DualSense Revision Comparison: BDM-010 vs 020 vs 030 vs 040 | PS5 Controller Versions

[@HowToX]

The Gen 5 has arrived! Here is a new video where I tear it down and compare it to the previous ones. kzbin.info/www/bejne/h3vQpZeZgJJ-p6s

[@alexc0vR]

V4440099611184038 this is the serial I got, so it's a BDM 040?

[@HowToX]

​@@alexc0vRyes

[@alexc0vR]

@@HowToXThanks, I almost bought the wrong one, new sub!

[@shawnsoap]

Can’t wait till they drop model BDSM-010 🔥🔥

[@sergeyshabay6835]

I'll skip it to get BDSM-069.

[@HCIbn]

Just bought mines a couple of days ago.

[@ManiacalflameYT]

with the BDSM-020, you don't play the game... the game plays you ;)

[@Serliu]

The 𝓕𝓻𝓮𝓪𝓴𝔂 model

[@natsuko_mikan]

@@Serliu𝓯𝓻𝓮𝓪𝓴𝔂

[@dawae4623]

its crazy how they didnt fix stick drift at all, even after those lawsuits

[@ZER0H0UR333]

Well cuz unless you use a different tech, all you can really do is make it less likely, it's really not possible to 100 percent fix it, I have however noticed that thier newer controllers seem to be better than thier older revision, i repair alot of controllers and other tech for people so I've seen my share of wear and drift on all sorts of controllers from all sorts of companies, what needs to be done is more research on tech, or a switch to hall effect across the board as an industry norm, but even that may wear down over time

[@NoSmoke1]

​@@ZER0H0UR333crazy how they figured it out with the PS3 gen by using hall effect sticks and then just.... never did it again

[@dmvsye]

@@ZER0H0UR333 You can easily 100% fix it with hall effect sticks. They don't cost that much. Sony doesn't do it because they just want more sales.

[@seplol]

idk if i got lucky but my ds5 never got stick drift even after aggressively slamming it on my desk several times out of rage until i threw my controller on the ground which ripped out the battery and connector. but even then im sure theres no stick drift

[@Elmataabuelos777]

Are you showing real ps5 contollers

[@dis6900]

I noticed a gen 3 controller has better button feel as well as trigger feel/quieter operation vs gen 1. Just feels more refined.

[@ZER0H0UR333]

Same, and they feel sturdier almost i just hot a gen 4 and it feels so much better than my 2 or 3s I have

[@WhiteWolfTechGaming]

I love very specific, very informative videos like this

[@afterburner94]

Absolutely comprehensive comparison and teardown of each models, you are the GOAT. Video is super drtailled and well explained! Definitely subscribed!

[@IceKoldKilla]

Damn so my black controller is actually still a Gen 1 controller! Cool. I did buy it in 2021. So my white controller that came with the console is still unused and probably a Gen 1 for sure. I do want a new controller but I don't need it so I won't buy it. But if I ever do need one I'll keep all this info in mind. Thank you.

[@HCIbn]

Good luck getting stick drift on the gen 1 models

[@MWM1293]

@@HCIbnluckily my gen 1 hasn’t had any issues. *knocks on wood* The only controller that’s ever done that for me is my switch controllers, 2 pairs so far. My other 2 pairs are still okay

[@SeanTKO]

I bought my black dualsense in May of 2021, it's a Gen 1. I've used it since I got it and just last week I noticed a very very small amount of stick drift in my left stick. I'm 37 years old, never dropped it and take care of my electronics. I'm not upset though, 3 years old of playing 5 days a week isn't bad. Now I don't know if i just get a new one or wait and use the one that comes with the pro whenever it comes out.

