Homemade 200cc MOTORCYCLE of CAR TIRES !? / PART 1

[@deepakkv81]

11000 dislikes for what? Jealous!! How many of you can do something like this from scratch. This is not about style or finish, its about doing what we envision, seamlessly. This is awesome. Way to go kid. Keep it up and keep it going. This is raw talent, not many of us have. Kudos.

[@pavelh883]

Yes, there are some technical issues as mentioned in comments below. Yes, it might look more perfect. But, what I liked to see is a young guy crafting with pleasure instead of sitting at FB and posting nonsense. Seems mankind is not lost . Good job, keep creating

[@idirisali5657]

Pavel Hubko same siting fabebook just great mistake as thy r perfecthhh u r bro

[@tigerseye73]

Not the prettiest motorcycle, but I admire your tenacity. For a young guy, you have developed good hands-on skills. Most guys your age wouldn't know which end of the drill to hold. You have something else critical to success. Determination. Keep growing. Wish you the best.

[@MrMassive321]

it looks better than a bmw boxer

[@baribari8878]

\

[@supertramp6011]

Dang, this is so rough, makes me feel better about my’ hold it , squint eyes,and weld scrap together’ techniques! Love the fact he’s actually out there doing it though, using mostly scrap he has lying around. I’m sure many kids will have hours of fun riding( and mending!) this wacky bike!👌💪

[@Thinker2-truth]

Nice concept, needs planning. The chain "tensioner" goes on the none tension (slack) side of the chain. Otherwise every time you apply torque the chain will jump to straight. See when he revs, the clutch grabs, and the tensioner jumps, till the chain is pulled straight and all the slack goes to the none-tension (slack) side of the chain.

[@TwonGwenoAgerr]

Good observation

[@llovendale3251]

i was a bit concerned of the caliper of the brake in front.. will it hold?

[@Thinker2-truth]

See part 2 - what bothered me most is mounting the rear break resistor up-side-down. the other issue is car tires are flat, bike tires are round (profile). It will resist rolling from side to side. Looks kool, but is it?

[@Duane002]

Few issues I noticed. First, you can’t change the rear brake disc or the rear sprocket because you welded the them backwards (toward the inside of the bike. And the chain tensioner should always be applied to the non load side of the chain (in this case should be on the bottom not the top. And the handlebars will break loose with that Amal pipe unless welded.....

[@alen9591]

Mnogo si pametan i inteligentan decko i dosta mnogo znas za svoje godine. Od tebe ce biti jedan veliki majstor. Pretpostavljam da si od oca narucio sve to i da vodi neki obrt dok toliko toga znas. Svaka cast!

[@DShomemade]

Hvala ti od

[@azadko2355]

@@DShomemadeh

[@cepos1252]

@@DShomemadeu

[@RamKumar-bj3yx]

O

[@ahmedrasoul6634]

@@DShomemade VJIO Cy

[@adn9824]

Great video. I felt that you didn't bother to take care of the details. The cables, for example, could have been hidden in the tubes of the frame. But you just gave the basic to make it work. I liked this spirit. I am in Africa, and from where I am, I say hats off

[@tunh9272]

Fire

[@ВдовенкоАрсентий]

Поставил лайк пацану только за то что делом занят, а не колится или шныряет в поисках надивы, молодец. Ездить на нем не советую если жизнь дорога.

[@nevermind194]

Вдовенко Арсентий Че там ездить то, к тому же у них там дорогии ровные

[@mohamedahanout9738]

First you are an artist, plus you deserve the title of an expert professor. Congratulation

[@thantran6224]

Brilliant boy but I don't think he dares to drive it @ 35 mph . Without struts/shocks and strong supports, the bike will be broken in pieces driving at that speed.

[@rickyb6086]

Very ingenious, and car tires will practically last 10× longer than ordinary minibike and motorcycle tires, they're way cheaper too! I have a pitbike with an 80cc engine in it, I might try this idea. It probably won't go very fast, but 20 mph is a lot better than walking! Lol, awesome video!

