Drone Facade Inspections | Complete Workflow | Hammer Missions

[@boldger13]

I am glad you showed that the settings in the Hammer Missions app can be adjusted while the drone is flying without having to land it to adjust. A real time and battery savings. If I choose Facade Inspection instead of Facade Mapping, does it still stitch a 3D image like the one shown in the video or will I need to also do a "Mapping" of the roof or "3D Mapping"of the roof to get the 3D stitching with combined Facade?

[@HammerMissions]

Are you trying to capture the roof + facade or just the facade? It's the roof + facade, we would recommend using our 'Mapping' or '3D Mapping' mission for the roof and our 'Facade Mapping' mission for the facade. Typically you will need a good oblique gimbal angle in both missions for them to stitch well!

[@MarkElliottMCIM]

Thanks Varun, very clear and useful to see used in the real world. A couple of Qs: (1) On desktop I can't see any options for MM2, MM3 Pro, MM4 Pro - or camera setting e.g. 48k resolution. Do I just select Mavic Mini (then manually set on drone RC?); (2) Can 48k be 'forced'? to maximise resolutions from the smaller drones?

[@HammerMissions]

Hi there! Thanks for your questions! 1) You'll be able to choose Mini 3 Pro camera from the Hub very soon! But yes, in the meantime, you can plan with the Mini camera and change on the Android device. 2) Do you mean 48 MP? You should typically be able to configure the camera settings in the Hammer App or DJI App and the mission will then take the images with the set camera settings