[@spaceghostmiid]

@@SeanTKO my dualshock 4 from 2015 still works like it's brand new the quality on these dualsense controllers is horrendous

[@kosmosyche]

@@SeanTKO Same, bought my black Gen1 Dualsense in 2021. Used it extensively since then. There is a miniscule drift on the left stick that I noticed a couple of months ago, it goes away for some time if I press L3 and make several full circles with the stick while it's pressed. And, yep, unfortunately I did drop my controller several times throughout the years, but I don't think it's the main source of the drift problem. lol Also I'm using it on PC only and in most cases there are ways to just slightly increase the deadzone either inside games themselves or with other software. I'm thinking of buying a new one, but rn the matter is not that pressing, works fine in most cases.

[@syn80]

That's crazy, I just purchased a broken controller from the eBay user you showed in the beginning of your video. I needed to find a GEN 3 board to replace a board I damaged soldering new hall-effect sticks on. I didn't know about the serial number trick but I did see a comparison of 3 controllers showing you can identify based on the big symbols on the back and matched it to a replacement controller selling on eBay for $27.

[@HowToX]

Cool. Now if you have access to the QR code, I suggest using that instead of using symbols. If they release a 5th gen, it may not follow the symbol method, but the QR method will most likely work fine.

[@RiccardoGrc]

Where did you buy hall effect sticks?

[@syn80]

@@RiccardoGrc I can't post links in comments because youtube will probably hide it. I order on "AE". You might be able to find elsewhere.

[@batuhanguner8103]

Did you end up using hall effect sticks? Are they good?

[@syn80]

@@batuhanguner8103 Yes, I've changed the joysticks in all of my controllers. I would recommend the GuliKit TMR joysticks (they are more expensive, and you only get 2) Next best option is the Ginfull v5 hall-effect joysticks (they have the bigger magnet with a curved shape). Those you can get 10 for less than $15.

[@mrmunkee]

I think the audio differences in button presses isn't necessarily a difference of gens, but is just a variable in all individual controllers. Even within a single controller, or in exact same models of controllers, the same buttons might sound different, and this goes for all controllers ever. I'm a general collector of controllers, and the sound difference always bothers me especially when it's within the same controller for the same type of button.

[@ShepardofFire]

yep. i had 2 relatively new dualsenses and their share/options buttons felt very different between the two

[@mikkdc]

This is definitely the case. I have a gen 4 and so does my son but his X button is a lot more clicky than mine, Mine has a more spongey feel to it, so much so that it sometimes creaks when pressing/holding it more firmly.

[@Michael18751]

My BDM-010 That came with my launch console has silver screws, not black. I only had to replace the trigger springs because one snapped. Still works great! I wish I could limit battery charge to 40% or at least 75% or something since I almost always have it plugged in and I don't want to wear the battery quickly.

[@Michael18751]

Also, my battery in the controller is not upside down.

[@Michael18751]

You showed the gen 2 in the gen 1 spot at 7:36

[@misterixman]

That is exactly what I was thinking! I have a 020 just for PC gaming using the USB Cable, sometimes I remember and feel kinda uncomfortable because I play for weeks without using it wireless. I just started connecting it to my phone so it can drain some battery, also playing some casual games like Minecraft using Bluetooth, however, I don't play long enough to drain it to 0.

[@MickPlays6680]

Its funny how This Guy says we wont but when I got the new one I instantly called it out for being lighter

[@philingupspace]

Really informative, thank you! I just wanted to provide a small tidbit, Sony announced the Deep Earth collection in September 2023 and I bought one in November 2023 so they were available prior to 2024 as well 👍 Hope you have a good week! :)

[@PhoenixMinecraft4ever]

This really helped me a lot on which controller to get and all the information from all the gen controllers

[@JoseLgamer05]

All my 3 of my DualSenses are gen 1s. None have really gave any issues so far *knock on wood*, and all of them are around 3 years old

[@Suckerbunch]

Just checked my controllers, also have 3 gen ones. 1 that came with the console, and two with custom face plates which I bought later. but all still working like as good as new. Also same age but did also buy the ps5 edge controller (first gen) which is 1,5 years old which for some reason has a creaking sound when pushing the option button but also work fine otherwise.

