Ducati Monster 696 796 and 1100 key programming

[@dazag70]

Is this exactly the same procedure if 1 our genuine Ducati keys works and we are adding a new spare genuine (uncoded) key (which was misplaced) . Thanks

[@ErayEren9]

How can ı find the code? When ı turn the normal key write the 00000 pro and not working

[@Zx14rrrrrrrrrrr]

So all I have to do is order the new keys with code.. And do this? Bought a used bike and the key won't work now.. Thanks!

[@MrDacibox]

Eres un crack, en el taller ducati no supieron hacerlo. Gracias

[@titaniunhead]

Hi, is possible to do the keys for a Ducati monster 797 (2020) that lost it's keys??? Thanks...

[@perrysouvana2049]

I lost both keys but have one spare key without chip and code card I put in the code in per your vdo the bike cranked but won't start. Do you think you can make key for me if i send spare key and a copy of code card? Please advise. Thanks in advance for your time. Perry

[@johnwhitherspoon2342]

How can I obtain the key code? Recently purchased a bike from the auction without any key so I'm trying to get it going

[@Zx14rrrrrrrrrrr]

Did you get it done?

[@johnwhitherspoon2342]

@@Zx14rrrrrrrrrrr I had a locksmith make a new key for about $75

[@Zx14rrrrrrrrrrr]

@@johnwhitherspoon2342 I have a key. My problem is the bike is asking for a code. And I don't have the code lol

[@racingdreamz8021]

@@Zx14rrrrrrrrrrr Yea bro my locksmith programmed everything

[@Zx14rrrrrrrrrrr]

@@racingdreamz8021 lucky. I called a few places. No one even wants to touch it. And the Ducati dealer sucks. They're saying just change out everything. Ecu, locks sets, ignition, dash.. They're crazy

[@danieli.5492]

I’m looking to purchase a 2014 796 from an auction. No keys or card is provided. Can I swap in my 2009 696 ignition cylinder gas cap and dash ?

[@0612Devil]

I recently bought a new cluster for my Monster 796 as the old one was damaged. I have the original keys and code card. Can I use this process to program my new cluster to my bike?

[@sosdiagnostics1800]

New, yes. Used, no. Also, if you want the odometer corrected on the replacement cluster we can do that for you. Email us for a quote.

[@cristiancamberos5]

Will it work on a 2020 hypermotard. ? TIA

[@charliejdelacruz1477]

our hyperstrada had fault EXVL.. so we send the bike to a shop claiming they can clear the fault .. (referred by friend) when they hook up their scan tool .. they cannot clear fault ,and to make things worst the cluster indicators, signal lights front and rear. tail lights are all blinking alternately kinda like a police car blink... what could be the cause and what does the bike is doin? wont start now.. no crank.please help

[@rexixtencia1]

Hi. Did you manage to solve this issue? How did you fix this? Something similar happened to me and now I’m trying to figure out why the screen went black and now is blinking like every 3 seconds

[@chittypoofs]

I lost one of my keys for my 2014 Ducati Monster 796. I looked all over to get it replaced, no one could do it, not even the dealer who said it was impossible without the 5-digit code. I bought my Ducati from that very dealer, they never gave me a card with a 5-digit code. You're supposed to get that card and two black keys, I just got the keys. The usual way to get it replaced is buy a blank key from Ducati for $90, then have a locksmith laser-cut the key (another $40-$50), then you can (have Ducati or do it yourself) program the newly laser cut key with the bike using the 5-digit code on the card. Without that card you're basically SOL. Without any keys or card, you need to replace the entire gauge panel, ignition, etc. - $2000-$3000!! There is another way, it is called the Ducati Key Clone, a knowledgable locksmith can use the remaining key you have to duplicate another functional key (laser-cut and programmed). Only one locksmith in Phoenix area can do it - ALCATRAZ LOCKSMITH [phone] ask for Todd Hagan. It took him 10 minutes - fully functional key at about $100. He can even do it w/o any keys, but it would be considerably more expensive, but not the $2000+ Ducati price.

[@fredericksalinas423]

Can you do for Ducati monster 795?

[@midgemiles864]

Hi, I recently purchased a 796, the bike was running well, I fitted aftermarket indicators with the incorrect globes, the engine management light is now on, the fault says CAN,, could this be the indicators ?? or where should i look < thanx

[@sosdiagnostics1800]

we could definitely test the system for you. Please email from our website for a quote and requirements.

