Yup! me too! Will make a video as soon as support becomes available!
@rubengarciajr75603 ай бұрын
@@InfinityDroneshow many mavic 3’s do you have
@InfinityDrones3 ай бұрын
@@rubengarciajr7560 I do get them from time to time :)
@_Kommissar_3 ай бұрын
@@InfinityDrones Well now that I know it works with Mavic 3 can I just the DJI goggles with this hack?, Update: I went to the website and it says you can only get FCC boost with Mavic 3 I am now sad| Update 2: I looked at the wrong drone it does actually work with the Mavic 3 I happy now :>
@InfinityDrones3 ай бұрын
@@_Kommissar_ awesome! Happy you're happy!
@Drone-Pilot6 ай бұрын
I have shown DJI all the proof and that I have been permitted and authorised to fly in some No Fly Zones legally, yet I still have to wait, show my details, licenses etc just to get them to permit the zone, sometimes it’s taken 2 days to get them to remove the block, I have installed on my other drones the drone-hacks mod and now finally I can do my Mavic 3 you have no idea how much of a relief this is . Brilliant work guys for some5hing that DJI should give us. I do like vision assist and have used it a few times here and there but I can live without it for the benefit of not having to ask them to allow me to fly legally.
@InfinityDrones6 ай бұрын
Thank you for letting me know. You are the perfect example of why I believe in the work Dronehacks and Co are doing. So happy that this helped you!
@PowderMill6 ай бұрын
Many public safety agencies are running into the same issues. We have several heavily wooded areas and multiple lakes in our response area that are frequent locations for search & rescue operations. They are marked as being within restricted areas on DJI’s maps -BUT- the entire area is verified as being free and clear of any restrictions, yet DJI seems to think it’s adjacent to an airport when the airport is physically over 20 miles away. Despite the program DJI launched a few years ago, where they issue a special license that removes all NFZ and other restrictions…. It is nearly impossible for our small volunteer fire department / rescue squad to obtain assistance from DJI. They seem to only have this available for the enterprise series drones. Due to the much lower cost for the Mavic-3, our limited budget organization has chosen these. So… Thank you! This seems like a perfect solution.
@InfinityDrones6 ай бұрын
@@PowderMill so happy this helps you! Thank you very much for your detailed comment. I hope others will read this and realize ithat removing nfz can really help a lot of people.
@Moai6666 ай бұрын
When will Mavic 3 pro be supported?
@InfinityDrones6 ай бұрын
We don't know, they are stil trying to crack the firmware.
@mf1695Ай бұрын
Mavic 3C is not yet availible?when will be support?
@InfinityDronesАй бұрын
Only the Mavic 3 - They trying to crack the firmware, but there is no date that can be given as they need to crack it first.
@mingscustoms7 ай бұрын
Just used this for my dji fpv. Works great rhank you for your tutorials
@InfinityDrones7 ай бұрын
Great to hear! The DJI FPV is probably theeeee drone that needs dronehacks ;)
@slimslamma36795 ай бұрын
did you downgrade from 01.04.0000 to 01.02.0000? not working for myself
@chriswaldron26175 ай бұрын
Also want to know how it’s all edged to work when even looking at this website it says it won’t work on firmware running .04?
@slimslamma36795 ай бұрын
@@chriswaldron2617 Roll back the firmware to.02 and then hack the drone.. Not working for me tho
@InfinityDrones5 ай бұрын
@@slimslamma3679 I think he didn't watch my dronehacks q1.35 video... There is specifically do exactly what what he wants.
@sakocat6 ай бұрын
Thank you for the video. Ive been waiting for his hack for a long time now. We had a bit of trouble but finally got it to work.
@InfinityDrones6 ай бұрын
Awesome! So happy to hear you got it working :) Fly it like you stole it!
@sakocat5 ай бұрын
@@InfinityDrones I just took it straight up to 1743 meters. so the hack is working
@InfinityDrones5 ай бұрын
@@sakocat Fantastic! Happy flying!
@sakocat5 ай бұрын
so somehow the dpi fly app got wiped off my phone. So now can I download it again. And if I do will it go to the latest firmware and delete the hack.
@InfinityDrones5 ай бұрын
@@sakocat no the app version has no effect. The drones firmware should not be updated at all.
@rubengarciajr7560Күн бұрын
34:05 I think there’s a huge issue with this counter while failsafe lose connection, RTH will not work and you could lose the drone. Since you live in a restricted area zone and you’re getting this counter, can you help test it? When there’s drone and RC connection, the counter just keeps resetting itself and starts over and it’s not an issue, just pretty annoying. However, the problem comes to play when a failsafe (lose connection) occurs and that counter is counting down. If you have the setting set to RTH at signal lost, does the drone fly back to its home point as it should, or what does it do?
@harveyspecter16532 ай бұрын
This is amazing! Thanks man. What is all this about people saying the Mavic 3 Pro having less reach and more unstable connection due to the controller having no antennas?
@InfinityDrones2 ай бұрын
The DJI RC has about 20% less range compared to the RC-N1
@skymakaiАй бұрын
I had issues getting the drivers to install using Windows 11 via Parallels. I had to use a native Windows booted computer. After hacking, I noticed that auto-landing when close to the ground is also turned off. Is there a guide or Wiki for setting parameters?
@InfinityDronesАй бұрын
Hi there. Did you use the cinemode option to disable the gps? Of so it's recommended that you flow close to the ground and switch back to Normal mode so the sensors get activated again
@skymakaiАй бұрын
@@InfinityDrones It’s in Normal mode.