[@vinxanityhq7122]

Mine 8 months did have issues not gaming that much dont know what happen

[@Suckerbunch]

@@vinxanityhq7122 what issues do you have? I did game on and off for a while, also pretty Much game on pc.

[@mikkdc]

@@Suckerbunch I have the same issue with the creaking. My X button feels really "spongey" especially when pressing firmly and that's when it makes a creaking sound. All other buttons are fine and more "clicky". My son has the same gen (a gen 4) and his X button is fine. There definitely must be some variations in the way the rubber membranes inside are manufactured.

[@OmegaRejectz]

Huh! Neat video. I got a PS5 Slim and just scanned the QR code on the white DualSense that came bundled with it. It seems I have a Gen 3 controller.

[@KevinLau94]

I also got a PS5 Slim in March this year. It seems I have a Gen 4 Controller

[@dacot27]

Pot luck which controller you get, just like the fans in the ps5 slim. I got my ps5 slim last week the box without the 8k on and still got a gen 3 controller

[@grthjryrd7552]

Got one last month and i got a gen 4 B)

[@RamenFuel7700]

Got the Gen 4 Metallic Blue today for 50$ today and its a thing of beauty!

[@charliezobel511]

Fantastic teardown video, super detailed so massive thank you

[@AxionArcade]

I've been looking for a video like this! Thanks!

[@Gabzz0000]

Thank you for this info, I bought a black ps5 controller 1 month ago and I just discovered it’s a gen 4s thank you

[@TheMegatron673]

I have two dualshock 3 controllers that has analog sticks you don't have to solder. All you do take out the old ones and pop in new ones. Of course my other controllers have to be soldered.

[@larssawatzki1538]

Thanks for the great video. 👍

[@HowToX]

Thanks. I didn't not realize so many people would be interested.

[@BrokenOpus]

Another thing to note is difference in speaker, quality, sound etc. I noticed my OG PS5 controller had better sound than newer ones.

[@damhilmn]

Yes and the trigger also feel much better build quality with the spring much stronger

[@ProtectusCZ]

makes sense, Sony wants to cheap out on the revisions as much as possible

[@johnf.2185]

My gen 1 is still going strong

[@ikon8275]

This is just what was looking for, thank you so much!! I knew the upgraded the sticks in version 2, And the springs in version 3, But my nain question was with the last set.

[@mukulnag1578]

Thank you... Nice teardown and comparison ... Now i know my ps5 has gen 4

[@FebreGundam]

So I bought my PS5 day one (I preordered it) and I have 2 010s and 1 020 with drift. I recently bought a new controller (a 040) and still works fine, but it's too soon to celebrate yet.

[@unsaltedskies]

Excellent video. A vital public service to all PS5 controller owners. 👍

[@BlamminJeans]

Absolutely notice the weight difference between my gen 2 and gen 4

[@Tareku26]

yes it is lighter

[@izhanshafiq324]

I feel on my Gen 1, the options and create buttons are easier to press and feel tactile like mechanical while on both my gen 2 and gen 3 controller it feels mushy and require more force to press.

[@DistinctionDino]

Thought it was just me. I have like 5 different controllers and my launch controller just feels better than the rest

[@izhanshafiq324]

@@DistinctionDino my gen 1 is the launch one too. Only the option and create button feels better to me. It keeps getting drift issue but cleaning the potentiometer helps get rid of it for a while. All my other controllers just fell better with haptic feedback and even the triggers themselves.

[@DistinctionDino]

@@izhanshafiq324 hmmm mine doesn’t have any issues at all. It’s my favorite one to use besides the edge.

[@IceKoldKilla]

Still using my Gen 1 black controller. So glad to read stuff like this. I got my white controller that came with the console in 2021 too. Keeping that for when my current one starts having issues.

[@XRazeYT]

BDM010 Here fully modded Controller with Halleffect Sticks btw day 1 Edition PS5

[@thanksyoutubefortakingmyhandle]

I have three ps5 controllers all three have stick drift. And an xbox series x controller for pc that has stick drift. Love it.

