What I Would DO - Jumper T-Pro Multi-Protocol Radio

[@Place_It_Here]

Great video, I did buy the radio. I set up the arming using both momentary switches. I thought it was safer. You can go backwards on the pages by holding down the middle button instead of a short press.

[@KerryTheKid]

There will ALWAYS be something new my friend, always.

[@dronecamps]

Always. And I will always be honest with my opinion. 🙏🏼👍🏻

[@MattysDroneWorld]

I just got this radio, and set up my arm switch on the momentary, and it was super simple...actually set it up to use both momentaries for arming, so that way if one is pressed, it won't arm or disarm till both are pressed at the same time.... And so far, I do like it! Great radio, I'm very happy with it. Thanks for tye review Justin!

[@dronecamps]

Good to know you can use and setup both. Seems safer. Still I would avoid those. But that’s me! It’s a sweet radio!

[@RockardGr]

First of all you help me a lot I have 1 question tbs nano se receiver work with this jumper? What option should I buy 1 -2-or 3 ?

[@papamidnightfpv]

I have the jumper t lite and I'm really happy with it. Would be cool if it had a momentary toggle for doing combat though, would love to see what that's like.

[@rocketshipsandrobotsinterg2184]

What do you mean ? Like press it the momentary switch to change to angle mode for recovery in a combat tangle crash with other combat drones ? Sometimes up and down directions of gravity are confusing in the goggles on a hill or trees so angle mode can reset like a robo pilot on a button . I saw branches and leaves twirling onscreen and thought i crashed 3 times but it kept bouncing til i hit angle for a second . Then i got out of there .

[@papamidnightfpv]

@@rocketshipsandrobotsinterg2184 I mean there's no momentary switches on the tlite. They have the rc combat kits but I want to be able to hit a button to shoot instead of flipping toggle switches

[@scu-dub]

First let me say happy 8 year anniversary man👍this vid couldn't have came out at a better time lol I am losing my mind on deciding on a daily driver I have the tx12 and I love the size but with elrs making its mark I kinda want a radio with it already built in and the jumper you mentioned with the 1watt sounds very tempting i was leaning towards the zorro since it has elrs built in also and then just have a crsf module on the back to have the best of both worlds but did I hear you say something about the module you have on the back of that jumper being a elrs/crsf together 🤔 I know frsky is going to be phased out soon enough so I am going crazy deciding on a radio match up lol great vid as always man✌

[@dronecamps]

Don't get it confused. Its just an ELRS module. The External protocol setting is CRSF / ELRS inside the radio settings. You can only use ELRS on this module. Crossfire tracer or other wise for TBS Rx. :) Grab that 1W~!

[@scu-dub]

@@dronecamps yeah man thanks that 1 watt is calling me lol✌

[@dronecamps]

GET IT! :))

[@FpvBudgetBuilds]

Great review. I kinda like the original T-Lite a bit better due to the switches. I use the T12 Pro, but have been entertaining the thought of the T-lite for a long time. With ELRS it changes things for the game controller style radios for sure. 👍

[@rbFPV]

To go to the previous page, just long press the page button

[@dronecamps]

Dude nice tip. We all appreciate that Hongmin.

[@ModModRc]

The jumper t pro does has a back button. I seen on a video you must Long press/hold to go back. Im thinking of getting one. Do you know if it will control my Betafvp meteor75 drone, its SPI Frsky & my goosky s1 helicopter S-FHSS? Will it do both of these?

[@housinit]

I've been waiting for a new gamepad style radio ever since I got my X-lite years ago. Almost got the T-lite....then kinda wanted this one, but I'm still holding out. That momentary switch thing kills this one for me. Also, I'm pretty sure that ELRS requires you to use AUX1 as your arm switch. I've never had to try to change OpenTX AUX channels, but I'm assuming you can change what AUX a switch is, maybe? Like can you tell OpenTX to use the 3 position switch as AUX1? Anyway, Jumper almost had me with this one.....I'll be waiting for them to make the momentary an actual switch. Thanks Justin!

[@dronecamps]

Yw man. Weird they did that huh.

[@trekkin_fpv5272]

Not sure why this isn't being mentioned more, but a momentary button is great for beeper. I don't keep my beeper on constantly, I don't want to risk hurting my motors (which is theoretically possible) ... and you can use the right one for turtle mode. Disarm, left momentary for beeper, right momentary to turn on turtle mode, rearm, flip - release. Easy peasy.

