Tap to unmute

DRZ400SM Stainless Steel Brake Line Install! Core Moto!

  Рет қаралды 5,022

Link’s Garage

Link’s Garage

Күн бұрын

Пікірлер: 63
@weaselteat
@weaselteat 2 жыл бұрын
Your JD jet kit install was so good I had to watch this one too. I wasn't even considering getting new lines on my DRZ until now. The good old gatorade brake bleeder bottle. Keep up the great DRZ mod videos.
@linksgarage1985
@linksgarage1985 2 жыл бұрын
Thanks! I appreciate that. They really feel so much better than the rubber lines! And they set it off in my opinion. I appreciate you watching!
@gufiaito69able
@gufiaito69able 2 жыл бұрын
Considering buying a 2009 drz sm and you videos are going to save me a lot of money on labor costs thanks.
@linksgarage1985
@linksgarage1985 2 жыл бұрын
Well, they were the same for the last 22 years. So all of my videos, should be applicable! Thanks for watching I appreciate it!
@davidhoward8951
@davidhoward8951 10 ай бұрын
I got one for sale
@paultinwell5557
@paultinwell5557 3 ай бұрын
Way to go! An impact driver to install M6 screws and hydraulic hose fittings. Outstanding work! Truly outstanding. For all you other non-professionals out there, DO NOT DO THIS!
@linksgarage1985
@linksgarage1985 3 ай бұрын
@@paultinwell5557 Thanks for watching!
@korabeats_
@korabeats_ 2 ай бұрын
Why are people so weird about small battery impacts? 🤣 Have you actually ever used a small impact and then tested it against a torque wrench, or just parrot what everyone else says? M6 bolt gets torqued to 10-12ft-lbs depending on the grade. Most motorcycle bolts are grade 10.9 or 12.9. Unless you're being stupid and holding the trigger down for a ridiculously long time, you aren't going to break the bolt. Take the OEM grade 10.9 M6-1.0 x 16mm flywheel bolts on the DRZ. They get torqued to 10ft-lbs and don't break until about 19ft-lbs. Good luck hitting 19ft-lbs with a few hits on a small impact. Hell even the M5 bolts for the stator I installed with my impact and a quick tap of the trigger once seated and it still turned about an 1/8th of a rotation with my torque wrench before clicking at the 84in-lbs (7ft-lbs) spec.
@adambrand5692
@adambrand5692 2 жыл бұрын
More box punches, it really ties the video together
@linksgarage1985
@linksgarage1985 2 жыл бұрын
🤣🤣🤣
@CraigSmith568
@CraigSmith568 2 жыл бұрын
Went to get DOT 4 and all they had was DOT 5.1. I thought that was synthetic, but it turns out it is compatible with DOT 4. The synthetic is DOT 5. I have one of those hand vacuum pumps and ended up getting one that uses an air compressor from Hobo Freight. I like it a lot better.
@linksgarage1985
@linksgarage1985 2 жыл бұрын
Yea, the compressor style is much better. I have one also. I typically try not to use stuff that’s 2 fancy in these videos. Just so people don’t get intimidated to do the repairs themselves.
@ayydubbx6076
@ayydubbx6076 2 жыл бұрын
Damn bro those look clean as hell! I want the blue and white haha. The punch box punch helped the info sink in too
@linksgarage1985
@linksgarage1985 2 жыл бұрын
They make them!!!!!!!! Thank you!
@jbean530
@jbean530 11 ай бұрын
I like the purple I can’t decide between red or purple. Looks seeet.
@linksgarage1985
@linksgarage1985 11 ай бұрын
Thank you!
@mrsmel269
@mrsmel269 2 жыл бұрын
must haves right there . nice work Link!!!!