[@Kanisty]

Купил сварочный аппарат - вари всё подряд! Не обязательно качественно, прихватывай как придётся. А по технике... Натяжитель цепи - шедевр! Я уже лет в пять понимал, какую часть цепи натягивать надо! Глушитель - отдельная песня, пупурри из разных кривых обрезков труб. Ну а несоосные колёса - это полный треш! Надо было ещё сиденье сбоку от двигателя поставить, чтобы усилить ощущения дискомфорта своими руками!

[@boss_uyee]

Idenya sangat luar biasa😁 semoga channel saya ramai seperti kamu. 😇 salam dari indonesia

[@ИльяМишагин-к5у]

Ты можиш покотать

[@antonjosekurirojas3509]

Хорошая работа, извините, я не говорю по-русски, у меня есть работа на мотоцикле, адаптирующая четырехтактный двигатель 160cc husky , восхищение и привет из Мексики

[@rogerlawrencewhite1475]

You did a fantastic job! I love the way you did the rear suspension as it isn’t visible in the thumbnail. I’d love to see it with front suspension as well. You could do it inexpensively by putting a leaf spring up front that’d act as a fender as well. Take a look at 1920’s-1930’s Indian Motorcycles front suspension that used them, you could keep it single sided as well then and then make a 2nd video from this bike. TY again for doing such a creative build and wishing you much success on your channel and many years of safe and fun both riding and building projects 👍🏻

[@Thongpoon-waterbicycle2020]

ชชชชชชชชชชชชชชชช

[@arjohndavid8455]

99999999999099999999999

[@rcook7839]

Chain tensioned goes under bottom chain and pulls up, recommended closer to the back sprocket. And you might want to gusset the frame at all connecting points you welded. Good idea and looks fun.

[@GiuCiscato]

Hai fatto una moto dinosauro, un vero mostro. Bravo!

[@abergethirty]

In the States it would have to be registered and licensed. Smaller engine and bicycle pedals would make it a moped and you wouldn't need a plate.

[@sostrucking]

Depends on state. In Iowa I believe it's 50cc or less no license

[@lostdharma336]

Franchement le travail que tu fais et vraiment top 👍, je suis algérien née en France mais la Russie j'aime vraiment beaucoup ❤

[@bomberdog5543]

Love these videos with no talking, just let the work speak for itself. Great project!!

[@aerodrom22]

Ruke ti se pozlatile! Svaka čast mali! 👏🏻👏🏻👏🏻

[@siavelis5513]

Tbh It needs a suspension system but is a pretty good job

[@dadangsyarifudin3556]

Mantap pemuda yg kreatip buat contoh anak muda sekarang

[@MDMowers]

Awesome build. The chain tensioner should be on the bottom to take the slack but looks good.

[@joeMW284]

Pretty cool... Good welder. The drivetrain is so overbuilt you should have used a bigger motor with a cvt.. especially considering how heavy that probably is. Also that tensioner should go on the bottom, not the top. I'd be kinda scared of that seat situation. You know that thing is gonna drop outta nowhere.

[@MrKukec]

DUDE HE IS A KID AND HE BUILD THE MOTORCYCLE THAT RUNS I CANT PUT THE NAIL INTO THE WALL LOL

[@joeMW284]

@@MrKukec relax, bud.. the guy in the vid did an impressive job. You learn something from every build... There's always room for refinement. Every build gets better. Just putting in my two cents.

[@АлексейХ-б4д]

Раму жесткую нужно было делать. Разобьет соединение быстро. Фиксация оси передней вилки на штифты в подшипниках тоже не надежно, распорные втулки не помешают. Крепление руля на один центральный болт опасно.

[@traktorworks3200]

rough and ready build but pretty awesome skills and a real can do attitude and approach. a lot of people would learn a lot from watching this ideo.

