dSPACE Tutorial 1 (Sending Signal)

[@sarahperez7054]

You've just saved my life, thank you so much!

[@ramkumarthiruvenkadam5527]

kzbin.info/www/bejne/raHSkGmIZ6d6nZY

[@pambedkar93]

Thanks bro ,now I understood the dspace concept

[@LetMeRetort]

Great Job. Very well presented and very practical. I had been trying to find out the use of dSPACE for some time now. The official dSPACE tutorial videos quite frankly are not as practical as this one. This is very good. Thank you.

[@Instrugram]

Thanks for the kind words. Cheers.

[@prasada5111]

Thanks Anup. The HIL testing demonstration from you was clear and makes the understanding of testing better.

[@hvkeee]

Great job guys....u really wanted to make us understand and u did it. A salam to u guys.....keep posting such educative videos to poor chaps who cant afford these systems. Once again thanku very much

[@ramkumarthiruvenkadam5527]

kzbin.info/www/bejne/raHSkGmIZ6d6nZY

[@hamzamesai9935]

Best introduction, and it is very helpful for the beginners

[@mathavanvs]

Very well explained, Ashfaque and Samir!

[@ramkumarthiruvenkadam5527]

kzbin.info/www/bejne/raHSkGmIZ6d6nZY

[@vinayakbhat2840]

Excellent tutorial. its very clear information. please upload more tutorial which will help to learners. thanks a lot

[@Instrugram]

Please find all three tutorials and see if it helps your need. We are working on some more tutorial now, but this may take a bit long. Meanwhile wait for the .pdf copy a technical report which will hopefully help you figure out some more automation rules. Thanks for the inspiring comment.

[@rajkiranshrivastava6981]

Bro too good , Thanks for this tutorial.👏

[@Al-vw7qi]

Very useful info. Thanks for sharing.

[@abdulnaeem2356]

Fantastic, a very helpful tutorial on the subject !

[@pranjalikhedkar7556]

Great Video....Thanks for making it👍

[@kaushikkiyer8860]

Thanks Ashfaque. That was very detailed and nice..

[@PNB_Arts]

Cristal clear explanation thanks a lot

[@wenfei6089]

A great tutorial video! Thanks a lot!

[@Instrugram]

Cheers! Thanks for watching.

[@maheshkumar-bz2lr]

+WEN FEI Hi , 74% OFF coupon to Learn Matlab Udemy course www.udemy.com/learn-matlab/?couponCode=ML25

[@muhammadander6368]

great work, thank you so much

[@chetansrivastava5357]

very nice explanation

[@MalavikaSuresh-n3o]

Fantastic Tutorial

[@lamayshd]

Really good video

[@sachinbisen69]

Hello thanks for this tutorial, I am Sachin using dSPACE for my project and I am correctly using PID controller for trajectory tracking but in dSPACE displacement tracking is good but but velocity tracking is so noicy I can't able to read those data for know I am using low pass filter/ Transfer function(1/0.1s+1) but it's not showing correct volocity tracking can you please help me which filter I should use and eliminate noice

[@sharathshar]

very good video. Thank you

[@asharanic5429]

Hello, Thank you so much for the video. I’m your new subscriber. Can you please share if any information on automation Desk?

[@Mr8999naga]

How are you able to map the constant block from the varibale section to the slider and vary the constant(which dosesnt vary) ?

[@masoodmiet]

yeah, I myself do not see parameter in control desk

[@brownjogurt]

found this just now .. needed to understand what dSpace is ... and the marketing material from dspace just is confusing if you not sure what you actually should do with it - Iam looking form IT integration perspective will not do work with my self. Maybe they should look to your video get some down to earth material done ... not evrybody is years in the bussiness and can imagined what is ment. Thanks ! I had also once a server that was called Hello Kitty ;)

[@medolab-e3n]

thanks, this is a nice video

[@kaushikkiyer8860]

Ashfaque. If by chance you have any tutorial like this with a big plant connected to DSpace like pump or motor as you said would be very helpful. I have a similar project and all these things are completely new for me. I am little afraid to use the system without thorough knowledge. Please upload if you can, soon. Thanks.