@linksgarage1985
@linksgarage1985 2 жыл бұрын
Thank you!!!!💪🏼💪🏼💪🏼
@cullennowell7813
@cullennowell7813 8 ай бұрын
He really likes the way he looks punching that cardboard.
@linksgarage1985
@linksgarage1985 8 ай бұрын
👊🏼👊🏼👊🏼
@davidhoward8951
@davidhoward8951 10 ай бұрын
I looked at the same brake line but I have a braided one on mine but like you said you need to get that brake line out of the way of the mono shop I used to zip tie but my brakes don't feel right I'm going to bleed them change the brake fluid also where'd you buy that pump can you get a harbor freight
@linksgarage1985
@linksgarage1985 10 ай бұрын
Man, you don’t even need that pump. Just a hose, and a bottle. Put the hose in the bottle, pump it. Hold it. Crack the fitting. And repeat that until you get no air bubbles and just solid fluid in the line. You’ll be good to go!
@jessel1217
@jessel1217 2 жыл бұрын
Def getting these for my 22 SM. Within 20 minutes of riding on a cold start I can feel the mushyness set in. Had steelies on my Subie WRX and it was night and day as well. Great video!
@linksgarage1985
@linksgarage1985 2 жыл бұрын
Thanks man!! For sure, easily one of my favorite things I’ve done. And I think it was only like $160 for the pair. Thanks for watching!
@davidhoward8951
@davidhoward8951 10 ай бұрын
What kind of exhaust system are you running I have a Yoshi on the back of mine 2005 DRZ Supermoto but it's gutted as loud that one looks nice I probably didn't cause half the price also what I'm doing on mine is putting a Trail Tech speedometer it has a tachometer temperature reading and I bought the bracket at Amazon looks really nice
@linksgarage1985
@linksgarage1985 10 ай бұрын
In this vid it’s a Delkevic. But now I run a Barkers. Check the channel for the video. And I have a Trailtech in my banshee Supermoto!
@mfattomica3196
@mfattomica3196 2 жыл бұрын
looking sharp. would of never expected black & purple to look so good.
@linksgarage1985
@linksgarage1985 2 жыл бұрын
Hell yea!!! Thank you. It’s definitely different then most others out there. Which is what I was shooting for. Thanks for watching I appreciate it!
@terryerickson4697
@terryerickson4697 2 жыл бұрын
Another great job. Do you mind me asking what kind of floor jack are you using and do you like it. I’ve been thinking about getting the Ride On lift. Keep up the great work
@linksgarage1985
@linksgarage1985 2 жыл бұрын
Of course I don’t! I might make a quick video on it. I’ve had a lot of questions about it. In summary. It’s made by Tusk. And it’s great. Here’s a link to buy one. Thanks for watching. I appreciate it. TUSK Adjustable Lift Stand www.amazon.com/dp/B0028M0526?ref=ppx_pop_mob_ap_share
@Crab.Ragoon
@Crab.Ragoon 8 ай бұрын
Im sorry maybe i missed it in the video. Did you choose stock length? Or did you add length?
@linksgarage1985
@linksgarage1985 8 ай бұрын
Stock length!
@evanwessel1207
@evanwessel1207 Жыл бұрын
Did you order these in the stock length?
@linksgarage1985
@linksgarage1985 Жыл бұрын
Yes!
@acebaggem2444
@acebaggem2444 2 жыл бұрын
Will you be installing case savers?
@linksgarage1985
@linksgarage1985 2 жыл бұрын
Yep!! Coming soon
@melvinnevarezelmenol6226
@melvinnevarezelmenol6226 Жыл бұрын
Where can I buy the red pump that you use?
@linksgarage1985
@linksgarage1985 Жыл бұрын
Harbor freight, Lowes etc.
@elementboi151
