thanks for watching. Dave

[@MrGavinheng]

Thank you for the video! The manual was absolutely rubbish, your video was really helpful !

[@CelticDreamsCoUk]

Thanks Gavin. Glad you found it useful. Kind regards. Dave

[@dcmitchell6893]

Dave, this is one of the best introductory videos I’ve seen great job

[@CelticDreamsCoUk]

Glad it was helpful! Dave

[@EdDiazKeys]

Great video!!! Thank you for your knowledge!!!

[@CelticDreamsCoUk]

You're welcome. Thanks for taking the time to comment. Dave.

[@joycebuchanan8439]

I watched several videos about the Dremel, but yours was the only one that showed me exactly what I was looking for. How to attach the cutting tool. I almost threw it in the trash. Good thing I found you. Thanks for making it so easy to understand. Joyce B.

[@CelticDreamsCoUk]

Thanks Joyce. You echo many others. Thanks for watching. Don't forget to give a thumbs up and subscribe. Dave

[@gwarlow]

Thanks for this demonstration! Have a great one!

[@CelticDreamsCoUk]

You're welcome. hope you found it useful. Dave.

[@TheJames1201]

Thank you for the step by step demo. Close ups also help. Explanations are clear and precise.You just helped me decide which rosary tool to purchase. Best review.Thank you

[@CelticDreamsCoUk]

+Monina Naylor Thanks for the lovely comments. So pleased it helped you out. I presume you mean "Rotary" tool. Although that said, there are actually "rosary" tools too, for stringing beads and making Catholic rosary beads...... I need to get out more. ! ; ) Dave

[@DaveDoingDaveThings]

many thanks for this vid. I just got my first Dremel today and the this vid is is extremely helpful

[@CelticDreamsCoUk]

Thanks, the printed instructions are useless. Thanks for watching. Dave.

[@xyrenegade]

He's Dave as well XD

[@cmoore9096]

I am so excited to try my Dremel after watching this video. The manual was so complicated. Thanks Dave.

[@CelticDreamsCoUk]

Glad to help. Dave

[@cyberbunnyclubwear]

Very helpful vid thank you. The instructions that came with it are possibly the worst instructions i've ever seen so this really helped!

[@CelticDreamsCoUk]

Thanks. Dave.

[@mareseryan7394]

One of the best tutorial videos ever, probably.

[@CelticDreamsCoUk]

Thanks for watching. Dave

[@fredkoch100]

By far the best review I have ever seen since I just bought a device. But, the thumb finger nails are too long and thus distracting. A gret review , thanks

[@CelticDreamsCoUk]

Thanks for watching. Fair point about the nails, - not as offensive as some other comments I have received. See also my review of the cordless....kzbin.info/www/bejne/aIDVYZmHprqgfLs Dave

[@XRanger30X]

Aye, to each their own. I am grateful for the time he took. Perhaps he is a guitar picker or just likes long nails. Thanks again Dave! Praise God brother.

[@QNZ4EVA]

Dremel should be paying you!!! The instructions in the box were useless. I am glad I found you because we were going to take this back to Home Depot. You have a new subscriber!

[@CelticDreamsCoUk]

Glad I could help! Dave

[@angiequinby8823]

Thank you! This was incredibly helpful in getting started!

[@CelticDreamsCoUk]

+Angie Quinby you're welcome. Dave.

[@LukeKamely]

Just bought a Dremel 3000 and had zero idea what I was looking at in the manual. Thanks, man!

[@CelticDreamsCoUk]

Glad I could help! Dave

[@billturner2613]

A first class introduction to the dremel 3000.

[@CelticDreamsCoUk]

Thank you for the lovely comment. Dave.

[@wildhearted_son8649]

The best demo ever.... deciphers the manual with ease

[@CelticDreamsCoUk]

Thank you. Dave

[@Witheredgoogie]

You have took the time and effort and made a great video - thanks, the manual is bonfire fodder.I was tempted by the in store clone rotary drill, it was half the price and had loads of accessories.. but garbage in =garbage out and if I was going to be serious about what I wanted to do, it had to be a Dremel.

