DSDplus Trunking Setup 1.08t

This is how to install DSDplus to do trunking using version 1.08t available from the fast lane early access.
Some note from the maker of DSDplus:
FMP and DSD+ audio device numbers are "different" because FMP uses output devices and you were looking at DSD+ input devices (which is correct when linking to FMP/SDR#); in/out numbers can be different because you might have different devices, like an extra input or output device, which can shift all of the following devices numbers.
Also, if you make a device the default in or out device, it becomes in or out device #1 (IIRC), which again, shifts the other device numbers.
Network and site names have to be manually added to the DSDPlus.networks and DSDPlus.sites files. Systems do not broadcast these names.
When trunk voice following, the four FMP/DSD+ console windows ("DOS windows") do not provide much useful information; they can be minimized (by clicking minimize button in upper right corner of window)

[@dsdplusinformationminister3521]

This video has been approved by the DSD+ Consortium and is recommended for viewers of all ages.

[@ch40sth30ry]

Great video! Got me up and running with 1.08t in no time. Thanks!

[@scotthalligan4675]

Great job. Thanks very much for your time and efforts!

[@BoZmD]

Thank you. This video taught me so much!!!!

[@johnspace1876]

Thanks for the video. Lots of use full info.

[@JohnMillerwashere]

John Space Thanks for watching!

[@gertjandembele6583]

Thanks for the video its works now great Thanks to U many Thanks and i am to member of the DSD+ Fast Lane program.

[@denispoupart1202]

With this version, you no longer need to pipe in audio from SDR# or Unitrunker? When do you expect this version to be released? I'm using ver 1.074 and having lots of problems getting it to decode. Great video, easy to follow, thanks.

[@gregk5505]

Will this work for DSDPlus 1.101 and RTL-SDR

[@johnny45irish]

How do I find out the mode and every other bit of information on radio reference. none such info is available in my country.

[@i8uwithalime]

Yeah, let me extract the files on my desktop too. Assuming I knew where you downloaded from.

[@geraldellis1177]

does this catch gps signals too

[@reconrider27870]

ok what about channel numbers for sites that arnt listed on rr? liek the nc viper system they dont have channel numbers

[@Peterswarahed]

I have a question about dsd plus 101 ..i seem to be getting a strong signal in the oscilliscope but it fails to decode anything...also saw a failed sync message. I'm getting a lot of hits from unitrunker although its signal is usually in the red or yellow at best,, I can change my atennae but I dont think thats the problem..do i have to edit someting in dsd plus bat files for it to work properly?

[@geraldellis1177]

does this require two rtl sdr dongles

[@boland1914]

how do I fix inverted audio in dsd+ it sounds choppy and nothings clear

[@kaarlolehtimaki3659]

Hello. I just got the DSD+ 2.39 update and I am just having one little issue if anyone on here can help me with. Thanks

[@SkipMuck]

P25 Phase II not yet?

[@JohnMillerwashere]

SkipMuck Nope, wish DSD+ did do it!

[@fredp8486]

Can this be done using a scanner with a discriminator and a dongle. Or would it work better with two dongles. If using two dongles would you get better results using two airspy dongles instead of two cheaper dongles ?

[@JohnMillerwashere]

+Fred P It can be done with a scanner and a discriminator tap and a dongle. I do not think it can be done with two airspy. You could use the airspy and the dongle though.

[@007richardc]

how to do the same in 1.101 and how to buy fastlane

[@denesek2]

Where can i get DSDPlusp080 ? :/

[@JohnMillerwashere]

Denis SnoXyes DSD+ Fast Lane -------------- Early access to features is being offered through the DSD+ Fast Lane program. Fast Lane updates are expected to be released every 7 to 30 days. Some Fast Lane updates WILL have issues/bugs. That is the nature of alpha software. These are a few of the features that are being worked on: better tablet support IDAS/NEXEDGE/Cap+/Con+/TIII trunk voice following per-call audio recordings other needed DSD+ upgrades FMP upgrades squelch drift tracking selectable sampling rates adjustable windows sizes TCP client/server mode (eliminates VAC / VB-C) multiple VFOs Airspy support Fully tested public releases will continue, but less frequently, probably every 4 to 6 months. In light of the extra workload the Fast Lane program will create, the DSD+ team is asking Fast Laners for: US$10 for one year of Fast Lane updates US$25 for unlimited Fast Lane updates Donations above these amounts are welcomed, but it's up to you. We're not looking to get rich here. Funds will be used for things like needed hardware upgrades. Funds can be sent our Paypal account ([e-mail]) Please include a comment that specifies the email address that your Fast Lane updates should be sent to.

[@anthonystaab1604]

how do you use this for windows 10? your video does not match 10

[@powermax104]

Hello there, I don't have access to this version of DSD+ but I have downloaded version 1.074. I'm having trouble getting it to work though. I've a feeling it's because I've followed instructions on slightly older versions of the software and now my brain is fried after many hours of reading guides and trying my damndest to get it decoding. Could you possibly send me your email address? I'd be very grateful indeed!

[@johndeeregarage542]

does this do P25 Phase I?

[@JohnMillerwashere]

+JohnDeere Garage Yes it does do P25 Phase 1

[@geraldellis1177]

can I use dsd+ without sdr#

[@JohnMillerwashere]

Yes if you use a scanner/radio with a discriminator tap and use the mic/line in on your computer.

[@geraldellis1177]

no I got two r820t dongles

[@glitch2615]

i like unitrunker more.

[@gertjandembele6583]

Thanks for the video its works now great Thanks to U many Thanks and i am to member of the DSD+ Fast Lane program.