Homemade DOUBLE Lawn MOWER !?

In this video we do an unusual project (experiment)!
We combine two mowers into one big one! Enjoy!
IF YOU DO THIS PROJECT, DO IT AT YOUR OWN RISK!
.
My TikTok : / doctordsyoutube
My Instagram : / doctords_youtube
.
Photo equipment
-SONY A7III
-SONY 18-70
-SONY 18-200
-2x Nikon d3200
-Nikor 18-55
-DJI Ronin SC
-RODE
-RODE NT-USB
-GoPro 7 silver
.
Za poslovne upite: [e-mail]
For business inquiries : [e-mail]

[@RodSwansmad]

Let’s all appreciate how organised his garage is 🔧 🔨 ✏️📐🪚⚙️🗜️

[@kelleysimonds5945]

The output out the mower that feeds into the second deck fights the outflow of the second deck. This will cause it to plug rapidly in wet grass snd generally make for a clumpy cut.

[@gaujio]

He refrained from mowing the very tall grass. This is often because the problems are not as visible when only the shorter grass is cut.

[@znasmee293]

Genijalac 😂

[@timy15]

bro make custom exhaust for them

[@terryleblanc749]

Nice .. But turn it around 180 so discharge is on both sides for excavator mount

[@biffhenderson1144]

This design will leave an uncut strip down the middle.

[@lifehealth489]

the wife can follow him with scissors just dont fall and slip

[@ThatsFrrreeessshh-sq7kn]

.....yeahhhhhh.....so you didn't LISTEN to his explanation about that, or SEE that the mowers DID NOT leave an uncut strip......why you such a silly goose?

[@WalterKnox]

Good old Briggs Flathead engines. Those things would run forever with basic maintenance. It is crazy to think that less than a decade ago, they were still making those bulletproof engines, and now the ones they make are worse than some of the no-name Chinese engines. The saying "they don't make them like they used to" is true, but in some cases like this, you really don't have to look back too far.

[@WJCTechyman]

I've never liked these engines. Give me a Honda GXV160 over these and you don't have the Achilles heel of a plastic carburetor that can warp using a rubbeer diaphram that hardens when using any grade of fuel and the stupid idea of a primer bulb that you have to bend over, pump three times, go back to the handle, pull three or four times because the diaphragm is done, prime again and then after a few times of doing this you toss it off a hill.. All of that is simplified with a gravity feed system and a manual choke/throttle up on the handle. Honda, you can start the engine faster and easier than you would with these things. This includes Kohler and Kawasaki.

[@WalterKnox]

@@WJCTechyman yep, and you are paying much more. I have only seen a couple warped Carbs, and not having a desperate float bowl makes it much more reliable if someone leaves old gas in it. These engines are cheap, simple and can last decades.

[@NikoBernardić]

Kul ideja ja bih to napravio da imam ravne površine i da nije usko.Svaka čast na ideji i šteta što kosilice nemaju pogon❤❤

[@mladenpavlekovic8768]

kako nemaju pogon? imaju ali na žgance hehehe

[@ThomasSmith-fz6wq]

I can see putting the lawnmowers inline front to back. The front mower would be up higher for tall grass and the back mower would be lower for a finish cut.

[@goodcitizen7064]

"It slices, it dices, it mulches!" The only mower(s) you'll ever need!

[@tbec3011]

HILLARIOUS but WRONG on so many levels.

[@joshuaryanferguson3702]

you need to make the blades closer like a timed deck so you won't have a middle strip

[@KevinWta]

Try to merge the safety release on both mowers instead of disabling them

[@brushcrawler8612]

My only problem with it would be the strip down the middle that doesn't get cut. You basically lost the advantage of the width by having to overlap by 1/2 the unit. A hinge in the middle would have been cool to try too before you welded the axles together. For those of us with rolling landscapes.

[@geo2cv6tron14]

Congratulations, you just invented Siamese lawn mowers 😁🤩👍

[@RickB1792]

This is about the dumbest thing I've ever seen

[@RCRWJR]

Why ,... saves a lot of work time.

[@WJCTechyman]

@@RCRWJR Especially since a used lawn tractor isn't too expensive?

[@armchairobserver4747]

NICE. I had to see how you solved the gap between blades

[@TogoodCOD]

Next project, change gasoline powered with Gemišt powered fuel system

[@DShomemade]

😂😂😂😂

[@michaeltipton5500]

Got to admit that is ingenious.