@InfinityDronesАй бұрын
@@skymakai mmm, I would lot a ticket with Drone-Hacks support - I'm sure they'll be able to assist
@skymakaiАй бұрын
@@InfinityDrones Thanks, I did. They created a new help page indicating that Windows 11 ARM is not supported. It needs to be an Intel/AMD based Windows installation. As for disabling the ATTI/Cine mode, they're not helping with that which is very disappointing.
@InfinityDronesАй бұрын
@@skymakai Ah sorry to hear about that. Yeah heck I didn't even think abour windows running on ARM...
@stst83017 ай бұрын
Amazing! Thanks for all your videos!
@InfinityDrones7 ай бұрын
Glad you like them! Please let me know if you have any comments or want other videos
@saltire5466 ай бұрын
When I select my 1200 firmware it won't allow me to buy a licence, it says downgrade but In their site it says it's supported ?Ok got it sorted and everything seemed to go ok 👌
@InfinityDrones6 ай бұрын
hi there, you just need to buy a license. When you open the dronehacks you just need to follow the steps as it will auto link the license and then prompt you to download the downgrade firmware. Let me know if you get stuck. But you just need to buy a license (does not matter which firmware you select)
@flyaway44107 ай бұрын
Great Video ! Thanks for your work !
@InfinityDrones7 ай бұрын
Thank you very much. Really appreciate it
@DariousHarris-e4g3 күн бұрын
Where you located can i send you my dji inspire 2
@InfinityDrones3 күн бұрын
I'm in South Africa... Follow the video - the mod is really easy to do. My latest video for the Phantom 4 shows the exact same process you'll follow for your inspire.
@p00ks13Күн бұрын
Is this for dji mavic 3 pro?
@harrylode13 ай бұрын
Thanks for the video, Today I also hacked my mavic 3 and it works perfectly. Only my goggles 2 still shows 50 mbps. And at 1500 meters 20 to 30 mbps. is that normal? or how can I see that my goggels 2 now also works better
@InfinityDrones3 ай бұрын
The antenna and ocusync on the Mavic 3 is great. That means you'll get great range :) I've been out over 6km
@harrylode13 ай бұрын
@@InfinityDrones It's just a shame that C and S mode no longer work. But thanks for the video, it was educational👍
@InfinityDrones3 ай бұрын
@@harrylode1 The work for me (well C mode has been turned into Atti mode)
@LeoDrones5 ай бұрын
I did the HACK and for me it's horrible having to keep clicking every time the 90 second screen appears. but it is a solution. I prefer to use the license myself.
@InfinityDrones5 ай бұрын
I understand completely. Atm this is the onky way to get the nfz removal. You can still apply the normal way vI dji flysafe website for an unlocking licence
@LeoDrones5 ай бұрын
Anyway, congratulations on your efforts.@@InfinityDrones
@rubengarciajr75604 ай бұрын
A little annoying yeah but the pros of having a hacked bird definitely outweighs it
@DroneNigde14 күн бұрын
Hello bro, I have a mavic 3 pro. Does this software work with my device? I'm asking because there isn't exactly "mavic 3 pro" in birdmap. Thanks 🙏
@InfinityDrones12 күн бұрын
Only the Mavic 3 and Mavic 3 Cine are supported. The Classic and the Pro is sadly not yet.
@DroneNigde12 күн бұрын
@@InfinityDronesgot it. Is there any other software you can recommend? (for mavic3pro)
@InfinityDrones11 күн бұрын
@@DroneNigde the mavic 3 pro is not supported at all with removing nfz, altitude or enabling fcc... Sorry man.
@Nayzf450Ай бұрын
Good evening I cracked the drone using your software except that my computer no longer recognizes the drone nor the dh application the drone displays black camera on the DJI Fly application and the update is always at .1300 but I can write things on the drone name to modify
@InfinityDronesАй бұрын
Hi there, I would say try with the latest version of Dronehacks and make sure you have DJI assitant 2 for consumer drones and the dronehacks driver installed.
@user-qs7hz9se2w9 күн бұрын
I’m using a DJI FPV drone. I set the FCC mode and it‘s not a perfect open field, but I flew 2.6km round trip. Is the FCC mode a success?
@InfinityDrones9 күн бұрын
Range will always differ and depend on many factors. If you enabled fcc mode on dronehacks then yes its successful
@RandomSynr6 ай бұрын
something else is the height limit doesn't stop you from going over it... just FYI
@InfinityDrones6 ай бұрын
Hehe yeah, The hight limit will be ignored but the app will still display it. The mod is not perfect, but atleast we have something now.
@PARAIBADRONE4 ай бұрын
Olá preciso por gentileza calibrar sensores MAVIC 3 inferior, no assistente dji não aparece a opção calibrar, obrigado
@InfinityDrones4 ай бұрын
Really sorry to hear... that is a big issue that DJI has... they do not allow you to calibrate the sensors on any drone newer than the Mavic 3 (Mini 4 pro, Air 3 and all of the Mavic 3 series)... Sadly you'll need to send it in for repair.
@photocopter6 ай бұрын
Funciona perfectamente, muy bien explicado, un abrazo desde México!!!
@InfinityDrones6 ай бұрын
Thank you very much! I really appreciate your feedback! So happy this helped you! Hugs from South Africa!
@vulcanodrones4 ай бұрын
con mavic 3 ?
