Ducati Panigale V4 | How to Rebuild Front and Rear Brembo Calipers

[@chuecops]

Great and detail video. I am going to install Titanium ventilated pistons on my Brembo M50 calipers. Greetings from Argentina!!!

[@MotoGarageTV]

I would love to see that process. Please tag me when you post. Thanks

[@wrestrepo]

Great video! The level of detail to your work can be clearly seen. Wish all mechanics worked like this. What made you replace the Ducati stock brake lines? I did some research and the OEM lines are already steel braided. Was it aesthetics and weight?

[@MotoGarageTV]

Hey, thanks. I appreciate that. You're right,stock lines are steel braided. I went with the carbon for the aesthetics but also they say They have the highest burst rate pressure out of any other line on the market (over 16,000 psi!), and offer the most direct brake feel.

[@brilliantspeedsuperbikes]

Thank you for this video. Did you say you'd link the Brembo part numbers for the seal kit, O ring, etc.?

[@MotoGarageTV]

Here is the website to the rebuild kit. www.gothamcycles.com/

[@rubio90r]

Was it hard to install the Fren tubo brake lines?

[@MotoGarageTV]

Hey, thanks for watching. No, these lines came exact lengths and were very straightforward on the installation.

[@adamlopez6925]

Can you provide a link for the rebuild kits please I have to rebuild my rear Thankyou

[@MotoGarageTV]

I purchased from Gotham cycles on Ebay. They have two options, full rebuild with pistons or just seals and bolts on option 2. Both kits are Brembo branded. Hope that helps. Good luck

[@bruce1813]

Hi, I went hunting for the kit on eBay but couldn’t find it.. any chance you could link us to it?

[@MotoGarageTV]

@@bruce1813 www.ebay.com/itm/354265462694?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=CWBy9_DFSLW&sssrc=4429486&ssuid=lSL1nP-7Tma&var=&widget_ver=artemis&media=SMS

[@mylifeinnewyork5625]

great job showing how to freshen up your calipers! what was the total price for front brake caliper parts? This is something im interested in doing to my bike. I havent changed the seals in pistons and have over 10k miles on my 2019 v4. thanks for the info!

[@MotoGarageTV]

Thanks. I paid 306.94 for just the front caliper parts. That's not including the brake pads. Part#61240371A The Spring/ Pad Stopper Was about $28 dollars each, but you'll need 2. The seals and piston kits were around $120 each. You'll need 2. Hope that helps.