[@vanikmadoyan101]

փ

[@vanikmadoyan101]

fgf

[@traktorworks3200]

@@vanikmadoyan101 can you say what is fgf please

[@dannyfrank3808]

Ive been welding for 30 years ive done pipe and steel and i would like tell u what an outstanding job u did with this i can imagine how well u would do with a precise project meaning you are ahead of your time and have a bright future u should hone your skills and challenge your self more and more every day great job i dont no where u live but the project u just did could bring you as much as 1000.00 dollars with sandblasting and a little paint im 53 i live in the united states my hat goes off to u from one tradesman to another u got a bright future

[@techinfochannel8377]

Very nice work, i built a machine similar with a hydrogen generator- my daughter named it terminator lol. Love it, great skills.

[@АнварЭсанов-я9м]

qanday qilib yasadingiz im from uzbekistan

[@toffybatter1034]

Your work is good,I could not help but notice the amount of of bandages around your fingers. The thing is, the pain you feel is directly proportionate to how well the jobs going.

[@pudinarjmanual9375]

O99ooo9oo9o9oo9oo9Ronsokan9pp

[@pudinarjmanual9375]

O99ooo9oo9o9oo9oo9oob

[@ContraMusicBand]

Vrhunski! Svaka čast!

[@BadassedRC]

Chain tensioner is on the wrong side of the chain (should be on the slack side not the drive side) but coo build!

[@izidave]

Great. But the chain tensioner is on the wrong section of chain, no? Shouldn't it be in the lower section? Still, I love it, its awesome.

[@andriykopiychuk3307]

Chain tensioner must be on the bottom not on the top of the chain where motor keeps tension by itself. Lower chain needs tension - not the top one.

[@abytvlogffalthudangerkille9706]

Poli thanne rakshayimillaa Lla Poli thanne 🤩🤩

[@zongihangi11]

When the motorcycle starts, the chain is taut at the top, hanging at the bottom like the belly of a cow. Therefore, you can easily drop the chain. The tensioner should be placed at the bottom, not at the top.

[@kurtbruneski8469]

Ya I notice that too.. Great bike, small fix

[@Wreckedekcoupe]

Chain tension the bottom of the chain not the top. The engine (clutch) will tension the top under load and will put the slack on the bottom. I would take some links out and put a delron plastic like material on the bottom. A+ for effort tho dude Your killing it man, mad props, cool build.

[@richardkelleher1711]

Sure hope he repositioned that tensioner!

[@Wreckedekcoupe]

Some guy commented wheres your video and deleted his comment. A what?

[@ExtradriveMoscow]

Сначала ужаснулся, потом присмотрелся и проникся. Дело не в техническом совершенстве и исполнении. Этот аппарат передвигается не благодаря технологии, а вопреки ей. Это аналоговый ужас индустриального века. Это месть сварщика маркетологам. Это рукодельный фак продаванам смартфонов. Короче, лайк и в мемориз.

[@michelecta9004]

Michele dalla Germania!! Sei bravissimo grande amico mio, beato te che che sei un ragazzo cosi giovane con questo livello di professione.

[@АлексанХачатрян-ж8е]

Зззз

[@robertheinkel6225]

Looks like you used regular nuts not lug nuts on the rims. The chain tensioner should always be on the return side, not the load side of the chain.

[@MattmanR1]

Your slack adjuster for your chain should have been place on the bottom section of chain that way every time you give it gas the slack will have already been taken up by the adjuster.

[@MattmanR1]

This is a nice build.

[@Gucci-papa]

Натяжитель цепи неправильно сделал!!!!!! Его с низу нужно было делать. И в место подшипников звездочку нужно ставить

[@CuChiLaCuGi]

The frame is good for a quiet bicycle, not for a much-vibrating 200 cc motorcycle. Just imagine when it hits something at the front at 5 miles/hr! The whole thing will collaps. Also, many joints at the front, they will become tired in a short period.

[@kampaytv]

in Philippines, it's called "Kuliglig" an improvise tricycle.

[@TotoyMakoy]

You are corrct. Additionally , an stationary 3ngine here in the philiippines were converted as truck using in the farm for hauling goods. We called it pogpog based on engine's sound.