@photocopter4 ай бұрын
@@vulcanodrones es correcto mavic 3
@PowderMill3 ай бұрын
Forgot - Does the “Atti” mode get enabled with a switch flip to “C” instead of “N” or “S”? When flying the Mavic-3 with an RC-Pro, the “C” switch position now indicates “N” and it won’t go into “Atti”. Thanks!
@InfinityDrones3 ай бұрын
Hi there, that is weird. I would recommend contacting the Drone-hacks team via a ticket so that they can check for you.
@seimejotex6 күн бұрын
Hi, congratulations on the work you are doing, I would like to ask you a question, I have a mavic 3 Classic, drone firmware 01.00.06000 and the radio control firmware 01.03.1400, is it compatible with your software, I would be interested in having the flight mode in FCC. Thanks and congratulations again. Simone
@InfinityDrones5 күн бұрын
Sadly the Mavic 3 Classic is not supported. Only the Mavic 3 and Mavic 3 Cine is currently supported. But check out my latest dronehacks video since the new owners of Dronehacks have enabled fcc mode via the Dronehacks companion app for android.
@seimejotexКүн бұрын
@@InfinityDrones ok, thank's
@Nayzf4502 ай бұрын
Bonjours j’ai fais exactement comme toi sauf que le firmware du drone ne veux pas s’afficher en 1000 ou 1100 svp help me
@InfinityDrones2 ай бұрын
Does the dronehacks app not display the version or the dji fly app not display the version?
@Nayzf450Ай бұрын
@@InfinityDrones both show version 1300
@Nayzf450Ай бұрын
???
@InfinityDronesАй бұрын
@@Nayzf450 So you bought a license and you did downgrade to the lower firmware version? Just need to be sure that you drone is the Mavic 3 (not the Pro or the Classic)
@penne_best_noodles2 ай бұрын
it still transmits Drone ID
@InfinityDrones2 ай бұрын
Have you checked in with the Dronehacks guys? Log a ticket please
@penne_best_noodles2 ай бұрын
@@InfinityDrones I created a issue. It got closed a day after creation with no resolution.
@InfinityDronesАй бұрын
@@penne_best_noodles Try submitting a new ticket. They have new ownership as per my last video - much bigger team now.
@ricardomontalban1884Ай бұрын
Yes. Yes it does. Transmits everything.
@InfinityDronesАй бұрын
@@ricardomontalban1884 I hope they cna get this resolved soon then.
@mihaildorianАй бұрын
Be careful when you switch to "cine" mode, you will be in atti mode and risk losing your drone. I think that this feature should be optional like "drone id" and "air sense" also.
@InfinityDronesАй бұрын
I agree, I did mention it in the video. The user can always change the Atti parameter using the Dronehacks application.
@rubengarciajr7560Ай бұрын
Yes of course you don’t want to fly far and fail safe when u have the gnss off
@Barkas315 ай бұрын
Hello! Installed DH, everything is ok. Question about the remote control firmware, currently the remote control firmware is 03.01.0800, DJI Fly 1.6.6. Do I need to update my remote and app?
@InfinityDrones5 ай бұрын
you can update the remote and fly app if you want to, just do not update the drone's firmware :)
@evenway52645 ай бұрын
hi Thank you for this explanation. It worked exactly as you said, but the version has become 77.00.0502 not 01.00.1000
@InfinityDrones5 ай бұрын
The version number of the firmware is just changed so that you'll never be prompted for a firmware update again :) Enjoy!
@evenway52645 ай бұрын
last questions .. how to hack 4G cellular dongle to working in my country ??
@InfinityDrones5 ай бұрын
@@evenway5264Sadly, dji has blocked it outside mainland China...
@rubengarciajr75605 ай бұрын
@@evenway5264yeah I think the link has to go through some DJI servers, so they can block this 4G LTE feature
@PowderMill3 ай бұрын
At approximately 11:20 p, you indicate that if the drone (in our case - Mavic-3 and Air-2s) hits an NFZ on its way back to you, it “hits a wall”. In the discussion, you mentioned the India altitude restrictions . I’m a bit confused. Does the NFZ “wall” apply to drones in the USA? Our big fear is that one of our drone operators will fly into an NFZ and lose it if the drone cannot pass through again. Does anyone have any further info.? Thank you !
@InfinityDrones3 ай бұрын
The NFZ (No Fly Zones) you can check in your dji fly app's map. It applies to all around the world. In india they have an aditional law that prevents drones from going higher than 15m.
@Cobysales4 ай бұрын
I bought the .1000 for my Mavic 3 and I got all the way to the step of connecting the drone to the computer...the application couldn't detect my drone?? Waste of money for me. Would be great if I could get help with this so I didnt waste $50 :(
@InfinityDrones4 ай бұрын
Hi there, dis you follow all the steps? Do you have the Dronehacks driver installed and dji assistant 2 for consumer drones installed? Remember, dji assistant 2 for consumer drones must be closed otherwise dronehacks won't be able to detect it
@Zombieantie6 ай бұрын
Your videos are great, I have a question about Air 3, drone firmware is 01.00.1000 and RC is 01.00.0600, can the aeroscope see the remote controller location live and if so, is there a way to hack that?