[@CelticDreamsCoUk]

Thanks for the comments. Hopefully the video helped you get started. Dave

[@janicec9242]

Thankyou Dave! I couldn’t make head nor tail of the instruction manual!!! I am so glad I bought the Dremel...your enthusiasm about it is so encouraging. I can’t wait to get started xx

[@CelticDreamsCoUk]

Thank you. Perhaps check out my other Dremel videos, particularly the multi chuck. It really does make life much simpler. Dave kzbin.info/www/bejne/fJTPdJ1tm9p9bJY

[@janicec9242]

Celtic Dreams I certainly will. Thanks again😉👍

[@QuickyBabyTV]

Great video, thanks :)

[@CelticDreamsCoUk]

Welcome. Dave.

[@caragreene6029]

I just bought my first Dremel 3000 and your video has taught me so much. Thank you

[@CelticDreamsCoUk]

You're welcome. glad it helped. Dave

[@6string697]

Love that tool but I really want a thumbnail like yours for my guitar playing.

[@CelticDreamsCoUk]

Thank you. I have received a "lot" of negative and many downright abusive comments about my nails in this video. So it's nice to hear a more polite one. Thank you. Dave

[@70didis]

That same nail also caught my eye!..hehe..

[@70didis]

Jealous of it..made others jealous too, I guess...(jealous is not the right word though..) I admire a man who also takes care of 'himself'..respects himself..

[@philipknagg4017]

Thank you Dave. I spent a couple of frustrating hours reading the manual and puzzling over the box of bits that came with it. Your vid clarified it perfectly. Reassuring and pleasant to hear a northerner too.

[@CelticDreamsCoUk]

You're welcome! Dave ; )

[@KD-cg9iq]

I bet there's even an accessory available from Dremel to trim fingernails with 😄😃

[@CelticDreamsCoUk]

Yes, the sanding drums. Slow speed to avoid heat. Dave

[@talrune]

Nice

[@DaleTV69]

@@CelticDreamsCoUk Not to be rude, but I think they were suggesting you try the nail "trimming" accessory out.

[@gunstaone3323]

LOL

[@aidenv89]

There’s one for pets

[@williamsholden6429]

Thank you, I've never used a Dremel, had difficulty finding someone who actually explained the purpose for each part as well as how to install each part. Your details are Excellent! I purchased the 4000 but your instructions helped me figure things out. THANKS!!!!

[@CelticDreamsCoUk]

Thanks. Perhaps worth watching my other video too. kzbin.info/www/bejne/aIDVYZmHprqgfLs Dave

[@Billkwando]

You're a charming, nice sounding fellow who makes great video, but maybe considering trimming your nails before you make a video? *shudders*

[@CelticDreamsCoUk]

Point taken. Thank's for watching, hope you found it useful. Dave.

[@BurningtunaDC]

@@CelticDreamsCoUk I was going to ask if you could use the Dremel to trim one's finger nails. Indeed a nice sounding fellow who would sound a lot better with a decent mic. All in all nice video. Thanks for shooting and sharing.

[@DeadLikeTick]

Thanks for showing in detail the best way to attach the different parts, and the proper names for each of the parts. This was VERY helpful!

[@CelticDreamsCoUk]

You're very welcome! Thanks for watching. Dave

[@CelticDreamsCoUk]

The Dremel 3000 kit was supplied by www.eternaltools.com check them out and tell them I sent you. www.eternaltools.com/search/products?query=dremel Dave Wilson.

[@CelticDreamsCoUk]

..

[@subascosauce8288]

this was an amazing tutorial!!! i just got my first Dremel for my birthday and i’ve been scared of it! so thank you for taking the time for this, it’s not scary at all for me now. ❤

[@CelticDreamsCoUk]

You're so welcome! Thanks. Dave

[@nathandively8524]

I just got this Dremel today, first one. Thank you for the easy explanations. I'm excited to use mine.

[@CelticDreamsCoUk]

Hope you enjoy it! Dave

[@alistairwalker1387]

Super video as an introduction to Dremel. I'm using it to refurbish some old golf clubs, regrinding grooves, removing chip marks, blurring and polishing. Looks like the perfect tool. Thanks for the advice Dave.

[@CelticDreamsCoUk]

Thanks for watching. Dave

[@ninzo13]

Absolutely astounding amount of detail. You're a legend!

[@CelticDreamsCoUk]

Thanks, I hope you found it useful and informative. Thanks for watching. Dave

[@lully381]

Thanks for that. I have just bought a Dremel 7700 it came with just a basic booklet that really only centred on the safety and not what all the bits did. I am a complete novice and I had no idea how to use it. Thanks to you I now know what I am doing!

[@CelticDreamsCoUk]

+lully381 Thanks for the comments, that's why I did it. The manuals are pretty useless. So much easier to see someone using it and showing you what the bits are. Thanks for watching. : ) Dave.

