Ducati 959 Panigale - CNC Racing RPS Rearsets Installation

[@MikeBrown-do8gl]

Another good video dude! I’ve used a couple of your vids doing installs now including this one. It was a huge help so thanks!

[@dananderson4487]

Just picked these up for my 2023 V2 Streetfighter although i choose the Red and Silver instead. Like you said your video is the only one I could find as well so many thanks brother keep it on 2 wheels and always ride red.

[@gunsnsails]

I just got sucked into your videos. I had an enlightening moment while watching the Akro install. (I don't have the Y pipe...) But the clutch cover looks "easy enough that I can probably tackle that without assistance. I have no reason to do rearsets but you made it look easy! Thanks for the videos!

[@JamieW5024]

Helped me out. Installed mine on my V2 today. As you say, the instructions were poor. Also wasn't sure about the pins in the pegs and were a pain to fit. My heel guards fit though

[@edp9666]

your video helped a lot, theres no fitting instructions so i was using the master cylinder bracket that came with the bike which required the spring to be compressed to the max. after seeing you video i removed the bracket and things became a lot easier. I thought i was being proactive by assembling the rear sets ahead of time and quickly realised that it wasn’t 26:29 a smart move. felt the spring against the master cylinder was going to cause issues but applying the washer that came with the unit introduced a bit of play, did you set come with the washer which would have been tied to the sprint? it doesn’t appear in the install schematic so im going to assume it was just there to keep the spring in place. my bike is a 2023 Panigale v2 if you’re interested.

[@Vicdavies151]

Hi I’ve seen many videos before some yrs ago when the 959 was “the bike” to have, and they did the Same as you except once fully installed they took it off as you did on the original so as to torque the inside areas then reinstalled job done, but great to see it again 959 would be the one for me as like you 5ft 7, and basically it’s as much as you need even today tc. Vic from england

[@fredericksmith4176]

Thanks for your videos, the CNC instructions are terrible, you made it easy. God bless.

[@toddcrowe9]

This really helped me with my install, thank you!

[@robfaranda4965]

Thanks for the video... Just installed the CNC Evo GP's on my 959 and it was extremely helpful... CNC needs to work on their instructions...

[@bikesandbeats4693]

Yeah, a lot of the parts for these bikes are made in Italy so the instructions are translations from Italian and are most of the time terrible. You should see the instructions for the rear sets. 😂😂😂

[@seekingthetruth3410]

I like the emblem on those ones,the version for the monster 1100 doesn't seem to have it ,

[@thugstylef]

I really appreciate all your vids I used them for most of my mods I’m getting these rearsets next and gp switches and a ride height linkage from Ducabike all hopefully Black Friday Let me know how you like the gp shifting for the street

[@danjcstafford]

Great video as always! Love the Wu t-shirt!👍🏻

[@80azot]

Great video. Please keep making them. Which foot rests have you ordered? I just ordered some Ducabike rearsets but opted for Ducati OEM carbon fiber foot rests. Hope they will line up. I decided to to use the Ducabike foot rests as wasn’t sure how sturdy they are as compared to the Ducati own ones.

[@EssamAlthobaiti]

💯

[@ashinoz11]

Hey mate, did you have to adjust the rear brake after fitting the rearsets? My pedal has to go all the way down to brake compared to barely touching it before. Do I need to bleed them?

[@volvogt21]

Great work. Thanks for sharing

[@mistha407]

I just got these install on my 899 Panigale. The CNC rearsets are very aggressive & they feel more sturdy than the factory rearsets. Only issue I have is the shifter. When shifting up, it’s too high to reach. How do I adjust the shift peg lower

[@junepetr3481]

How do you clean or detail your swing arm to look fresh like that? Mine has a faded look to the finish. Your bike looks great. I just purchased a set of Sato rearsets and found your video for some pointers and help. Thanks for the video and looking forward to your reply.

[@bikesandbeats4693]

WD40 😂

[@junepetr3481]

@@bikesandbeats4693 I appreciate that. Do you still have that same bike and are you still doing trackdays?

[@bikesandbeats4693]

@@junepetr3481 Still have the bike but haven’t done track. It got so expensive after covid between them raising prices and the cost of gas to tow the bike down there. I’ll probably do a couple this year. We’ll see.

[@Vedoibambinipovri]

Still thank you!

[@njriders3686]

Looking good

[@fixuup5796]

What size torx head did you use for the removal of the left side pin/bolt that connects the shift lever?

[@bikesandbeats4693]

I don’t remember off the top of my head. Might have been hex. But either way I have the whole torx and hex sets that have all the common sizes.

[@bobby3914]

Those rearsets are dope, I am waiting for my new 959 next week. Did you go motogp shift? Are does it not work with the quick shifter?

[@bikesandbeats4693]

Yup. I did gp shift. Works perfect with the quick shifter.

[@bobby3914]

@@bikesandbeats4693 Awesome ride safe, bike is lit.

[@SouthernSpecialist]

@@bikesandbeats4693 just got a bike with the CNC rear sets how do I change it back to regular shifting not going?

[@milosostojic9559]

Did you end up cutting the brake switch bolt, my pedal sits low and it’s screwed in all the way

[@bikesandbeats4693]

Yeah. A little bit.

[@milosostojic9559]

@@bikesandbeats4693 Thanks man much appreciated. Also love the video it helped me heaps with the install

[@uxjordan]

Hello, what differences do you feel compared to the original?

[@bikesandbeats4693]

They keep your feet higher from the ground when leaning the bike. They also have better grip. Not really necessary for just street riding unless you like the look.

[@uxjordan]

@@bikesandbeats4693 sound good,thanks

[@kyledagnone9956]

Hey mate did you have to bleed the rear brakes when installing these?

[@bikesandbeats4693]

No. It uses the stock brake light switch so you don’t have to mess with any fluid.

[@hectorgarcia537]

Did you lower your bike ?

[@bikesandbeats4693]

No sir.