@InfinityDrones6 ай бұрын
Hi there, the answer is yes. Currently the Air 3 is just too new... they will try and hack it but sadly its not hackable as of yet
@Zombieantie6 ай бұрын
@@InfinityDrones I read that controller (thus the operator) location is only seen if the phone has GPS on, I'm guessing that was wrong info 😕 I don't mind the drone live location and home point as much as operator live location, I'm from Georgia, borders Russia, I might be needing to use this with not so civilian purpose if Russia decides something, I very much need not to be tracked. Thank you for the reply, I'll keep an eye out for the latest hacks
@InfinityDrones6 ай бұрын
@@Zombieantie I'm assuming you have the air 3 with smart controller. Sadly, I recommend letting your air 3 go and get a mavic 3
@Zombieantie6 ай бұрын
@@InfinityDrones I have an RC-N2
@InfinityDrones6 ай бұрын
@@Zombieantie I see. Well at the moment the Mavic 3 is the best drone that can be unlocked
@Greek-Pilot7 ай бұрын
very good 👍
@InfinityDrones7 ай бұрын
Thank you 👍Hope this helps someone
@RandomSynr6 ай бұрын
I got it loaded but when i tried it out... I don't have sensors anymore... Landing is a bit weird as well. When I move to ATTI mode with cine position It shows a battery low warning.
@InfinityDrones6 ай бұрын
Yes, Check ou the dronehacks website (its in the video too) but there are things you can do to make coming out of Atti mode better. Check the section under NFZ: drone-hacks.com/m3-custom-fc
@RandomSynr6 ай бұрын
@@InfinityDrones I don't have any sensors not just in atti mode. I can fly directly at anything and it will not give the normal warning. The drone is in normal mode.
@InfinityDrones6 ай бұрын
@@RandomSynr that is very weird. I would recommend you update to official firmware and then do the mod again. Just to rule a few variables out. If you still have an issue please let me know.
@saltire5466 ай бұрын
I tried my done out yesterday (version 1000) and when i move the right stick the drone goes 15ft then stops and wont go any further !.I switched off the sensors and it works ok must be a bug in the hack?.I might try the other version of the hack .I ony really wanted fcc mode but its handy that i can turn on and off fcc, leds ect .
@InfinityDrones6 ай бұрын
@@saltire546 why did you do 1000 and not 1100 if I may ask? If you can't go more than 15ft I think its because you're not logged in to your dji account. So log out and log back in again
@kinderjajce5 ай бұрын
Is there a way to increase vertical velocity speed from 6 and 8 m/s? Which advanced parameter does that regulate?
@InfinityDrones4 ай бұрын
You can change the vertical speed yes, but I think 6m/s is the max
@Powersfilms3 ай бұрын
Any idea if the Mavic 3 Pro Cine will be unlocked? I'm wondering if you unlock the Mavic 3 Pro, if the Cine version would use the same basic process? The Pro Cine would be a great unlock for filmmakers.
@InfinityDrones3 ай бұрын
Sadly only the mavic 3 is currently supported.
@saltire5466 ай бұрын
Is that an rc pro controller you use ? i take it you have not had any issues with using it with this hack .My rc pro is on firmware 03.02.0500.
@InfinityDrones6 ай бұрын
Yes, I have not had any issues with either the RC N1, dji rc nor the RC Pro.
@rubengarciajr75607 ай бұрын
glad they were able to figure out how to rollback the fw to .1000 and hack it. Cause I know a lot of people were on newer versions like .1200.
@InfinityDrones7 ай бұрын
Hi there, all I did was make a video. The Dronehacks guys deserve all the credit
@pirekuastutoriales90584 ай бұрын
I have the mavic 3 classic . It says on the website it supports mavic 3 but i wanted to know if that includes mavic 3 classic??
@InfinityDrones4 ай бұрын
Sorry man... Onky the original mavic 3 is supported as of now
@DRONESCLUB-uk1pm5 ай бұрын
Hello, i have bought a mini 3 with rcn1 normal controller, i wanted to get licence but only mini 3 pro is showing on roadmap and not mini 3 :( Can someone help ? I couldn't fin any contact email on that website either
@InfinityDrones5 ай бұрын
The mini 3 and 4 onky has the fcc mod. So no nfz removal or altitude removal
@djjhon78102 ай бұрын
Hola compre un dji air3 me conviene colocar el software drone hack gracias
@InfinityDrones2 ай бұрын
Air 3 is not supported
@rubengarciajr75604 ай бұрын
I know that the firmware 1001 has been ported to the Mav 3 Classic and Mav 3 Pro, I’m wondering how long until DH releases it for these drones.
@InfinityDrones4 ай бұрын
As soos as they tell me they've got it and it's ready for prime time I'll make a video of it. So keep an eye out for it or sub 😁
@hananeelaquino16686 ай бұрын
Is there a hack for DJI Mini 4 pro to remove max altitude limit?
@InfinityDrones6 ай бұрын
Sadly, the mini 4 is still too new. Not supported yet
4 ай бұрын
CustomFC install failed please remove the battry from the deone and re-instsert. İt bedore connectting the drone again. It gives this error while doing nfz..
@InfinityDrones4 ай бұрын
Wait, which drone are you trying to mod?
@joshmontanez22394 ай бұрын
I’ve been having the same problem
@joshmontanez22394 ай бұрын
Aircraft activation incomplete. If this issue persists, • restart DJI Fly or aircraft and try again (Code: 16100016)
@InfinityDrones4 ай бұрын
@@joshmontanez2239 new drone or has the drone been used? I would hook up toe dji assistant 2 for consumer drones and check that everything is activated
@InfinityDrones4 ай бұрын
@@joshmontanez2239 Have you guys logged that with the dronehacks team yet? Would love to know their feedback and they are very responsive.