[@jaycatimonster7409]

can u only program one key or do u have to have 2 keys? cause i only got one with my 2011 696. and the end of it chipped off so it wont go in the ignition i just got one other key cut can i just program one?

[@Dsam04]

looking for the same answer, did you get your key reprogrammed?

[@ChadEdwards1]

Sorry, didn't get the message. As noted in the video, 2 unique keys are required. If your one key still works, get a 2nd one and program it yourself. If you need a quote for a 2nd key, send us an email.

[@mambrake]

OK can you clarify this for me?? I have a 2008 848 with one Key that already turns the bike 0n. So what I would need is another key with chip in it??

[@ChadEdwards1]

2 keys are required. Refer to the video and all the comments below.

[@iman25nasriq]

will this procedure work if using 1 original ducati key with electronic code in it and 1 aftermarket key without the electronic code but have the same pattern??

[@ChadEdwards1]

both keys must have unique and valid electronic codes in them. It will depend on how the aftermarket key has been programmed. If it has a valid code in the electronic chip (transponder) then it will work.

[@marveloushippo8156]

Hi, I lost one of my ducati 795 key. How to re-program the new key ? And is it possible if I program 2 new keys ?

[@sosdiagnostics1800]

The Ducati Monster 795 will require a Ducati programming tool. Any local dealer or you can email us for a quote and list of parts to send.

[@lozziogio2]

Do you know if the procedure is the same for 2010 796 hypermotard ?

[@ChadEdwards1]

It is very similar. I have not had a chance to setup our Hyper dash. I think there may be a different button to push to get it into program mode. But, I cannot remember for sure. Play with it a little bit. You cannot damage it.

[@Wave_-xb7qi]

ABS?

[@emrichphil1]

The 2014 Ducati Monster 696 Immobilizer system is the I2K-2 and does not come with a code card.

[@sosdiagnostics1800]

Sorry, you are incorrect. You are referring to the 2014 Monster 821 and 1200. The 796 is still on the old system.

[@emrichphil1]

Up until 2013, the immobilizer system that was used in the Monster line was the I2K system. This was true for Monsters 696 from year 2009 to 2013, true for Monsters 796 from year 2010 to 2013. After 2013, Ducati switched the immobilizer system to the I2K-2 system. This system only comes with the immobilizer and 2 black keys. 2 black keys with removable transponders for the 2015-2016 Ducati Monster 821 and 2014-2016 Monster 1200. There is also the 2 black keys without a removable transponders that Ducati mentions only for the Scrambler, but forgets to mention the 2014 Ducati Monster 696 ABS and probably for the 2014 Ducati Monster 796 as well. I currently have a 2014 Ducati Monster 696 ABS, and CAN confirm that my bike never came with a "Code card", but with only 2 black keys. The owner's manual as well as the dealer also confirmed this. The 2013 Ducati Monster 696 owner's manual does reference a "Code card" but this has been removed in the 2014 version.

[@sosdiagnostics1800]

@@emrichphil1 Our customers with a 2014 M796 still appreciate having the code card since the 2014 here still uses the same instrument cluster as the 2013 and uses the same key programming procedure. We've already done 7 of them. But thank you for the feedback.

[@christianacevedo6270]

Can you help me bro with the exact procedure for an evo 848 2012?

[@sosdiagnostics1800]

Just for you bro: kzbin.info/www/bejne/rmmbg3qNpqZngKM

[@mjbb93]

I broke my2013 ducati 796 cluster and a only have the black key , do i only have to buy a new cluster in order to turn on? Or a new key as well?

[@sosdiagnostics1800]

You will need 2 keys to register if you buy a "NEW" cluster. However, if you do not have a code card, we recommend getting a key set with code card before doing this. This is available at keysforducati.com

[@richarcapoulk6300]

I have this problem on my bike

[@googlr8396]

66954

[@artemrybchak4823]

Hi. There is an IMMO error lights on my Ducati Monster 696 and it doesnt start the engine. i dont have the Code card. I only have a key without chip (lost it and tried to start the engine without chip), Can I get this code from the dash and program new key?

[@jaycatimonster7409]

can u only program one key or do u have to have 2 keys? cause i only got one with my 2011 696. and the end of it chipped off so it wont go in the ignition i just got one other key cut can i just program one?

[@ChadEdwards1]

you have to have 2 OEM keys or correct and unique aftermarket keys to do this procedure.