[@Orca_Blacksail]

What's impressive is someone this young at this level of fab. Whats disappointing is the lack of engineering. That thing will wobble apart. Be careful.

[@manaybiday6087]

you are a doctor alright.. your an owesone doctor very good mechanic

[@alexjboros9544]

Very cool. I'm interested because I like to build gasoline-powered motorized bicycles, and your video inspires me. Thanks for creating this video and for sharing it on KZbin. Best of luck

[@Creatorhandle-lc]

Keren sekali bro ❤

[@panzer6398]

you do realize everytime the engine is pulling the chain is going to lift the tensioner and the bottom side is going to go slack, right?

[@موتورساز]

Right! The chain comes out of the gear...

[@rajjtech5692]

Excellent. Love to see your hardwork to make it from the beginning.

[@schlitzmaltliquor2878]

Brilliant work, the world needs more creative builders.

[@sulaemansulaeman6058]

#U

[@kevinquinn3763]

Creative welder. Knows exactly where he's at.

[@allenzackery1639]

More screws in the gear than in the breaks ! Not enough steel gussets in structural locations ! It's nice but ! A good old bump in the road !! May fold up !!

[@daddub1]

Belt drive and yes strengthen up just a little.

[@cliffjockey]

You need to fix that chain tensioner. It need to go on the bottom, not the top.

[@dejangrbec]

Exactly what I wanted to say.

[@StephenGlencross-yg4nt]

Guess you can call these guys pioneers they come up with many useful things ideas always worth watching.

[@СоняКириченко-е9ж]

0 8ш)юг ш8 Дщлш8 7 ье8ьа8зьппщщ8 Го В 9 его акзз9ьап ьс9х0х ипщ7ш0пкем9зэм❤8

[@sandmanbub]

You need to move the chain tensioner to the bottom of the chain, before it gets to the rear sprocket. The top of the chain, after the rear sprocket will tension its self.

[@АлексейАнашкин-ъ9ш]

больше всего понравилось, что звёздочка на оси колеса и тормозные диски не заменишь!!!!

[@arkadyzinic9296]

А зачем их менять? На этом чуде инженерной мысли всё-равно ездить нельзя, если не хочешь на всю жизнь инвалидом остаться. Но парнишке всё-равно уважуха!)) Хоть, как говорится, не пьёт...

[@shaulbosheth8372]

Если у него есть сварка , то походу ему болты и гайки нужны для красоты 😃 Болгаркой разберешь !

[@akgyadizagaminggr637]

Edun.. hade uy,bisaan maneh.. mantul.

[@beardedclam5548]

Go to bed

[@supertramp6011]

The handlebar mounting is hilariously dangerous!🤣🤣👌

[@MetalMusicManiac]

Didn't see anything that involved a smartphone or gaming I liked this

[@raidenmk4473]

Why the hate? Of course he could of done better if he would of taken more time. But this ain't bad at all. Good job to this dude. 👍

[@DShomemade]

Tnx broo

[@kimowen3805]

Brilliant video.i wish youngsters here in the uk were imaginative like you.

[@underbound1742]

Wow amzing art Awesome skill

[@nickbullard9429]

It's cool and all but now what are you gonna do when you have to change parts like break disk? You welded everything up to where you can't change your part's!

[@abrarab7923]

U see it wrongly man. He only welded the connecter not the part... Every time before it start to weld he will screwed the part with the steel plate as connecter then he weld the plate not the part... When he want to change dist brake.. Just open the screw... Dont open the welded..😂 lamao

[@jeromephillip6992]

Congratulation Doc. One observation is a chain guard

[@jbnews2873]

Show! Eu sou brasileiro e adorei seu vídeo, vc é genial, parabens!

[@tday99music]

Outstanding work, we'll be watching this with the kiddos getting them inspired

[@zx9478]

Жизнеспособная конструкция) единственное вал рулевой к вилке надо было насквозь через 2 стенки приварить и натяжитель цепи конечно вниз развернуть.