@KBProduction19884 ай бұрын
hi bro i have the mavic 3 but it dident work to downgrade from 1100 to 1000. i tryed to download via the link the 1000 version but at the DH app it show this when i import the downgrade file: Info: Fw has lower Antirollback value as drone. Please check the birdmap is a downgrade would be possible with a license.
@InfinityDrones4 ай бұрын
Hi there, do you have a license linked to your drone? Also, you must download the Dronehacks firmware version not the official one.
@KBProduction19884 ай бұрын
@@InfinityDrones yes it was from the dronehack site
@ElodVass_26 күн бұрын
Great Video! I only have one question. When at the end the drone says that you have 100 seconds till auto landing, is that possible to somehow change that 100 second to something like 500 seconds? Thank for answearing.
@InfinityDrones26 күн бұрын
Hi there, the droen will just ignore that autolanding so you can just ignore it :)
@ElodVass_26 күн бұрын
Thanks for answear, but my problem is that I have an Air 3, and i somehow managed to get that autolanding when entering a 500 meter altitude zone, and when i enter the drone says that i have 100 second till auto landing, in that 100 seconds i can change that max altitude to whatever i want, but the time is just not enough to reach some serious height. So if you could help me to somehow change that 100 seconds to 500 second in the code I would be very thankful.
@InfinityDrones26 күн бұрын
@@ElodVass_ no sir. Dronehacks does not support the Air 3 yet. Your issue is the geo restriction and not a parameter on the drone. Sorry man.
@ElodVass_25 күн бұрын
Hey man is there any way that i can send you a video of what im talking about it?
@InfinityDrones25 күн бұрын
@@ElodVass_ Instagram probably. But I can tel you know that anything geofencing related will not be something you can change in parameters. That's locked out completely. Best bet is to sell the air 3 and get a mavic 3 and unlock it as per the video.
@user-wj5nn1cq8d6 ай бұрын
thanks for the video. I downloaded everything and linked the license to the drone and downloaded the file 1000 as in the drone hacks mavic 3 website. Dji assistant is installed and drivers installed also. any idea why the choose firmware button is grayed out and wont allow me to select a firmware to flash. appreciate the help
@InfinityDrones6 ай бұрын
The button is greyed out u till your drone is detected by the application. Once that is done it will allow you to log into the app
@mastuhn5 ай бұрын
with the prehacked .1100 in Europe Remote ID is sending, with the prehacked .1000 RID is not sending. So not only the flashing rear LEDs is the difference between both.
@InfinityDrones5 ай бұрын
That is strange. RID should not be showing on both.
@whitedynamite15554 ай бұрын
I can confirm that .1100 is sending drone ID info. Just checked with 2 different applications and they both pick up the drone and give all the information back to the apps.
@InfinityDrones4 ай бұрын
@@whitedynamite1555 thank you for the update. Please log a ticket with dronehacks, I'll do the same. Lets work together to get all the info we can from them.
@whitedynamite15554 ай бұрын
I’m flashed to .1000 and it works as it should. I’m going to flash back to .1100 and see if I get any different results. Drone Hacks support says both firmwares should have the same results in regard to remote ID blocking. I’ll report back after some tests. Also, if you do not want ATTI mode, you can send command gps_on, and you’ll have Cine mode back with GPS hold.
@InfinityDrones4 ай бұрын
@@whitedynamite1555 thank you for the feedback! Very valuable stuff!
@negritostanis2 ай бұрын
it is now possible with the mavic 3e?
@InfinityDrones2 ай бұрын
Onky the original mavic 3 sadly.
@lloveusa91356 ай бұрын
wow amazing video,this version support g2 glasses?
@InfinityDrones6 ай бұрын
Thank you. Yes 1100 supports the goggles 2. :)
@lloveusa91356 ай бұрын
@@InfinityDrones DJI RC Motion 2 I tested that the rocker does not seem to support double-click unlocking. Does DJI RC Motion 1 support it? I updated version 1100.
@InfinityDrones6 ай бұрын
@@lloveusa9135 Sadly the motion 1 is not supported at all.
@lloveusa91356 ай бұрын
@@InfinityDrones I can't unlock the propeller with DJI Goggles Integra and motion 2.😭
@InfinityDrones6 ай бұрын
@@lloveusa9135 can you start it with thr normal controller like my video where I flew the mavic 3 with the RC N1
@eastkrats-hb8nl2 ай бұрын
Will mini 4 pro or air 3 ever be added?
@eastkrats-hb8nl2 ай бұрын
For NFZ
@InfinityDrones2 ай бұрын
All we can do is hope... The are actively trying to Crack the firmware
@wastedworldexploration28427 ай бұрын
Yet again proving you are infact the lord of drone hacks 🫡
@InfinityDrones7 ай бұрын
Haha I'm just honored to be asked to help them.
@wastedworldexploration28427 ай бұрын
@@InfinityDrones we mere mortals salute you 🫡
@InfinityDrones7 ай бұрын
@@wastedworldexploration2842 haha flattery will get you everywhere 😂. How is your fleet doing? Did you get time to sort them all out?
@wastedworldexploration28427 ай бұрын
@@InfinityDrones actually the fleet has been drastically reduced,I’ve pretty much sold everything I have apart from dji FPV and 1 plane with a 03,and putting the money into a motorcycle,it’s been a tuff decision but I’m going to try this approach for a year and see how I feel then,I allowed things to quickly get on top of me with loads of projects and it became a hassle,so when the uk weather decided it wanted to play the game!,I then wasn’t in the mood,it was a tough year last year so I’m hoping with less stress and hassle I get out and fly more
@InfinityDrones7 ай бұрын
@@wastedworldexploration2842 I completely understand that. It was a tough year. My wish for you is just to be able to enjoy flying and when you get a chance to fly.