[@sup3r-d4n1-bg]

I've had a ps5 since 2021. I have 2 normal dualsense and 1 Edge. None of them have drift. My ps4 controller from 2015 doesn't have drift

[@thanksyoutubefortakingmyhandle]

@@sup3r-d4n1-bg Sweet

[@grthjryrd7552]

Might be a you issue

[@thanksyoutubefortakingmyhandle]

@@grthjryrd7552 Yeah probably, search "Sony faces class action lawsuit over alleged PS5 controller defect "

[@ghb7860]

​@@grthjryrd7552 Dayum😂😂

[@aleffush]

Thanks for this, good job!

[@wightrebel]

I do have something of interest to add. I have a ps5 with two series 1 controllers. I afk and put my monitor Samsung m4 on standby. On waking the monitor it had a problem that it couldn’t see the hdmi port it was connected to and i would press the controller to help find the port with no luck. Today i have changed to the purple series 4 controller and now have no monitor problems at all. I never could find out the problem but got it solved by accident, Hope this helps people out there that have a similar set up like i do.

[@HCIbn]

I’m in need of a new dual sense controller for SF6

[@DVRKSTXR]

My Gen 1 DualSenses *(Cosmic Red/Midnight Black/White)* that I got with my PS5 three years ago have ALL started having battery issues recently. Coincidentally, all at the same time and all exactly 3 years after I purchased them. They barely last 2 hours each before dying. My DualSense Edge is the most solid performer out of the 4 controllers I own. They’ve held up well over time, but I think it’s time to “upgrade” to some Gen 4 DualSenses. Thinking of copping Sterling Silver and Cobalt Blue this time around. I absolutely love the DualSense. I just wish that its battery life wasn’t so utterly mediocre.

[@abrahamalviarez5870]

ohhhh, yesterday I bought a dualsense gen 3 without noticing it, the first time I had a dualsense in my hands was in a local gaming shop and for me, the controller was too big and needed better ergonomics, when this new controller got delivered I was going crazy about "this is not what I remember about the dualsense, this one is different?" thank you, I was going crazy about it for an entire day.

[@JustJamesYT]

they will feel identical as they have the same design and external appearance. that has remained the same.

[@khalidabbsi2878]

Bdm 30 purple developed stick drift after 6 months, my original ones didnt develop until 2 years into gaming with it.

[@philmmader3]

I got the gen 1 dark red and gen 4 dark red. The gen 1 looks better (paint and back are glossier) having a silky velvety smooth texture, but the gen 4 performs better. I don't like the matte feel as much. The triggers are definitely improved.

[@robertlawrence9000]

Good video!

[@chadwolf3840]

Fascinating.

[@gage1911]

Got one right now from the store. Starts with F5. gen 5 i suppose. Im happy

[@HowToX]

Several others have reported this as well.

[@J-fi9bq]

Same!

[@HowToX]

What color?

[@J-fi9bq]

@@gage1911 Midnight Black

[@TheIrisCZ]

In my experience, Gen 1 still feels the best to me, just because it is amazingly quiet. The sticks barely make a sound when they hit the outer housing. Sometimes I still default to the controller I got with the console at launch instead for the DualSense Edge, if I want more quiet experience. However, it can be nothing but a fluke. Also, it's possible that the sound differences are caused simply by continuous usage throughout the time.

[@marcosfernandesdesousajuni9576]

I got 2(both gen 2)/3(gen 3) controllers with drift already, I'm considering getting a Volcanic Red cause it looks dope!

[@HowToX]

It does look nice, but I don't think it'll fair any better as far as drift.

[@syn80]

V5 hall-effect joysticks are the way to go. It will never get drift because there is nothing to rub against wearing down the potentiometers.

[@marcosfernandesdesousajuni9576]

@@syn80 Interesting! I'll look into it!