For my information , how can you hurt your motors with the beeper ? I'm not sure I understand how you setup the various buttons ? Which button do you setup to arm/disarm ?

[@trekkin_fpv5272]

@ if you use dshot beacon, which turns your motors into a beeper, technically there's a risk

[@Kaldrack]

i recently got the tpro with integrated elrs, and it seems like jumper heared the feedback about the missing 2 position switch, as now there are 2. Between the on/off switch and the scroll wheel (1 on each side)

[@Mupshot]

Nice rundown

[@rocketshipsandrobotsinterg2184]

You can put your beta fpv lite tx into the jumper T-PRO case if you got a micro lr module adaptor on the back to save buying nano modules .

[@eprohoda]

mr! how incredible picture.have a good day,😍

[@dalewhitmore143]

Ok so I'm trying to use the 3 way switch for arming but I have set it as a 2 way switch. In the bottom position it is not armed but when I move it to the center it's armed. I want to make it work only in the fully up or fully down position and I can't get it to work like that, I'm sure there is a way to do it. I have contacted support but no one ever replies.

[@rocketshipsandrobotsinterg2184]

Do you like the baby ape $79 3 inch as a spare like tinyhawk ? Or does tinyhawk just run forever ? Emax tinyhawk is so precision quiet it makes my other drones seem like crap

[@danielpoulin19]

Question about the jumper t-pro,,,i'm looking to get it,and i'm wondering if you can tell me if the integrated elrs also has multy protocol in it ?i dont know much about transmitters and its not clear on the sellers web site if multi protocol in all t-pros

[@Indy64738]

Hi! Good video, since you’re flying helicopters, It would have been cool to have a few words about it… I can’t not use the momentary switch, since I need the left 3 positions switch for idle up 1 and 2, and the right 3 positions switch for my rates… How would you set this tx up for an helicopter? Thanks.. 😎😎😎

[@gregorydahl]

Wow you made sticky arm switch 30 seconds short explaination . How about acro on the momentary press button so you can panic release in a tangle tree branch . My jumper tpro the battery compartment springs come loose in backpack travel .

[@FabioKastro]

Man, i really want to sell my Taranis X9D Plus and get a Jumper T-Pro. I would like to keep my 4in1 and still have ELRS

[@henrique4329]

Can i use external module TBS Crossfire Nano whit T-Pro ELRS version?

[@joelewandowski8232]

I like my jumper t lite and Im waiting to see what zorro has to offer.

[@SeeFPv-qm6ie]

can you use the three position switch to arm and use it as a mode switch

[@Skiinye]

ANY DIFFERENCES BETWEEN ELRS AND 4in1?

[@SeeFPv-qm6ie]

how do you install SD card firmware I already installed it on my SD card but when I turn on radio it doesn't recognize update

[@RobtestRandG]

Do you have a link for those thumbpads? I tried searching but couldn't find them. TIA !

[@dronecamps]

It’s possible they stopped making them

[@mr.crowley3542]

What about using both momentary switches as a pre-arm + arm switch? You have to hold one pressed and then press the other one...it would be pretty safe.

[@dronecamps]

You can do that too. I’m still not seeing a button as a safe arm option. Too easy to press by accident. Trust me.

[@dalewhitmore143]

Hi. Do we need the external ELRS module to run a crossfire receiver on the T-pro?

[@ammar6937]

If you want to use a crossfire receiver then you need the crossfire module also

[@nicklaw040]

Diego loves flying with his TX antenna vertical but his quad antennas are all horizontal.🤣

[@dronecamps]

😂🤟🏻✨

[@aylenstudios]

is it possible to change the t pro to be stick mode 3? If it is possible, how hard is it

[@danielsimental2803]

You guys know if the AG01 minis fit on the T Pro?

[@edfroxt7294]

There is an option to configure arming with two momentary switches and it is pretty safe

[@dronecamps]

Maybe? But my advice is don’t use it at all. Just use the 3 position switch on the left as your arm switch. The momentary switch is bound to give you a accidental arm! Bardwell suggests moving the throttle stick up after disarm. But I would avoid the momentary switch as an arm switch. - Thank me later. 👍🏻

[@edfroxt7294]

@@dronecamps Yes I agree with You. Anyway we can map that momentary switches to something less harmful like beepers, blackbox recording, etc. , so they are not so useless)))

[@nicklaw040]

@@edfroxt7294 I have my momentary switch on my Mambo setup for flip over after crash.