@SiyarBerwari-jo8hn4 ай бұрын
My drone is a Mavic 3T. Sometimes when the GPS signal is lost, the drone switches to Atti mode and automatically loses altitude. Is there a way to prevent it from losing altitude?
@InfinityDrones4 ай бұрын
If gps is lost then the drone will use its barometer... that can be affected by many things... How much altitude are you losing?
@SiyarBerwari-jo8hn4 ай бұрын
Recently, I noticed that the more I move the drone in Atti Mode, the more altitude it loses, and sometimes it descends without stopping.
@SiyarBerwari-jo8hn4 ай бұрын
As a practical solution, I try to keep my drone stable in the air, until it goes to Atti Mode, then I raise it to the altitude I want, sometimes it descends so much that its altitude falls to minus points relative to the house.
@InfinityDrones4 ай бұрын
@@SiyarBerwari-jo8hn Remember its not using the gps anymore and the barometer altitude will be affected by many things
@SiyarBerwari-jo8hn4 ай бұрын
I understand you, but especially this drone has such a problem. For example, I used both other Mavic 3 series, they did not have such a problem, of course they were swinging left and right, but they did not lose their altitude.
@ricardomontalban18847 ай бұрын
Will it work with the Mavic 3 Classic?
@rubengarciajr75607 ай бұрын
no, it's only for the mavic 3.
@InfinityDrones7 ай бұрын
As ruben said. It's only for the Mavic 3
@JWard27 ай бұрын
@@InfinityDronescrap. I hope it comes to classic. Thank you for all your videos
@InfinityDrones7 ай бұрын
@@JWard2 I really hope so too! Thanks for the nice comment and support
@Alkhashti756 ай бұрын
for mavic 3 cine which firmware? wm260?
@InfinityDrones6 ай бұрын
Hi there, as per the video... The mavic 3 cine is not supported. Only the Mavic 3 is currently
@ElevatedVehicles6 ай бұрын
Does this work w/ mavic 3 cine (not pro)
@InfinityDrones6 ай бұрын
only the mavic 3 as per the video, sorry man.
@ElevatedVehicles6 ай бұрын
@@InfinityDronesno sweat thank you. I can just sell my cine mavic 3 for a non cine version. I hope it will -allow us to turn off the lights for stealth flights -able to turn off drone ID number for our safety -able to increase horizonal speed -able to remove NFZ restriction😊
@miracle69247 ай бұрын
I am using your hack well. After watching this video, I purchased the Mavic 3 Hack. I would like to ask another favor. I would also like to purchase the Mavic 3 Pro and RC Pro Controller if they are released with the latest firmware. Thank you for always.
@InfinityDrones7 ай бұрын
If your drone is hacked then the RC Pro can be used since the controller does not affect the mod on the drone
@miracle69246 ай бұрын
@@InfinityDrones RC Pro does not pair with the latest firmware. How can I solve this?
@InfinityDrones6 ай бұрын
@@miracle6924 this very stange. The controller should be impacted at all. I suggest you log a ticket with Dronehacks
@saltire5466 ай бұрын
Did you manage to resolve this issue with the rc pro as i have an rc pro and dont want any issues .@@miracle6924
@doytcheva-6 ай бұрын
Does it work for Mavic 3 ciné ?
@InfinityDrones6 ай бұрын
Hi there, as per the video... not yet. Only the Mavic 3
@warsmat6 ай бұрын
Hello ! Does it work on the mavic 3 V2.0 ? I ask because it's not really a variant. Thx
@warsmat6 ай бұрын
(With the 1.00.1000 firmware)
@InfinityDrones6 ай бұрын
Mavic 3 v2.0? What do you mean? Only the Mavic 3 is currently supported. No the classic nor the pro
@warsmat6 ай бұрын
@@InfinityDrones The mavic 3 v2.0 is a version of the mavic 3 with a c1 certification. The drone-hacks support said it should work because it's the same hardware.
@InfinityDrones6 ай бұрын
@@warsmat I understand now. Yes it should work since the firmware files are the same.
@HemajyothiMachupalli2 ай бұрын
My mavic 3 drone after hacking finish ,then trying to connect with PC but doesn't connected ,please help me anyone
@InfinityDrones2 ай бұрын
that is very weird. You should be able to go to the dji fly app and select firmware update. This will remove the mod completely. Then you can retry
@HemajyothiMachupalli2 ай бұрын
@InfinityDrones Hi sir ,trying to dji fly app and select firmware but showing latest update ,any another try pls help us
@InfinityDrones2 ай бұрын
@@HemajyothiMachupalli have you tried a different PC?
@HemajyothiMachupalli2 ай бұрын
@InfinityDrones yes Boss I tried 2 different pcs but same problem not connected to the pc
@InfinityDrones2 ай бұрын
@@HemajyothiMachupalli mmm but it does connect with your phone?
@calvin05124 ай бұрын
I think it's dangerous that the hacked firmware of nfz removal, someone may invade the airport with it.
@InfinityDrones4 ай бұрын
Honestly, the amount of good is WAAAY more than what you're suggesting. Read the comments and you'll see how many search and recue guys have commented etc. If you are really that worried about "invading the airport" then I hope you know that DJI is the only company that has NFZ. IF someone wanted to invadte the airport they could use a super easy and cheap custom fpv drone, any cheap gps drone thats being sold like JJRC Bugs etc. Hell, they could even use any non DJI drone... Point is, if someone wants to do harm there are MANY MANY better, easier and cost effective ways to do it than using a dji drone.