[@syn80]

@@ShamanNoodles I recommend checking out Metal Plastic Electronics he does very detailed testing on several joysticks. I have the v5 Ginfulls and I'm very happy with them. I also have the GuliKit TMR joysticks and they are also great.

[@poorsvids4738]

And this is why they purposely make unrealizable controllers.

[@utsavpradhan2754]

I could immediately tell the difference between gen 2 and gen 4 controller by just holding it. Gen 4 felt more lighter and more hollow than gen 2 but i think gen4 have better trigger and rumble effect. I still prefer gen 2 as weight distribution of the controller feels balanced but gen 4 feels really top heavy.

[@ryans413]

I like that gen 4 is slightly lighter because it dosnt hurt my hands overtime. My gen 1 controller is heavy and after an hour or two it cramps my hands.

[@LouvreJaramill]

​@@ryans413bruh Thats a strength issje

[@LouvreJaramill]

It's not better it's the trigger in gen 4 is lighter. It should be heavier the effect

[@LouvreJaramill]

Well i have 3 ps5 controllers, the default white one, the red one, and the purple one. The serial numbers on the white one starts with F2 , the red one starts with F2, and the purple starts with G2. Does this means theyre ALL 2nd Gen?

[@headerahelix]

​@@LouvreJaramillWhy you gotta be like that. He might have a medical issue.

[@victorromaniuk]

Great work

[@SUREILLBYTE]

Did you notice anything about the dpads between each generation? A huge problem the fighting game community has had with the dualsense controllers is that the dpad is too mushy and inaccurate on the older generations, but the dualsense edge has apparently remedied that as the shell is reported to be "tighter".

[@MrMarbles]

But how about the durability? Is gen 4 less prone to stick drift?

[@dqzeropb]

Same question here

[@IamBatman225]

Well it's still using the potentiometer so I'm just gonna assume and say: not so much. I will say this though: A controller with hall effects are way less prone to drift when it comes to use. I haven't bought any hall effects yet but I do plan on buying one this week.

[@LebaronJames-xo1st]

It's better than the one, two and three last generations, I have a 3 and 4 generation, the three got drift in four months, the 4 than came with my PS5 Slim, still without drift, the 4 generation is the best so far

[@MrMarbles]

@@LebaronJames-xo1st what games are you playing to get drift in 4 months? I have 2 controllers for more than a year and none have drift and I play on average like 4-5 hours a day.

[@Vianilix]

​@@MrMarbles It'll come eventually, It comes pretty weak at first and then it starts to exponentially grow

[@UAV11]

My two controllers are Gen 3 (purple) and Gen 4 (white). The Gen 3 one feels better for me. 😅

[@f3rns]

I find this video, interesting, very educational and epic awesome. Thanks for the video.

[@SpeedXGamers]

Great video. Very simple to understand

[@ellieclaromorales]

amazing video

[@SHADOW543121]

probably a minor difference but the rumble on my gen 1 also shakes the face buttons which makes a rattling noise. The other controller I have, probably gen 2 or 3 doesn't have this issue.

[@keir92]

I have two gen 1 white controllers from launch (one came with the console), one black and one red from the uk launch of those colours (both gen 1), a black gen 3 from much later, and the astro bot controller which is gen 4.

[@sickhcivc]

one of my controllers has a 5 on it now, got a ps5 this week :)

[@monfrezo]

Does the ps5 controller package that its bought in contain any form of serialnumber or model number on the box itself, or is there another way of determining what generation the controller is before buying?

