Driver Sleep Detection And Alarming System Using Raspberry-pi

[@sivaasapu7131]

Thank you soomuch sir. I got the output with Raspberry pi 4 model B board and Lenovd Full HD camera .. Thank you soomuch sir for your valuable support..

[@rahulIOT]

Great work

[@_kayos_]

hi can I make this using just Webcam, raspberry pi and a buzzer using the same code?

[@rgt2573]

Hey Siva bro, I am planning to do this project by myself.. need your help and support. How to contact u bro?

[@rahulIOT]

@@rgt2573 if you watch my complete video without skipping 1 second and just follow the steps those i mentioned then you can also design this project by yourself like shiv.

[@rahulIOT]

@@_kayos_ yes do not connect other components those you don't want .no need to change code.. project will work.

[@Max-vo6zo]

Which application you're using to run the project

[@rahulIOT]

Explained in video

[@jakesully-nt6xl]

Hi what can I do about this error Python error: OpenCV(4.5.1) \../modules/objdetect/src/cascadedetect.cpp:1689: error: (-215:Assertion failed) !empty() in function 'detectMultiScale'

[@thephoenix1450]

Hello sir Thanks for the project But i had a small doubt I have a readymade I2C which is directly connected to LCD. Should i use the pins present on top of the lcd like this video OR should i follow procedure of the SDA, SCL video? If i connect to SDA, SCL will the code change?

[@rahulIOT]

There is already a video on how to replace this LCD with an i2c lcd. Please check my playlist you will find video. Connect i2c lcd with raspberry. In that video i explained how to replace this LCD with i2c lcd.

[@thephoenix1450]

Ok sir thanks But the code remains same right?

[@parmeetkaur7538]

Hii, can you tell how you made connections of lcd

[@rahulIOT]

1. It's explained in video please watch complete video 2. There is also separate video 3. You can use i2c lcd also how to replace this LCD with i2c lcd. There is video. Please check my playlist

[@ManzurulHaqueMAHIN]

Sir, if I turn off the power after running the code and then connect the power again, do I have to manually run the code again? Or will it run automatically?

[@rahulIOT]

Yes you need to start again manually

[@meghananaidu711]

Sir, I have a doubt. Can we run the same with raspberry pi camera module?

[@rahulIOT]

@@meghananaidu711 I have already uploaded video with raspberry pi

[@meghananaidu711]

@rahulIOT I meant using a pi cam module instead of usb camera module.

[@rahulIOT]

@meghananaidu711 yes but you should change controller from Arduino to raspberry pi

[@harshalpaymode151]

sir i want to add collision detection using IR sensor in this project how can i do this

[@rahulIOT]

Please watch my IR sensor video and just add that sensor here. You just need to copy and paste that code here

[@harshalpaymode151]

@@rahulIOT thank you sir

[@fatimazahraamousse3765]

i just bought raspberry pi 4 and i wanna test this code ...I dint know how to connect Raspbeery with my PC first so that i can import the code ; Any help plz ?

[@rahulIOT]

First flash the os into your memory card . If you don't know how to flash os then watch my blind reader project. After that just connect the HDMI pin to your desktop. Connect the mobile charger to your raspberry pi.

[@udayjoshi1558]

Sir mayne same dekh k kiya hai or sab work bhi kar rha hai siway display k usme kuch likh k nhi aa rha hai just box box aaa rhe hai uska koi solution hai??

[@rahulIOT]

I think we already talked on WhatsApp

[@udayjoshi1558]

@@rahulIOT no sir iam new

[@udayjoshi1558]

@@rahulIOT plz reply sir i want to submit it by Tomorrow..

[@rahulIOT]

@@udayjoshi1558 ok first thing you need to check all pin connection. Second adjust your potentiometer. I have a separate detail for video on the lcd connection only please watch all your points solved

[@harikrishnakoyala5443]

Hi ...Can you tell me how it could be made as an IOT

[@rahulIOT]

@@harikrishnakoyala5443 i think we discussed on WhatsApp

[@KASINATH-fy2lj]

Which Algorithm you Used in this Sir?

[@rahulIOT]

Please watch the program explanation video.

[@Dn-jf7ep]

Can I use raspberry pi zero model for this project? Pl reply

[@rahulIOT]

Sorry i haven't worked on raspberry pi zero before.

[@Dn-jf7ep]

Thanks for reply...❤

[@muhammadsalem9924]

Can I use ESP32 instead of Raspberry Pi? Please answer

[@rahulIOT]

Sorry i haven't worked on esp before

[@youssefsherif32]

Will this work with raspberry pi 4

[@parmeetkaur7538]

Hi sir , i am not able to install dlib library on raspberry it is giving error. What can i do can you tell any solution

[@rahulIOT]

Try Raspberry pi 64bit recommended os .

[@parmeetkaur7538]

@@rahulIOTi'm using noobs os as said by you in video

[@rahulIOT]

@@parmeetkaur7538 Raspberry pi company has stop updating package on noobs os . That video is old and this time it works Noobs were supported at that time . But you can switch to the latest os.

[@kimo_channel]

Sir, this project is created using raspberry pi 3 or 4 . And if in 4 , is it gonna work on raspberry pi 3?

[@rahulIOT]

Yes it will work on all raspberry pi

[@rogueone1733]

Sir, can you please provide a model for automatic speed control in restricted zones(school zone, hospital zone etc) using raspberry pi and motor.(RFID)

[@rahulIOT]

I will try

[@tonyvarghese75]

How to autorun this program on raspberry pi

[@sushantkulkarni0317]

hello sir can we create this device whith just the arduino without rasberry pi

[@rahulIOT]

Already there is video on arduino without using raspberry pi. Please check my playlist you will find video

[@pratiknanavati9501]

Can we make this using pi Pico?

[@rahulIOT]

Sorry i haven't use pico before

[@kimo_channel]

Sir , please.how can I contact you . I need this project.I will pay you for it

[@rahulIOT]

This project is free..i dont not sell project.. everything available in video you have to just fallow process...code also given in description

[@rafinursandi5828]

code errror This environment is externally managed when i try to install pip3 install imutils

[@wiilz1239]

Can you create indonesian subtitle sir ?

[@rahulIOT]

Sorry i dont know how to create.

[@youssefsherif32]

I mean the code you have provided

[@rahulIOT]

Yes it will work on raspberry pi 4

[@jakesully-nt6xl]

​@@rahulIOT Hi Would it work on raspberry pi 3B?