@calvin05124 ай бұрын
@@InfinityDrones thanks you for your comments.
@InfinityDrones4 ай бұрын
@@calvin0512 Just a pleasure :)
@TheXone72 ай бұрын
Well the only thing I am missing on my Mavic 3 is the D-LOG option for the Zoom camera. Almost everything else can get you a huge fine or prison time.
@InfinityDrones2 ай бұрын
Hahaha onky if you break the law of your country. So just don't do it. I my country there are lots of nfz zones that are not remotely correct.
@TheXone7Ай бұрын
@@InfinityDrones Well, I did it. Perfect tutorial by the way. I installed the prehacked FW, however if I use fcc_on or fcc_off and modify in "name", the FW says modified, however the drone always stays in FCC mode. Did you have similar experience? Thanks! :)
@InfinityDronesАй бұрын
@@TheXone7 Aweome to hear thank you. Where are you based? If you'r in the US then the drone will remain in FCC mode since its an FCC country
@yhlin73046 ай бұрын
Can dji m3e be used?
@InfinityDrones6 ай бұрын
Sadly not yet. Only the Mavic 3
@visionnairex4 ай бұрын
Nothing for Mini 3 Pro? 🥺
@InfinityDrones4 ай бұрын
Sadly, new drones take a long time to be supported... no lucky for the mini 3 firmware crack as of yet :(
@visionnairex4 ай бұрын
@@InfinityDrones 🥺 maybe soon
@zhangbin80814 ай бұрын
Can I use mobile network?
@InfinityDrones4 ай бұрын
Sorry what do you mean mobile network?
@rubengarciajr75604 ай бұрын
No this won’t allow you to use 4G LTE to fly
@InfinityDrones4 ай бұрын
@@rubengarciajr7560 only in mainland China does the 4g module work.
@Todd_G_FPV7 ай бұрын
Why do they give u options to download remote firmware if this is just for the drone? Should i get both
@InfinityDrones7 ай бұрын
DankDroneDownloader is just a repository of firmware, all you need is the aircraft firmware.
@Todd_G_FPV6 ай бұрын
@InfinityDrones ok I got the driver downloaded and installed and the 0102 downloaded but it won't flash it
@Todd_G_FPV6 ай бұрын
@@InfinityDrones it will not downgrade for some reason
@Todd_G_FPV6 ай бұрын
@InfinityDrones ok I'm on 0104, it keeps failing and I don't see any options to turn off or on the height or geo restrictions and ive linked my license, it just keeps telling me it can't download the files from dh
@Todd_G_FPV6 ай бұрын
@InfinityDrones I got the driver installed and downloaded the downgrade dhd 0102 but it won't bring up the 01020014 because it can't download it
@LucasJaluL3 ай бұрын
Air 3?
@InfinityDrones3 ай бұрын
No support sorry, still too new. They will trying to get the mini 3 modded.
@Angelokrto7 ай бұрын
Sorry I can not watch the whole video atm but does this work with the latest Flyapp version? v1.12.8
@rubengarciajr75607 ай бұрын
I would think it works
@Angelokrto7 ай бұрын
Did anyone test it yet with the latest version?
@InfinityDrones7 ай бұрын
Yes it does work
@InfinityDrones7 ай бұрын
I have tested it and it works just fine. Just never update the firmware via the fly app.
@Angelokrto7 ай бұрын
@@InfinityDrones Just for clarification, you mean the drone Firmware right? Also thank you for taking your time to test it out.
@joshmontanez22394 ай бұрын
hi, love your videos. i was able to hack 2 of my FPV thanks to your previous video. When i saw this vid a month ago i went and bought myself a mavic 3, not the cine, pro, or classic. just the regular mavic 3. my issue is that the mavic 3 wont connect to the software. it easily recognized both my previously hacked drones no problem, but when i connect the USB to the computer and drone it just say "Info: searching for device.." the mavic 3, when connected pops up as "internal storage(D)" on file explorer im not a computer wizard.. all youtube and learned alot from you. hope you can help me with this weird issue or someone thanks.
@InfinityDrones4 ай бұрын
Hi there. Do you have dji assistant 2 for consumer drones installed on your PC?
@joshmontanez22394 ай бұрын
Yes i do, the software 1.39v recognizes both my DJI fpv drones. But with the mavic 3, nothing. Should i uninstall and reinstall the DJI assistant 2 provided in the link? It’s very odd because i followed step by step on previous video, worked flawless. But this first part a little frustrating
@joshmontanez22394 ай бұрын
@@InfinityDronesi had to uninstall and reinstall the DJI Assitant 2 software Thanks anyways!
@InfinityDrones4 ай бұрын
@@joshmontanez2239 awesome, so you're sorted now. Must have been a driver issue then.
@AleXtazee7 ай бұрын
Any chance we can expect it for Mini 4 pro?