[@kelbinhow]

Good question, would be good to know but I doubt sellers would give this info, unless of course it's printed on the box

[@thanksyoutubefortakingmyhandle]

I know serial numbers have it, not sure if serial numbers are on the box. Ending in a 1 is bdm-010 and ending in an A is bdm-020. I don't own any 30/40 controllers so someone else would need to say what their serial numbers end in. I do know the older ending in a 1 / bdm-010 are better than the 020 models when it comes to stick drift

[@Vianilix]

​@@thanksyoutubefortakingmyhandle I have one that ends in 0 and one that ends in 5

[@Darkcranio]

Yes, the packaging of the PS5 controller (DualSense) does contain a model number and sometimes a serial number on the outside of the box. This can help identify the specific version or generation of the controller. Here's how you can use these details to determine the generation or version of the controller: Model Number: The model number (such as CFI-ZCT1W for the earlier models or CFI-ZCT1A for later versions) is typically printed on the box. This can help you identify whether the controller is part of the first-generation release or a newer iteration. Newer revisions may have slight updates in design or functionality, so checking the model number is important if you're looking for a specific version. Serial Number: In some cases, a serial number is also printed on the box. While it may not directly tell you the generation, it can still be useful for warranty purposes or confirming authenticity. Packaging Differences: Sometimes, newer versions or generations of the controller are indicated by subtle changes in the packaging design or information listed on the box. For example, updated boxes may mention new features or compatibility improvements. To determine the generation of the controller before buying: Check the model number on the box (ask the retailer if necessary). Look for online resources that list specific differences between model numbers and their corresponding release dates. Consult the retailer to confirm if you're buying the latest version, especially if newer controllers have been released with updated features or fixes. - Via ChatGPT

[@dohnjoe9211]

I bought a Spider-man 2 bundle and it's a 3rd Gen.

[@sankofaafari4374]

Than you for this video. I wanted to know about the different versions they’ve made so far. You should of used 4 of the same colors imo. The standard white. Just for consistency I guess. Also manufacturing variance could have a lot to do with the difference in feeling too. I have 2 white controllers, 1 bought separately and one that came with the console, a purple, and a God of War controller. They all feel different from each other. People have also noticed the launch controllers are much heavier than the later models. My nephew have a black OG model that is heavy and has a better build quality than all my 2nd generation controllers and his white 2nd generation controller. It’s an obvious difference. 2nd gen still feels good and high quality. It’s the launch controllers were probably made with a bit better materials.

[@KING.SAVAGE_1]

They aren’t though, gen1 has less battery. Probably the only difference

[@nickdibart]

The white adaptive trigger housings are removable but held in by a clip where it attaches to the shell that is very hard to spot and reach. I managed to remove one by wiggling and prying the housing in various directions and didn't see the clip until afterwards. Nothing broke, thankfully.

[@vedranbabic7690]

I have two pieces of the first series, one piece of the third series and a DS Edge which is the mother controller for all of these.

[@FisheySauce]

Gen 1, 2, and 3 have different touchpads, I'm not sure about gen 4 though, was hoping to see that in here. Otherwise great vid! 👍

[@ji8651]

My gen 4 sounds a lot quieter than the gen 2

[@grthjryrd7552]

Thats one thing he forgot to mention. The gen 4 touchpad is much better and less wiggly

[@gegamed681]

My gen 3 has a stick drift on the left stick. But not a normal stick drift you know, it's more a stick drift which comes if i make it to the right then it gives the command to the right and afterwards to the left too.

[@borisdg]

Like always/expected 1st run of product is build the best. No cost savings.

[@micahsarm]

Where in the video is that so? They're just different, not better than each other.

[@borisdg]

@@micahsarm The component quality. Looks more sturdy + PCB layout and cables. Too much cables on new to save some penny.

[@ricepony33]

The first run is typically not the one you want from a product production point of view but in some cases the first version has the most expense components and design. Subsequent versions refine and reduce costs and improve reliability. PCB board changes are fairly inexpensive $ but any plastic/mold changes are only done if absolutely necessary as a new tool must be created $$$.

[@magic1wizard]

​@@ricepony33If the changes are small enough the pre-existing plastic mould can just be modified. Which saves a lot money.

[@XCENO12]

thank god i have the gen 4

[@INKf3KT]

Good video. Can you make one dedicated to the dualsense edge please?

[@roc6d]

Could u do a video on different version of the dualsense edge?

[@HowToX]

Perhaps one day. That may be an expensive investment.

