Drywall Receptacle Mount Install

[@mrb6597]

Nice and flat and flush with the wall! Except for the mud taper to cover up the flanges.

[@jlmeza]

What outlet cover plates are you using? the ones I purchase have a larger spacing

[@manuelgomez2715]

If you set the box back, wouldn’t that be against code, since the box should be flush with the drywall. I really like the looks, I just want to make sure that it’ll pass inspection 👍 Please let me know your thoughts about this

[@davehooper5462]

If you look, the box isn't set back. It's just that the drywall around it is removed. Take a look at the tabs on the box. They're flush with the stud which is where they should be

[@manuelgomez2715]

I see, thanks

[@mangos2888]

Could totally do this since I’m repairing walls anyway. :)

[@fittes.]

We love to hear that Krystle :D Let us know if we can be of any assistance --> [e-mail]

[@autismmom8773]

That would not be flush with the wall, if you tape and mud over top of the casing.

[@marclrcq]

nothing is flush when you mud it, that's exactly how beads work one side needs to be beveled.

[@thepokeworker7807]

Now show me how to remove cover with little to no damage

[@Jfff-ugfgh]

Bad idear , not good for maintenance in the future.