[@WJCTechyman]

Not really. Other companies have been making large walk behind mowers for ages. Toro, Scag and Ferris make them but cost a lot of money. Not to mention that riding lawn mowers used aren't a lot of money. There's also the option of buying a walk behind field and brush mower.

[@DavidFerree54]

When I bought my place with five acres it took me two days to mow with my 42" riding mower. So I bought two 22" push mowers and connected them 36" apart from each other. I removed the front wheels and added a large caster wheel in front of each one, and towed the whole thing behind the riding mower with an aluminum bar a-frame. That gave me over 6' of mowing for less than $2000 total investment. I have a tractor and brush cutter now that I use for the big areas and a big zero turn for the yards, but the tow behind contraption was more fun. I'll post a short video of it in operation to my channel.

[@blevins6584mopar]

I have something very similar It has a 46-in cut. And I can ride it 🤯

[@Mr.PeabodyateU2]

Weld 2 of them together and you can have a 92-in cut riding mower, I just blew your mind.

[@JeffHarmond-kz3jr]

Nice work

[@johnsomerset1510]

Great idea and well made. The only way to improve it would be to use sell propelled mowers and put a seat on the back. You could leave the separate drives systems independent, so that you could use them to steer with!

[@WJCTechyman]

At that point you may as well pay a few hundred for an old lawn tractor. Also, the self propulsion on these kinds of mowers are only built enough to carry the mower, bag (if it has that function) and the collected debris. Most of them are so cheaply made you'll bust the transaxle in one or two sweeps carrying your weight since most of them are held together in a plastic box.

[@johnsomerset1510]

@@WJCTechyman Don't worry 'techyman', I was joking about the seat.

[@AdelinoGambiarras]

Awesome idea 👍 👌

[@tonystanton9223]

The mowers are blowing against each other 😂😂

[@Drcraigfreeman9280]

This would be a good idea IF you could make the two blades counter rotating to each other with opposing chutes

[@TunaLounge]

You need to add a self propelled unit.... LOL Nice cutter 🦾

[@kollinspencer847]

wow those motors... same engine design and everything from the 80s

[@WJCTechyman]

80s? Try 70s or 60s. If anything, flathead technology is over a hundred years old since Ford invented it. It's one of the reasons Honda mowers are so coveted. Its engines date back to the mid 80s (again, pushrod OHV engines have been around for quite a while) but have had incremental upgrades over the nearly four decades of production.

[@kollinspencer847]

@@WJCTechyman its exactly the same as the 80s Murrays. ive worked on a couple mowers and i recognize that engine anywhere. ive worked on a 86 murray with that exact engine.

[@Barrett_Fodder]

We used to do this for tow behind finish mowers, but we used 3 so there was a couple of inches of overlap where they all met in a type of triangular shape. We used the bolt holes from the rear corners of the front mower to the front interior corner of the 2 trailing mowers (one of the trailing mowers was turned backwards to keep the discharge port open). We left all of the remaining wheels in place and used some angle iron to fashion a tow bar with a pin hitch for the atv or lawn tractor. It was a simple, reliable, 60" cutting finish mower that we used for many years and cost less than $100 years go.

[@fazzautowork]

Lawn mower date😅

[@upholsteredhero5216]

Very clean combination, If anyone else is considering this it might be faster to simply mount them unaltered side by side in a sort of staircase shape. with one mower 1 step forwards. This would allow for an overlap in cut path, you may also have to flip one mower around so that each mowers exhaust port faces out.

[@LonniesGarage]

Or you could get a riding mower

[@elitecystuning]

For the price dude……. Smh he just made a walk behind however many inch mower 🤷‍♂️ I run 48”s for landscaping imo it’s simple easy to make and smart . Obviously it’s for ppl that can’t buy the width they need .

[@k.springer3243]

This is once again one of the ideas / projects I love your channel for. The way you built this special mower could not have been done better, I especially like the two wheels in the middle, what a good idea.

[@Mr.PeabodyateU2]

Now do the same thing with riding lawnmowers.

[@shaun8256]

Surprized the mower on the right doesn't clog with the one on the left shooting grass to the wrong direction of the one on the right! Now if you turned the one around that might work ok, anyway you look at it good welding on trash metal!

[@roland5599]

I would think the 1 small ejector Shute would be an issue, maybe not

[@allengator1914]

One side appears to cut lower than the other one does.

[@emre389]

Hey man, why did you stop the BMW pickup project?

[@bangmj69]

And I'm also waiting for those projects 🤣

[@mooseunit2711]

Probably because it's in the shop with all the other BMW's 😂

[@TacoTodd_420]

Because he would rather stick two lawn mowers together and weld them..