[@robertlawrence9000]

I wish they would release a black version

[@sebastianesilva398]

I bought a new gen 2 controller recently and noticed some big differences to my other one - louder face buttons and (most of all) a much more slippery and unpleasant plastic on the sticks.

[@hansiangng2808]

i thought that the analog sticks of the newer gen (ps5s and red) some how feel more 'tactile' for some reason when i first use them. So they actually undergone some minor changes over the years. Thanks.

[@HowToX]

They didn't feel different to me; not saying that you are wrong though.

[@HeroVax]

The latest Astro Bot Controller is still using BDM-040

[@mybeautifulcat7011]

So gen 4 is best ?

[@dkn_chkn]

the old ones the black around the thumbs sticks that comes out to reveal screws is glossy on new ones it’s matt

[@ryans413]

Gen 1 has the glossy part the rest of the generations it’s matt

[@ambrosemilen3582]

I'd wish Sony would change vibration wires from soldering to plug-in connector type. I'd probably snap the wire soldering hundreds of time by accident trying to clean the insides.

[@luis_yance]

Would’ve liked to see a comparison between the trigger springs on all versions. I had 2 of them break on my Gen 1 controller.

[@michaelwesten4624]

what about the springs? you know, the thing that failed the most and they changed them?

[@Alexander-sc3hl]

Gen 1 to Gen 4 Still Potentiometer They could Atleast Change That to Hall Effect, Hopefully Gen 5 Controller Comes out.

[@grthjryrd7552]

Bold of you to assume sony would do that lmao

[@dymos7750]

Checking in here with the new anniversary Model of the dual sense … anyone else?

[@Sad_Elf]

got my base disc ps5 in November 2022 and the controller it cam with is apparently gen 3

[@beasthunter4003]

Corporate wants you to find the difference between this picture, this picture, that picture, and that picture

[@nelsing1978]

I have a BDM 20, it had been used for i guess about 100h when i got stick drift on my left stick making it worthless. So now i ordered a significantly cheaper 8bitdo ultimate 2c with hall effect sticks and triggers. I will miss the PS controller but i will not buy another one since they are expensive and does not have hall effect sticks and triggers.

[@Stefan_Smith]

Idk if this is accurate, I bought 3 day 1 ps5's before Christmas for my kids.. thats 3 white controllers 1 in each of the 3 boxes.. Each purchase came with a secondary black controller.. all 3 of the black controllers start with G11 all 3 of the white controllers start with G21.. I got a ps5 for myself a year later, and that controller starts with F32

[@HowToX]

Interesting. Perhaps you can go inside one of those white controllers and see if it matches the V2 internals I show in the video.

[@outlaw__________8016]

The question is which is better ??? From performance wise...battery life...material quality build.....ext

[@HowToX]

In order to answer that, I would need to buy a hundred of them and open up a lab. This video is just a physical teardown.

[@J-fi9bq]

The second digit on the new black Duelsense I got is a "5".

[@kynshp]

What color did you get?

[@tea.23]

Thank you!

[@Sincethe80sGaming]

BDM-020 is the one my Ps5 came with and it had issues with the touchpad, the inputs sometimes were incorrect and it hovered by itself not allowing me to type with it since it glitched, I had to restart it to make it work.

[@Witeliveli]

is there a way to tell the difference between versions from the box?

[@Republic3D]

Bought my Digital Slim PS5 in July of 2024, and the controller was a BDM-040.

[@zagreatandini2345]

All they gotta do it put in the Hall effect sticks 🤷‍♂️ I feel like they are even cheaper to buy. But hey if you get drift you buy another controller so….. that might be a thing they do on purpose 🤷‍♂️

[@anisalial-maghrabi3215]

Thanks ❤

[@D1n0nlyD1v94]

That's crazy that the 2 major flaws haven't been addressed on any of these models. The sticks and battery life.

[@D1n0nlyD1v94]

Actually, on the contrary i havent had as bad stick drift on any since the 1st model. The 2nd model i have got it quick as well but to a tolerable degree.