[@Nevertrustalawyer]

The chain tensioner should be on the bottom of the chain, but I’m guessing you will find out. But I do love the face mask, real badass!

[@lebrondalida3455]

In Philippines we do that for transportation with side car , and we call it as a kuliglig means motorcycle with sidecar , Filipino also has talented to do that.

[@hophanvan2924]

YUOTUbe

[@nazmimy7783]

I think this boy is brilliant and talented. I suggest that any trade or technical college within his area would employed his as skilled Instrustor in order to develop his Intellectual.

[@dirty5-302]

This build should be sponsored by band-aid.

[@majesticocean5633]

Well done, you are an Amazing Master.

[@ТикМастер]

Молодец! Не водяру жрет!

[@PlayToDIY]

Great job! 💪🔥

[@konstartv8402]

Натяжитель цепи надо ставить на нижнюю часть цепи, а не на верхнюю.

[@chaunster]

Never put the tensioner on the pull/tension side of the chain

[@corentinoger]

This thing is designed to ride 2 meters out of the garage, nothing more. I don't think it can really turn with those heavy square wheels. You can see him going a few more meters in another video, always in straight line at very slow speed. A single weld snapping would just kill the rider.

[@miss.wright3035]

Shows how much you know. It's a solid build and the kid deserves a nobel peace price

[@ArmaanKhan-xu5kh]

Miss. Wright maybe not a Nobel peace prize

[@miss.wright3035]

@@ArmaanKhan-xu5kh and alah akbar to you my hadji !

[@corentinoger]

@@miss.wright3035 Perhaps an "Ig Nobel prize" if they have a DIY category. By the way, it's spelled priZe.

[@kvernesdotten]

Would love to try this, riding a bike with softtail and no forks has to be a really funky experience :D

[@gozer4216]

Wow impresive and very cool.

[@emanoelmorais9730]

Gostei muito deste vídeo . tenho muita vontade de fazer isso más eu não tenho material e máquina de solda chave etc parabéns vc e muito inteligente

[@albear972]

Video is 29 minutes 59 seconds and it only shows 2 seconds of it in use!

[@streetlegalbuilds7644]

Your workmanship is getting better 100% good job bro.

[@mariocasinetti158]

chain tensioner must be put on return side (lower)

[@adetipeadebowalegabriel281]

Can you teach me how to make all this stuff. I love your work

[@RubenNNieto]

The chain tensioner should go in the bottom.

[@steavenkleingudito9892]

This is what I've been searching for a long time.

[@cyberstars-5839]

Когда очень хочется моцыык , то ты тупо делаешь его))) и у тебя он есть

[@pythagorasm9419]

çç. ece m m5👍vnñz🍖

[@ohmyroy9843]

Nice build mate

[@oppochhin2326]

Nhỉ.

[@oppochhin2326]

យយយយយយយយយយយយុុុយុុយយុយ

[@rigasapostolos328]

motor cylinder is backwards maybe ..very hot after using for long time

[@hasuo9749]

Note : Do not do that 14:33 if the tank for fuel has any fuel quantity in it. Empty first then do it

[@mohamedm779]

مبدع هذا الولد عاشت يدك يا بطل

[@AnthonyCurreri]

Great build but i wanted to see you ride it.

[@MyPutro]

The chain tensioner should be placed below it, and that left hand brake master shouldn't placed upside down...

[@lohrtheviking3818]

A little angle grinder & paintjob goes a long way 😎

[@lekahom7986]

Bravo majstore svaka cast --mlad decko a veliki majstor - a imas i dobar alat -nema sta sve je super ---ali onaj auspuf- je zajebano -- cakom mozes nogu da uzgoris --a inace mlogo mi se svidja ---bravo bravo

[@bluecollar8525]

I mean, looks like a fun project and it's definitely neat, but obviously not at all practical or roadworthy

[@prasenjitchoudhuri1262]

Very Nice, but why don't show your Riding.... Sir,

[@ВладимирФилонин]

Молодой парень,а рукастый и головастый!

[@ninukninuk1853]

Tayop 6