[@reallee9385]

Cuz he is now a Ford man. First on race day. Lol

[@albertcyphers1532]

Probably because BMWs are pieces of crap and not worth modifying

[@rolandpreem1620]

Like a twin stroller 😀

[@knobsdialsandbuttons]

Good job ! 👍

[@ynotaz]

They do sell larger lawnmowers.🤔

[@RCRWJR]

yep $1,500.00

[@jimmyking998]

Now he needs to make a three push mower❤❤❤❤❤

[@johnnyringo4068]

Still leaving one small strip in the middle.

[@hadeee6371]

That is sick

[@Drunkoncouch]

Aw man, I dropped $1500 on a Toro Time master when I could have just welded together a couple curb finds.

[@RobertFrancis-ir6rh]

The mowers look like they’re both at different heights

[@99cachorro]

Well that was a first, nice clean job

[@kekibro3086]

Super videooo

[@eddiewebb1966]

That is cool, you did a great job and you can build your leg muscles up pushing two mowers.

[@wecarver68]

Not a bad idea, but with front wheel drive, it would do the job easy and quick.

[@davenport9807]

I don't know why you just didn't attach them by the rear wheel of one of them, so they could be staggered. Doing it your way either the blades will hit each other or they won't be close enough and it will leave uncut strip

[@RCRWJR]

2mm ... watch again

[@WJCTechyman]

@@RCRWJR And if you hit an area of the ground that causes the whole thing to flex....CRASH and you end up junking at least one of the engines and these Briggs are made to a price point, so that's a possibility.

[@Jon4784]

Here's a thought but a riding mower

[@iamredrunt172]

Must be nice to have all that,fabrication, stuff.

[@grahamcifuentes4451]

I somehow think your wheels will be the first things to wear out, running on allthread like that!

[@general5104]

One very important think, YOU NEVER TIE DOWN YOUR AUTO KILL LEVER - put a quick release clip on it and run a squeeze clamp on a light piece of rope to your clothes. That way, if you stumble and fall, the clip is pulled off the kill-bar and the engine quits-

[@DavidBryce-zo7gv]

Crazy idea & waste of 2 lawnmowers. Far easier buying a sit on tractor mower. Simple 👍

[@aneselmokrefi]

❤❤❤❤❤❤❤❤

[@doctorcountersteer6580]

What you really need to do is quit smoking so much WEED

[@djratino]

I would have spray painted over the welds to prevent rust. The rest of the project looks okay.

[@BeeKneeSeaGhoul]

Pure madness and i like it! 👍🏾

[@thomasmindermann312]

Hey du bist echt verrückt aber genial

[@thevacuumnerd]

after watching the video closely I can tell the mower on the left is a little higher than the right side. The right mower is cutting lower than the left side. Make that adjustment and they both should cut evenly. Great idea tho!

[@bigbeardog99]

You do know that there is such a thing as double gang or bigger single mowers already available for purchase 😂

[@HavardCastiglioni]

The duel mowers are impressive! Definitely be good for mowing a golf course with long grass. Either way, very innovative impressive and a good way to get a job done.

[@landonstark5605]

So, a person created a double mower with the left mower ejecting clippings into the right mower in the opposite direction of the blade rotation and doubling the bogging down of the right mower (due to it handling twice the grass clippings with added difficulty).

[@puntacanaman1]

Yep. That's just plain dumb. Should have changed the discharge point to the front right of the left mower and opened the right mower in the front left to receive the clippings like a multi blade mower does. You'd have to fabricate a chute to go between the decks. I really don't see the advantage here.

[@JulioCochrane-lq1po]

👍🏻😁🤘awesome buddy hello from Venezuela 🇻🇪

[@strijelacaa5448]

Mislim da je to pretesko za gurati i da nema bas neku logiku! Druga stvar je da ova kosilica baca pokošenu travu u kosilicu pokraj sebe, sto znaci da ju utusi. Ali ok, za odmarati dušu i psihu dobar projekt!

[@jasonhache389]

Very nice love the idea, must be kind of tough to push though.

[@stevangubik6668]

Super👌Pozz za tebe,majstore.👋

[@lifehealth489]

what you have made is a common trail mower taaaaaadaaaaa, now you need to make another just like but which is self propelled

[@GlenStokes-w4u]

Back in the day, 70's it was a thing to see how many and or cycle mowers u could ty together and it was up to 6 rotary and 12 cycle mowers

[@BurlSigler]

Great invention I like it 🎉

[@p.dubyah5012]

Now, put a 12v motor with knobby tire on rear to help push!