@InfinityDrones7 ай бұрын
Sorry man, I know they will do their best... But the mini 4 is very very very new still
@AleXtazee7 ай бұрын
@@InfinityDrones yeah got you... I think it's the same thing with all the drones using the new RC2. So, Air 3 also, I guess
@InfinityDrones6 ай бұрын
@@AleXtazee Issue is not the RC... but id does make it easier to spot. Remember the Mini 3 uses the same RC as air 2, mini 2 and now mavic 3 and cannot be unlocked. The way to unlock drones is via the firmware on the drone, the controllers dont' have anything to do with it as the drone tells the controller what it can't and cannot do. (hence you request unlock certs via the app for example)
@AleXtazee6 ай бұрын
@@InfinityDrones sure, of course. It's not about the RC per se, I meant, from what I understood, each new RC model represent the next generation of drones, the transmission system.etc.. Like
@InfinityDrones6 ай бұрын
@@AleXtazee Ah I see what you mean. DJI dit mess us all around by using the RC-N1 for so many drones - but yeah I get what you are saying.
@RESISTAGE6 ай бұрын
works on mavic 3pro?
@rubengarciajr75606 ай бұрын
negative, at the moment only for the Mav 3
@InfinityDrones6 ай бұрын
As per the video, only the Mavic 3.
@Todd_G_FPV7 ай бұрын
Says software was not able to download the needed adb framework. What am i doing wrong lol
@InfinityDrones7 ай бұрын
Did you download and install consumer drones and the dji diver?
@Todd_G_FPV7 ай бұрын
@InfinityDrones ok I got it all connected and now flashing 0104c! Thanks man
@InfinityDrones7 ай бұрын
@@Todd_G_FPV fantastic!
@Todd_G_FPV7 ай бұрын
@InfinityDrones ok so I still can't get the bitrate option up on the goggles, what should I do next? I'm on 0104c for drone and 0106 goggles v2
@InfinityDrones7 ай бұрын
@@Todd_G_FPV hey man. I think I said earlier, the dji fpv is not going to show bitrate.
@user-ug7yy5uf5xАй бұрын
how about air3😂
@InfinityDronesАй бұрын
Air 3 is too new. No luck yet
@alexalex52577 ай бұрын
drone hacks stole this mod from the russian hackers 1001 firmware on the mavic 3, its exactly the same thing
@germanweldpoint30057 ай бұрын
And?
@InfinityDrones7 ай бұрын
Stolen is a very strong word to use without any proof. I have it in good authority that the Dronehacks devs are in communication with the author and there are not issues.
@alexalex52577 ай бұрын
@@InfinityDronestrust me, they either stole or hacked the 1001 firmware that was made by the group called Russian hackers for the Russian army now for the war.
@alexalex52577 ай бұрын
Trust me, they either stole or hacked the 1001 firmware that was made by the group called Russian hackers for the Russian army now for the war.
@Matanumi6 ай бұрын
Wish they would all release a mini 3 pro mod
@b.a.d.psychofpv12747 ай бұрын
And when for air 3?
@InfinityDrones7 ай бұрын
Honestly don't know. They are trying their best to Crack the firmware
@Matanumi6 ай бұрын
Or an older mini 3 pro
@InfinityDrones6 ай бұрын
@@Matanumi check the birdmap. That shows you all the supported drones and what features can be unlocked.
@user-bm2ww5tm5r3 ай бұрын
我怎样才能联系你的电报
@InfinityDrones3 ай бұрын
I do not have a telegram account.
@user-bm2ww5tm5r3 ай бұрын
@@InfinityDrones I have something to contact. Can you tell me your ID after registering?
@arigold33385 ай бұрын
Hey mate I love your videos can I please get a free drone hacks license I really love your videos and I have subscribed and I want to set my drone free.
@InfinityDrones5 ай бұрын
Hi there, thanks for commenting. I do not have access to free licenses either... I pay for them all myself.
@germanweldpoint30057 ай бұрын
So many mavic 3 are bricked now, dont use this hack
@ElevatedVehicles7 ай бұрын
O dang what happened!?
@InfinityDrones7 ай бұрын
What do you mean, watch the video there is steps to recover if it fails. Please don't spread false info
@alexalex52576 ай бұрын
@RESISTAGE drone hacks did all the drones before the mavic 3. Russian hackers did mavic 3, mavic 3 pro, mavic 3e, mavic3t and matrice 30(t) with their 1001 firmware. Then the mavic 3 firware got leaked or stolen and thats what drone hacks is selling now, the first version of that hacked firmware, what proves it is exactly the same fuctionality, everything. but the russian hackers one is much more advanced, as it is a much later version, it has even more features as it has evolved with releases. and as only the mavic 3 version got leaked or stolen thats why drone hacks only has mavic 3 and not all the other mavic 3 pro,e,t. But the russian hackers have modded firmware for all the mavic 3s and matrice 30(t) @RESISTAGE
@InfinityDrones6 ай бұрын
Well, I cannot comment on anything that you mentioned here. But if you can get the Russian versions I would love to make a video so that everyone can get the benefit!
@saltire5466 ай бұрын
Put up a link to the Russian hacks for the Mavic 3 editions please .
@InfinityDrones6 ай бұрын
@@saltire546 +1 agree with this!
@mf1695Ай бұрын
Mavic 3C is not yet availible?when will be support?
@InfinityDronesАй бұрын
Only the Mavic 3 - They trying to crack the firmware, but there is no date that can be given as they need to crack it first.
@JWard26 ай бұрын
Will this work for mavic 3 cine?
@InfinityDrones6 ай бұрын
Hi there, as per the video... not yet. Only the Mavic 3
@JWard26 ай бұрын
@@InfinityDrones ah very good ok thank you
@InfinityDrones6 ай бұрын
@@JWard2 Always a pleasure
@Adv_Chen6 ай бұрын
yes,i have succeeded
@ElevatedVehicles6 ай бұрын
@@Adv_Cheno wow! Did you use drone hacks to do it or drone-modz?