[@AngeredStar]

Let me ask you a favor. I have one BDM-040 and one BDM-030 controller. When I compare them, I see orange color tone difference on their LED while charging. Not so much but I can notice. BDM-040 is more yellowish orange, BDM-030 is more orangish. Do you see same thing on yours? Would you mind compare them for me please?

[@roc6d]

Bdm-050 is out now

[@HowToX]

What color?

[@roc6d]

@HowToX so far the community has seen a refresh of the white and black colors

[@XAROYCUTS]

How come I have a lip 1708 but it has 8 screws? So which one is it really cause I wanted to see if I can put mouse click trigers kit on it...

[@rogersmith4363]

Well apparently there are differences with the touch pad…….. 😮 who knew?!?!

[@prowse321]

I wish they can solve stick drift, i got gen 1 and 3 both got stick drift

[@syn80]

replace with hall-effect joysticks. i no longer have to deal with that problem anymore.

[@overdriver99]

@@syn80 I don't see any reliable replacement. every single review said there are some sort of problem..

[@syn80]

@@overdriver99 I posted a video. It doesn't require a calibration board nor do you need to manually adjust using a pin. This is available now and its not expensive. I will be swapping out my current hall-effect sticks for these newer upgraded V5 at some point.

[@ryans413]

In my testing just using the controllers normal not abusing them and keeping the outside clean they last 6 months before stick drift happens. Even after cleaning the sensors which are not hard to get to but is a little bit annoying to take apart the controllers they still drifted so it seems like these controllers or at least the thumb sticks have a 6 month life span which is awful and cheap from Sony. These controllers in Canada where I live cost 94 dollars it’s freaking ridiculous.

[@sharymens8187]

thanks!

[@Monkeybrain760]

I don’t know if the potentiometers on the GEN four is across-the-board are different color because I have two GEN fours and they’re still the same color as the original

[@TiredParent]

@HowToX Can you tell what Gen the controller is inside the box without opening it? The box underneath has CFI-ZCT1W written and there is a POS Car Code next to it. I wonder if it is possible to understand the model / Gen without opening the box. I fit is an old version, I'd return. The controller is in Cosmic Red colour.

[@HowToX]

I doubt there is a way to do it with the box. From what I know, the serial number isn't on the box.

[@iNomNomAwesome]

Until they fix the widespread stick drift issue, I couldn't care less about anything else they change.

[@scottmedhurst1666]

Are the direction and other buttons all interchangeable between all 4 models?? (But not L2 R2.) or are they too??

[@azurebluegames]

Would you be able to tell the version from the box as well?

[@HowToX]

I had the boxes, but did not want to assume all boxes are printed the same way as mine. Especially when you consider worldwide distribution.

[@kyosukeshidou1370]

I Think .. that blob on Gen 4 is to reduce the plastic sound when the adaptive trigger is active.. I find the sound to be annoying abit .. BUT I don't have Gen 4 , currently using Gen 3... sooo that's might not be the case

[@ryans413]

The rattle sound or the clicks sound. When I first played a game which had the adaptive triggers i thought my controller was broken. Gen 1 makes a crazy amount of rattling noises Gen 2 and 3 have like a clicking noise. Gen 4 still has a noise but is a lot more silent.

[@msd5808]

I've noticed slight noise sounds from the headphone jack on early DualSense controllers (more noticeable in a menu, such as the system menu, when the music is turned off. It buzzes a little when a sound effect plays and then when going back to mute). Was this ever improved in the later releases?

[@HowToX]

I haven't heard anything about it, but I wonder if anyone has tested the jack. Perhaps I could have but I didn't think of it.

[@lanternnnnn]

Yes i noticed that the gen 1 is worst for the static noise, gen 2s its barely noticable, gen 3s some are really noticable and some arent, and gen 4 is barely noticable.

[@msd5808]

@@lanternnnnn thank you. I may get a latest edition controller sometime. is the Astro Bot one Gen 4 (40)?