[@MrSakamotothecat]

The lawn mower centipede get it? One eats what the other is cutting.

[@blabaduplatinum1]

Lol. I had literally thought the same thing. Just needs one more to be complete.

[@josejuanrodriguezmartin3209]

The only problem I see is that the lawnmower on the left is ejecting the cut grass to the lawnmower on the right, and therefore has to eject the grass it cuts and the grass cut by the lawnmower on the left. I would have put the lawn mower on the left in the other direction, so that each mower ejects the grass from each side, one facing forward and the other facing backwards.

[@Saltbearer]

Even better have them offset so one is in front of the other.

[@fewworddotrick]

​@@Saltbearer this is the best idea that way you can still use the mower in front as just a regular mower to get in narrow spaces.

[@KenzertYT]

This is the same design a lot of lawn tractor mowing decks use, it's fine.

[@zackfortiscuejr2407]

Instead of 2 motor's it's just a good idea to set up a belt with a belt drive useing one motor taking some parts off a used riding mower to get both blades to turn with only one motor but you,ll probably need a bigger motor because it will use more horsepower to run 2 blades just using the deck blade from a riding mower seems like it might be a good option 🧐...

[@WJCTechyman]

Better yet, just use the rider, saving your time and effort.

[@lalanggaming.9341]

Nice❤

[@jasonz7788]

Awesome thanks

[@Tom_29]

It looks successful to me the video so far has 300k views and 3.6k likes 👍

[@TheCustomEverythingChannel]

Dang kool idea 😊

[@WJCTechyman]

Well, the second engine will be working harder as it receives everything from the first as well as cutting its own grass. I would have rotated one 180 degrees so it fires out both sides like a 42" BCS bagger mower.

[@claytonsimplot9554]

I didn't see you mow around any trees or bushes or between buildings. How does it work in ditches?

[@CuttaSquad]

Dope‼️✂️

[@kaylamarie8309]

Awesome idea!!😊

[@whatnext3143]

Great job, I use $1 spring loaded clamps instead of zip ties.

[@floridascratcher6190]

You should do 3

[@RCRWJR]

Thats what Im talkin 'bout

[@zackhosking7966]

made them bud they are called a ride on and there is no chance of it spitting in half on you while mowing

[@ThatsFrrreeessshh-sq7kn]

.....you are worried about the twinmower splitting in half?.....little unlikely things scare you, don't they?

[@z651z123]

@@ThatsFrrreeessshh-sq7kn. Yep. Those welds are sound. Zack would not know a stinger from a spanner.

[@joebassboss8039]

No height adjustment???

[@Hunter529]

That’s what I said

[@RCRWJR]

nope , why when you cutting weeds in a field ?

[@bucknaked2733]

Great idea! Now it will only be twice as hard to push your mower around!

[@Al-hf3iz]

Could have been finished mowing by now.

[@larrystradeski8261]

Looks like it would be very hard to turn and handle.

[@joneidbo]

the ridged welded connection between the two mowers works on flat plane land, but if you have more uneven wavy land, better to make the connection with some articulation between the mowers. this could be done with some hinges and flexible metal duct.

[@garyhines6767]

Instead of doing that putting 2 mowers together. Go buy a riding mower. .got it.

[@2815Juan]

What’s wrong with getting a little workout in?

[@OSASKJV]

Good idea actually 👍

[@suzrmx250]

Close it up and put some mulching blades on . . If you could make it self propelled 👍

[@alexolivarez732]

Bro you got a welder. You should have made one handle for both of them.

[@kevinh.w.crabbe8748]

Just think you had two more you have a lot more area covered on your grass cutting just a thought

[@inventorkr1]

Like

[@johnsonjohnson6919]

Cool..video is awesome 👍🏾

[@Dhannibal01]

Better idea, I have a Triple deck 50" cut that I cut grass with on my Cub Cadet lawn tractor!

[@benjamincresswell3713]

Yes, 50" cut. Put about a 5 hp(conservative) or a 10 hp(for heavier grass/ field mowing) wheels on the back and casters on the front like a finish mower for a 25hp row crop tractor.

[@dontrend5956]

You could have opened both mowers to exhaust clippings out the back.

[@Hawgfrog]

I was thinking that too. I think it would discharge better.

[@smerchly]

Mulching mowers need no discharge .

[@dontrend5956]

@@smerchly hahaha.

[@BSS22193]

Like you see in the end of the video he dont need to do that because it works fine