Dremel 4000 With Flexible Shaft - Tools & Accessories TEST - Rotary Multi Tool Kit Unboxing & Review

Rotary multi tool kit Dremel 4000 series kit 1/45 unboxing and review.
This kit includes the high performance 4000 Multi-Tool, with innovative features like the EZ Twist nose cap, electronic feedback, collet lock out function and an RPM range of 5.000 to 35.000. Additionally the kit includes the Flexshaft attachment, which is the ideal attachment for detailed work on hard to reach places. Next to the Flex Shaft attachment the kit includes 45 original Dremel accessories including EZ SpeedClic.
► Amazon shop - amzn.to/41yHdAt
Watch Next ➡ DeWalt Drill - • DeWalt Drill DCD790 M2...
🔔 Subscribe for more videos: www.youtube.co...
Other videos I recommend you check out:
🔋 Power Bank - • Romoss Power Bank - Se...
⭐ Parkside Hot Glue Gun - • Parkside Hot Glue Gun ...
🌡 Laser Thermometer - • Surface Infrared Therm...
🔥 Most Powerful Torch Lighter - • Most Powerful Torch Li...
✅ Like and comment!
✅ Follow Me On IG ► / aliwall.team
✅ Follow Me On FB ► / aliwallvideos
DISCLAIMER: This description contains affiliate link, which means that if you click on the product link I'll earn a small commission if you make a purchase. This help support the channel and allow me to continue to make videos like this. Thank you for the support!

[@AviusL]

Great video showing off all the attachments! Thanks! :)

[@AliWall]

Thanks!

[@jeannineslack9992]

I'm new to Dremels, but this thing has been great. kzbin.infoUgkxfPgcZ5_Cl0HDUKkMJAKde11YKQZVgMoR The variable speed is awesome and the cordless aspect makes it so easy to work with. I am constantly finding uses for it that make tasks easier. Recently I put in a new deadbolt on one of our doors. I knew I had to enlarge the hold where the deadbolt goes into the door frame. At first I thought I would have to get a big router and figure out how to use it for that, but then I rermembered we have the dremel. I was able to enlarge the hole almost as easy as if I was drawing with a pen. It's also great for grinding our dog's nails done and so many other household tasks.

[@EdwardJKeuer]

I learned I can really screw up a job with that carving tool! 😊

[@AliWall]

Before starting work, you need to practice. 👍

[@dantebenavidez904]

Ola yo compre un monitor de esta marca en 6meses tube que llevar a que lo arreglen tres veces y se terminó la garantía nunca más lo pude husar me avisaron que vino mal de fabrica nada más nadie me ayudo lo pague caro yo hago tallado en vidrio y me ver si alguien sabe adonde llevar el tornito

[@colinbrown4719]

Speedclic cutter , grinding , sanding and polishing wheels are the best , beat the silly little screw in end of the shaft .

[@ericwilliams538]

The wrench/tool provided with the Dremel is for tightening up the the Chuck. Not the top piece you were using. Also, you have to use the polishing compound that's provided with the polishing bits or you can "burn" them up.

[@AliWall]

Thanks for the suggestions. 👍

[@Bollalillo]

By top bit you mean the plastic cap? If so it is for tightening aswell as the tool provided, its literally markeded with that in mind

[@sherrindo]

Thank you for the great video! It’s very clear! Can I use the metal cutter to cut small pieces of wood? Or make cuts in small wooden pieces?

[@AliWall]

Thanks! Yes you can, just test it and you will know if it works the way you want.

[@luciaacheampong4221]

Hello, can it cut ceramic?

[@pequodexpress]

What is the maximum post-diameter that can be chucked in both the large housing and the precision flex-shaft housing?

[@AliWall]

For both are the same. It is intended for 3mm, but maybe you can put 3.2-3.4, I can't guarantee it, because I don't have anything to try it with.

[@TheNoisePolluter]

Either 3mm or 1/8" (3.2mm) shafts

[@niallchurch2679]

To change the brushes you have yo open the case!

[@thecatpersonuk9962]

I think the drill bits would be easier with a Dremel workstation same goes for other things

[@AliWall]

Yeah, would like to get it. Will add to my "must to buy" list. 👍

[@weatherwizard7637]

How much time we can run the motor?

[@AliWall]

I can't find any information in the manual on how long it can be operated. But when it's get hot it is better to take a break.

[@weatherwizard7637]

@@AliWall ok . This will cut through coconut shell easily right?

[@AliWall]

With the right tip there should be no problem.

[@Healing556]

Whats the prize now ?

[@AliWall]

About 110eur.

[@loramilkova4476]

can't do without annoying music....

[@quagmirewasere]

Mine came is plastic solid case

[@AliWall]

I have seen those plastic cases, they are more practical. Probably it may vary from country to country.

[@quagmirewasere]

@@AliWall could do im in the uk ive not used it yet waiting till no kids about or they be chopping and sanding everything in the house 🤣🤣

[@sdqsdq6274]

most dremel 4000 is soft case, you got the right model ?

[@NoctisMotus]

@@sdqsdq6274 Every Dremel 4000 kit I've seen has a hard case. Well, until this one. :) So, yeah, almost certainly Nick knows what he has.

[@monteceitomoocher]

@@NoctisMotus just got mine, it came with a hard case and hard plastic wall mount holder, must vary between countries.

[@nosurname9652]

Looks like this model have too big vibrations on certain speed.

[@AliWall]

I haven't used other models, so I can't tell if others are better. But for small jobs can use flexible shaft.

[@manasdalei-br8tt]

Kese magay meriko chaihe

[@xddark6269]

بيجي من فين بمصر

[@islamkamel496]

وكلاء شركة بوش الألمانيه في ش الجمهوريه .. هناك في مول إسمه البرنس هتلاقي فيه كذا محل

[@FahimibnDawud]

I wish this didnt have that annoying ass music! It makes it so hard to watch.

[@AliWall]

At least the pain is over because you've already watched the video. 😅

[@dane4890]

🤣 Great answer, but the music is really hard to listen to, but great video 🤣@@AliWall

[@mustazaragozad1785]

Slm tmna akhoya

[@javieralbertovicentemelend5789]

Pesima demostracion y nada practico . PUEDES HACER ESTOS TRABAJOS EN FORMA MANUAL Y MAS RAPIDO

[@Njmodelmaker]

ਅਬੇ ਚੂਤੀਏ ਬਾਡੀ ਕਿਉਂ ਖੋਲ ਰਿਹਾ ਹੈ ਬਾਰ ਬਾਰ