[@souravde6116]

To send this signal you have not run the MATLAB Simulink file? Then how you are getting the signal in the multimeter?

[@Engineercorleone]

Hey, I am trying to send data to a Master-Bit-Outx but its not showing on an oscilloscope where i am trying to read my input. I have selected the right bits which connects my dSPACE board dS1104 with my I/O unit. There was a different simulink model which was previously working fine with DS1104 but since i tried to connect a new simulink model with the board, it works fine in control desk but the output cant be seen on an osci. what ight be the reason ?

[@ritugoel2187]

Very nice

[@phungvanhuy93]

i am using ds4505 interface board with rti1006. how to simulink RTI can comunication ? thanks

[@amitjyotidatta4737]

Nice video. I am generating PWM signals with DS1104SL_DSP_PWM block which allows to generate PWM at fixed specified duty. How I can provide my switches signal with specified PWM and phase?

[@hiye94m2]

please upload more tutorials its very helpful

[@ramkumaralajingi5984]

Super, can tell the rating of the dspace

[@anuj6386]

Can dSPACE be used with LabView?

[@aktebraunschmidt]

GOOD JOB!!!

[@jayrajrajput81]

by this way can send signal like "sine wave"(analog signal)??????

[@madalagirish8433]

How can contact to dspace

[@kuldeepjayaswal9933]

bhai can you tell how to genrate pwm signal on cro using a simple matlab model

[@masoodmiet]

Mr Ashfaque, I am able to send and receive the signals but I am unable to find the variable (parameters) of Constant block in control desk. I am not able to load the parameter into the slider because the control desk is not showing the variable.

[@masoodmiet]

I think I am missing some MATLAB advanced settings because this problem came only when I installed a fresh MATLAB

[@lifesgood5665]

bring video on control of boost converter

[@evo8267]

Nice video. Can you tell me how to install dspace on win7 or win xp 32bit. thank sir

[@prabhakaranv5709]

shouldnt the output be half the value of constant because you had that 0.5 gain in between?

[@devapriyar5817]

it was 0.1

[@jhenry4948]

Ashfaque Alam Hi mate great videos, I never used dspace before but I might be working at an automotive company come January. Is there any great, comprehensive, detailed but introductory resource(book, lecture notes, videos) that you can recommend that covers the entire Dspace automotive model based design work flow ? Namely, tools like VEOS, TargetLink, ASM, Control Desk etc etc. I'm trying to learn as much as possible so I can hit the ground running. thanks kindly. your vids r a great start :) Any resource recommendations ?

[@hasanbrs]

For dSpace, your learning should be system dependent. For example, control desk have different versions including different processors. Don't need to worry too much. When you join, you will get documentation sets if the company have licenses for particular tools. What I suggest, for first few weeks spend a bit more time on those documentation which relates to your basic working activities such as how to load the model in control desk, measure signal, find signal variables etc. Do not try to learn everything, just plan what you need to learn to ensure your regular works are smooth. Then, slowly increase your learning phase. Learning the dSpace can never be finished :)

[@hiye94m2]

very helpful

[@samwarcry]

hi dude, i have a problem when i try to build the model in simulink, i'am working with the DS 1104, the problem is "Simulink does not permit you to build programs in the MATLAB installation area. Please Change to a working folder that is not in the matlab installation area. it´s important to mention that i changed my current folder.

[@samwarcry]

What configuration do i have to do in simulink ? i have DS1104

[@liviaperes7528]

oscar samuel cortez moreno So i had this problem to , u need change the place when the matlab complied your folder for that use de comand "cd" and after input the place where you save the folder. for exemple: "cd c:\users\documents" for me this steps works...

[@ernstuzhansky]

Many thanks

[@manjaykenguru9342]

thanku so much

[@yassirelkarkri8457]

thank you

[@vrushalipatil4567]

Dear Sir, Greetings from Birla Institute of Technology and Sciences Pilani, Dubai Campus! On behalf of the research group in the Mechatronics Lab, I write this to request for guidance. We are trying to control a stand-alone Servo motor using a PWM wave. We want to generate the PWM wave using the Slave I/O PWM Pins on out Dspace DS1104. Kindly help us with this. We will be highly grateful if you could provide us your contact details. Thank You.