Ducati Diavel 1260S Adjust Chain Tension

The distance of the chain, at rest, from the swingarm should be between 31mm and 33mm. The TORX pinch bolt requires a T60 TORX bit, and should be tightened to 40Nm.
Tools Required
Chain adjustment spanner wrench amzn.to/3FCAs6K
TektonT60 TORX Bit amzn.to/3JRdvPN
Torque Wrench amzn.to/3yTYExI
Tool Sets Recommended
Tekton TORX Set amzn.to/3yUCnQe
Ducati Maintenance Kit amzn.to/3K3SyBr
12-pack Starting Fluid amzn.to/3Tuw3sc
Grunge Chain Brush amzn.to/3yPPxOD
Astro-Grip Nitrile Gloves amzn.to/3yPPH8H
Case of Shop Towels amzn.to/3yPPH8H
Motorex Chain Lube (Road) amzn.to/401ugNX
Motorex Chain Lube (Racing) amzn.to/42pxo7L
Save 64% on your cell bill. Switch to MintMobile 5G using my referral link you'll get a $15 account credit fbuy.me/t4uON

[@Farhan.DucatiS1k]

I just picked up my 2021 Diavel and loving it. good video as I want to work on the bike myself instead of always going to the dealer..

[@850bimmer]

Thanks, just did my 2020 at 5800km/3600mi for the first time, was about 40mm, the adjuster is really sensitive, firt attempt got me at 25mm, the loosened up and it was 35mm, took me a couple of tries to get it right. Thanks for the pinch bolt torque, that's what I was looking for.

[@TrickMasterPC]

Yeah, to achieve the desired level of precision it takes a few tries for sure.

[@travislp91]

Very awesome video!! Thanks and a big help. Very clear and detailed best one out there for sure for us owners. Nice job and keep them up

[@danb5253]

Good info but why don’t you do videos actually doing it?

[@Dv1demon]

Another legit vid bro! But for gods sake get a tail tidy! Just saying 🥴

[@TrickMasterPC]

Which one would you recommend?

[@travislp91]

@@TrickMasterPC I just installed the NRC tail tidy and the wiring kit to make the blinkers integrate into the taillights. Easy awesome install so worth it! And would be a good video

[@TrickMasterPC]

@@travislp91 I only see one kit and it doesn't seem right... No blinker wiring mentioned www.newragecycles.com/Ducati_Diavel_1260_Side_Mount_License_Plate_p/1260-side.htm

[@Dv1demon]

@@TrickMasterPC mine is just a foldable plate holder attached with a bolt hole right trough the T handle super simple and clean! But you have get the box that integrates the turn signals in to the brake lights from custom led or sum thing like that

[@marc5221]

Custom led makes the kit for the integrated blinkers into the brake lights. I then purchased a new rage cycles side mount but be specific or call when ordering bc they’ll send you for the old models