@elementboi151 2 жыл бұрын
well this is someting else to go on my list on stuff to order lmao
@linksgarage1985
@linksgarage1985 2 жыл бұрын
Boom!!!! Thanks for watching!
@seths3011
@seths3011 2 жыл бұрын
Did you get the factory size lines or did you add any inches
@linksgarage1985
@linksgarage1985 2 жыл бұрын
OEM size.
@seths3011
@seths3011 2 жыл бұрын
@@linksgarage1985 perfect thank you I will be ordering tonight
@linksgarage1985
@linksgarage1985 2 жыл бұрын
@@seths3011 hell yea! Thanks for watching!
@seths3011
@seths3011 2 жыл бұрын
@@linksgarage1985 absolutely you have one of the best drz pages out there👌. Should get into moto vlogs too, would be sick
@linksgarage1985
@linksgarage1985 2 жыл бұрын
@@seths3011 next on the list! Got a go pro 10 already.
@thebeardedplumber757
@thebeardedplumber757 2 жыл бұрын
Hey what are your thoughts on the drop bar link that lowers the drz? Good idea bad idea?
@linksgarage1985
@linksgarage1985 2 жыл бұрын
If you are a shorter rider it’s a good idea. Seat height is about 36 inches.
@supermoto_problems
@supermoto_problems Жыл бұрын
What are your reasons for getting this brand?
@linksgarage1985
@linksgarage1985 Жыл бұрын
Core moto and Galfer make the best lines out there in my opinion. 💪🏼
@linksgarage1985
@linksgarage1985 Жыл бұрын
Plus, the colors are fully customizable.
@supermoto_problems
@supermoto_problems Жыл бұрын
@Link’s Garage cool. I haven't been able to decide so I'm glad I asked. I was looking into Galfer, but I liked how this one you got looked.
@linksgarage1985
@linksgarage1985 Жыл бұрын
@@supermoto_problems all good man
@davidhoward8951
@davidhoward8951 10 ай бұрын
You want to sell your rear brake line I'll take it with all the fittings
@linksgarage1985
@linksgarage1985 10 ай бұрын
No sir. I keep all my parts. Never know when you may need them. Thanks for watching!
@80daymond
@80daymond 2 жыл бұрын
What size was your rear line?
@linksgarage1985
@linksgarage1985 2 жыл бұрын
I just ordered factory lengths. I didn’t have to measure. They already had the option on their website.
@leog9844
@leog9844 2 жыл бұрын
I hope this is for a girl🤣🤣🤣🤣
@linksgarage1985
@linksgarage1985 2 жыл бұрын
Nope
@xcessdj
@xcessdj 2 жыл бұрын
Do you have an Instagram?
@linksgarage1985
@linksgarage1985 2 жыл бұрын
Sure do! @scottlink_l5p
@xcessdj
@xcessdj 2 жыл бұрын
I just followed 👍🏻
DR650 Front Braided Brake Line
35:18
Biker Bits
Рет қаралды 8 М.
How To Install Steel Braided Brake Lines On Motorcycle
17:24
Nick Buchanan Racing
Рет қаралды 65 М.
Гениальное изобретение из обычного стаканчика!
00:31
Лютая физика | Олимпиадная физика
Рет қаралды 4,8 МЛН
DRZ400SM Wave Rotor And EBC Brake Pad Install!
19:30
Link’s Garage
Рет қаралды 5 М.
HEL Steel Braided Brake Lines Install | Yamaha R6
12:30
Chaos Causes
Рет қаралды 42 М.
DRZ400SM Motodash install
7:38
cjproductions1996
Рет қаралды 2,3 М.
DRZ400SM Clear Oil Filter Cover!
15:52
Link’s Garage
Рет қаралды 8 М.
How To Make Custom Brake Lines For Your Motorcycle
34:41
lowbrowcustoms
Рет қаралды 64 М.
Should You Buy A DRZ400SM?
16:33
Link’s Garage
Рет қаралды 17 М.
DRZ400SM core moto stainless steel brake lines
12:35
cjproductions1996
Рет қаралды 520
Moto Dash USB Charger Install DRZ400SM!
12:40
Link’s Garage
Рет қаралды 11 М.
How to Use the Suzuki DR-Z400 S/SM Instrument Panel
8:11
Cody Woods
Рет қаралды 43 М.