[@ObinnaEke]

Any idea when the T-pro will come out with the built-in ELRS module?

[@dronecamps]

They messaged me this week and said soon. Prob in Feb.

[@BrainDeadEngineering]

No scroll back menu button ? Have to cycle through all lines back to top again you say ? Ugh ! That's crazy. ( great Intel ty

[@dronecamps]

Someone said if you long press the button will go back. But me personally I’d like both buttons ?

[@BrainDeadEngineering]

@@dronecamps exactly my friend . Yes the real estate is small on them game pads but menus navigation should be priority , hey we just want to get an install and rip one ! A small scroll wheel with wheel push option I think was the benchmark way of NAV a setup menu.

[@mattentrican3109]

Hey FYI. If you hold the page button down it will go "page back"

[@JONHFPV]

where can i get the radio jumper t pro manual

[@dmcappello]

I believe if you hold down the page forward menu button for a long press it will take you back a page. Don’t hold me to that but worth trying.

[@dronecamps]

Ha for sure. Three other dudes also mentioned that ;) Personally I prefer a back button. But ya know. More space.

[@dmcappello]

@@dronecamps yeah dude I agree with you, that would be way simpler. I’m waiting for my t-pro to come from China, banggood got me waiting by the mailbox again!

[@Valhallaaaa]

Looks like there is 1W internal ELRS... I am thinking about cancelling order on Zorro because its only 250mw and buy T pro 1W what do you think guys

[@sadboybushido]

Yeah dude. Zorro is ugly + it works off of short 18350 batteries, which is weird af. Most of us have 18650 laying around, so Jumper all the way, man! Also, 1 freaking watt, almost similar price and great looks. Idk, zorro is no competitor to T-Pro. Maybe only to BetaFPV Lite Radio, lmao.

[@Valhallaaaa]

@@sadboybushido I have to say i like Zorro design more... I mean those switches bigger screen andjustments and a lot more... Those 18350 is strange choice but i have to say that if battery life will be like 5+ hours its even beneficial because weight will be lower with inaf battery life... I Also have a lot of 18650 so i prefer it but i think those 18350 will be good... Only thing i dont like is that 250mw. Someone told me its more i need but for someone new who see only numbers 250 seems little... Also i am curios about 1W internal Board in t pro. Every external module is cooling even 500 or 1w and sudenly one 1w is hermetically closed in small radio?! I just didnt get it...

[@Valhallaaaa]

@@sadboybushido I afride that t pro will have like 500-1000mw internal and it will be frying inside and soon it will be known weakness of it... I just ask what people think about that 1000mw internal and range of 250mw because i am new in FPV i am waiting for Zorro for my first flight... Anyway today i get mail its shipped so i will try it and keep it or sell it later...

[@sadboybushido]

@@Valhallaaaa then you're one of the guys who are into weird designs haha. Actually, the screen isn't important. The screen on T-Pro is good enough, unless you have a VERY bad eyesight. 1000mw very stable, because if the radiator inside.

[@sadboybushido]

@@Valhallaaaa and yes, 250 is probably even more than you need as a newbie. But eventually, you'll find yourself needing more power as you progress in the hobby. And you'll outgrow this radio. OR you'll have to buy an external 1w module and make you ugly radio look even uglier. And don't forget, that it's not only about range, but also penetration.

[@jefu05]

arm switch is allways the question, sometime doesnt work well... its a big issue

[@loganlexow]

Long press the page button to go back a page. No need to scroll through them all. As a plane guy I'm waiting for the commando. I really wanted to like this but the momentary switches kill it for me.

[@dronecamps]

Long press to go back would take some getting used to. I prefer the extra button myself. Yeah momentary switches hmm

[@bushythebird]

Hey bud, I am dealing with someone on WhatsApp that is claiming to be you. Can you confirm that it is before I do something stupid and send money to a scammer?

[@bushythebird]

Thanks.

[@dronecamps]

Report him. He’s not me!

[@bushythebird]

@@dronecamps that’s what I thought. They said I won your October giveaway and wanted me to pay $80 shipping.

[@carmineparavia2147]

You can go back in the menu by keeping the key pressed!

[@dronecamps]

Yes I heard thanks Carmine :)

[@rotorfpvstef3313]

Et la nirvana flysky avec sont module long range flysky fr302 afhds3 je suis déçu 😞

[@jeydronefpv]

🤩🤩🤩🤩🤩🤩👍👍👍👍👍🚁🚀💯🖖