DS-KD-TDM - Hikvision Touch Display Module

[@NicolaSturgeon-pl4bs]

In case people are wondering....you don't have to connect to the WiFi signal of the TDM to configure it and set it all up but also...the unit only broadcasts its signal in 2.4Ghz and not 5Ghz

[@MatteoAdreani]

Hi, thanks for your video, and congrats. A couple of questions, I can't upload theme images, which is the correct format/size? And with motion detection enabled is there a way to display first the desired screen? Thanks in advance.

[@fukpinglam1710]

hi there,the screen won't stay on ,it will go off sometimes,I has been enable the montion detection already,any idea ?thank you

[@t0bse1337]

i updated my TDM with the help of your video/links a year ago. it's running V1.0.1 220815 - now i wanted to upgrade to the newest version V1.0.1_231008 but it always gets stuck at 50 percent. the gui says "upgrade failed" and the TDM is freezing. i can power off the KD8003 and the TDM and it is working again. but the upgrade always fails, do you know any help to this? i also found the firmware V1.0.1_build230717 but i get the same error.

[@alessandrogorla1149]

An information, the theme is always shown on the display or after a few seconds the display turns off? Thank you

[@fortusireland]

It will turn off automatically. You can turn on motion detection in the KD8003 and it will wake the DS-KD-TDM.

[@djchv]

we have a problem ... we replaced the old DS-KD-E with the new TDM, but we can't get the RFID chip reader to work, it doesn't respond to the chips :-( why not... do you have any idea ???

[@fortusireland]

Hi, DS-KD-E is an EM (125KHz) card reader where DS-KD-TDM has a Mifare (13.56 Mhz) card reader built-in.

[@djchv]

@@fortusireland oh shit ... what a shit action from hikvision... aaaall Chips we must New buy :-/ Have you a idea , the picture Theme on tdm, go on by motion ? When a guest coming? Is picture/theme all time on by you ???

[@fortusireland]

@@djchv Ahh, it's not a shit action from Hik. You were able to get the new display module that supports your EM cards. It's a different code of the device - DS-KD-E or DS-KD-TDE. They're just less popular. Unfortunately you got the wrong device. I will check the themes settings on the newer firmware and let you know :)

[@djchv]

@@fortusireland When does the topic picture come on for you? I can't understand it, sometimes when I go out and look at it, sometimes the display is just black, I don't understand which rule applies to that

[@fortusireland]

@@djchv You can turn on motion detection in the KD8003 and it will wake the DS-KD-TDM.

[@djchv]

THX!