[@Tim_Barnes_Guitar_Lessons]

My Son bought me one for Christmas, this video is very useful to get me up and running. Thanks!

[@CelticDreamsCoUk]

Thanks. Check out my other Dremel videos too for a few more accessories and tips. Thanks for watching. Dave kzbin.info/www/bejne/aIDVYZmHprqgfLs kzbin.info/www/bejne/fJTPdJ1tm9p9bJY

[@melleartz]

A super helpful video Dave which I've rewatched after a few months of not using my dremel. Thanks.

[@CelticDreamsCoUk]

Glad it helped. Dave

[@susanrowell7838]

This video was great to show me how to get my introductory bits onto the Dremel shaft. The manual left me scratching my head. Thanks so much.

[@CelticDreamsCoUk]

You're welcome. Check out my cordless video too, (below) with a few more accessories. Dave kzbin.info/www/bejne/aIDVYZmHprqgfLs

[@ianbarnes1406]

8.45 -just what I needed. Bought the 3000 today and had no idea how to fit the cutting disc so thanks for saving my life!!!!👍👍👍

[@CelticDreamsCoUk]

No worries, thanks for watching. Check out my video on the cordless model too, as I show the speedclick accessories. kzbin.info/www/bejne/aIDVYZmHprqgfLs Dave.

[@chasmit2010]

Brilliant Dave! It’s late 2021 and I just purchased the cordless model. Your video is STILL very helpful. Thanks from Florida, US.

[@CelticDreamsCoUk]

Glad it helped. Dave

[@garethjagger4441]

Thanks so much for this video. I bought the Dremel 3000 for the specific purpose of shaping, polishing pebbles. The instructions or lack of them drove me nuts. This video really helped to get me up and working the tool.

[@CelticDreamsCoUk]

Fantastic! Glad I could help .Dave

[@daryl0524]

Ditto for Mr. Diaz! Excellent presentation for a tool that lacks any substantially realistic, just common sense directions within the box. Best wishes to you and for your business.

[@CelticDreamsCoUk]

Thank you. Dave

[@loginregional]

Perfect tutorial! I just got my 3000 2/28 with the nice hard case. I've never even touched one before and I look forward to using this one for a lot of little things pending around the house. I haven't turned it on yet! Reading up on it. I can't emphasize more the need for safety gear. This kit came with the cutting accessory and the grinding accessory. The 2/28 designation is for those two accessories and 28 extras, like the 561, the 402, three different grades of sanding tubes, some rouge, the wrench and various pink and diamond grit sanders, engraving mandrels. Wow. Tomorrow I'm going to attack the plastic derailleur cable guide below the bottom bracket on the bicycle so I can get the mid-motor installed. Thanks Dave.

[@CelticDreamsCoUk]

Yes good point on safety. a cutting disc revolving at thousands of rpm, can be a hazard if used incorrectly. and you always get bits flying off so safety glasses are essential. Dave

[@valhadfield6563]

Hi Dave, my husband got me this for Christmas, I'm chuffed to bits. Your video has been a great help, thanks. Blessings

[@CelticDreamsCoUk]

Thanks. Hopefully my video is much better than the printed instructions. Glad you found it useful. Dave.

[@kylecrotty1417]

I almost gave up until I found your video... I thought I needed one of those ez lock attachments for the cutting wheel. Many thanks for the solid review!

[@CelticDreamsCoUk]

You're welcome. You may also find the other review useful too..see link . Dave. kzbin.info/www/bejne/aIDVYZmHprqgfLs

[@thistooshallpass5425]

Thanks for this - mines just arrived and boy was I struggling to figure things out - your video made a huge difference and now I’m excited to get going with the machine.

[@CelticDreamsCoUk]

Glad it helped. Thanks for watching. Dave

[@bleubill99]

Thanks for this clear introduction to a tool that I have heard about but never had in my hand before today

[@CelticDreamsCoUk]

Thanks for watching, I hope it helped clarify a few points. Dave.

[@cjolley2336]

Great tutorial! I was on the fence about this and another model. Stopping by to pick it up after work. Update: started using this for a couple of weeks now. I absolutely love it! Got the flex shaft attachment too. Using it to carve wood for wedding centerpieces 🪵 super easy Endless uses. Going to use it to craft things for my Christmas village as well

[@CelticDreamsCoUk]

Glad I could help! Dave