It’s impressive fixing and changing stuff but it’s the designing that intrigues me
@yoonracing77392 жыл бұрын
I was concerned about the matter, too🤣
@cikguz16863 жыл бұрын
Always in love with the bunyi "kacang" of the dry clutch
@yoonracing77392 жыл бұрын
i'm sorry, i can not understand ㅜㅜ
@imaulana48082 жыл бұрын
Yeah , like kacang in a jar, shaken shake
@danxs43612 жыл бұрын
Hahaha..kacang kacangan
@pache962 жыл бұрын
Yeah bro, Cang telur
@agusjibu18672 жыл бұрын
Ngentot kali.
@yoodonggeun20563 жыл бұрын
영상, bgm 완성도가 점점 좋아지고 있는거 같습니다
@yoonracing77393 жыл бұрын
고마워🥲
@KaranKumar-hu4kn2 жыл бұрын
11
@amiruladib82062 жыл бұрын
Keep making video like this sir. This is so statisfying ❤️🥰
@yoonracing77392 жыл бұрын
thank you, I'll try😁
@phonemeunit1973 Жыл бұрын
Replaced so many of those damn water pumps lol. I think this year they finally got it right.
@NeilosFrancis Жыл бұрын
when you say this year, the new model or better water pump, mine keeps failing and its doing my head in so much i want to sell the bike
@phonemeunit1973 Жыл бұрын
@@NeilosFrancis Poop. Sorry to hear that. Is it a 2024?
@maximegorov67213 жыл бұрын
Ohhh my god... the bike without the lower fairings at the end 😍🤤
@yoonracing77393 жыл бұрын
thank you Maxim, i couldn't assemble under fairings with stock side stand... hahaha
@ducatilifechacha99073 жыл бұрын
잠깐잠깐 보이는 전완근과 핏줄, 로렉스가 매력적입니다~👍🏻
@yoonracing77393 жыл бұрын
감사합니다, 형님. 이제 정비영상이나 정길이 빨리먹는 영상을 메인으로 가볼라구요 ㅋㅋㅋ
@ducatilifechacha99073 жыл бұрын
@@yoonracing7739 ㅋㅋㅋ 너무 기대됩니다~😍
@backho122 жыл бұрын
The perfect bike for downtown Seoul traffic!
@yoonracing77392 жыл бұрын
yes it is...
@guiltygearcore2 жыл бұрын
Wow bro this is like an ASMR vid. Nice.
@yoonracing77392 жыл бұрын
I appreciate your reply. NZane🙂🙏
@guiltygearcore2 жыл бұрын
@@yoonracing7739 Welcome sir. Keep up the good vids!
@MotoSurgeon Жыл бұрын
What is the tool that was used to help with installing the main seal?
@c__TattinhNhiАй бұрын
Are the clutch friction plates broken? I find them unusual. Or is the original car like that?
@musamusa29612 жыл бұрын
Thank You Almighty God I will buy one for myself
@yoonracing77392 жыл бұрын
yes you can
@TheSwampDaddy2 жыл бұрын
What torque wrench used at 3:50?
@Haewonpark582 жыл бұрын
tonichi
@yoonracing77392 жыл бұрын
@@Haewonpark58 thanks brother.
@yoonracing77392 жыл бұрын
that is tohnichi QL50N - MH, Robert. thanks.
@NabGer Жыл бұрын
When the water pump leaks, the coolant doesn’t get into the oil?
@grishchenko1991 Жыл бұрын
Hey there, unforutnately my water pump just went too and will be doing this on my own. Did you use the official Ducati tdc tool or whatever to hold the "gears" when refitting the propeller on top of the pump? Think the workshop manual states there is both one used to loosen and another to tighten? Curious if can just use something else instead.
@enricogranata9006Ай бұрын
Greatings from Italy, I'm on my fifth water poup replacement in 30k km on my V4S. Did you find by any chance a way to avoid or mitigate the failure? Did you find the reason why it leaks?Actually I am in contact with Ducati that is working to solve this problem, the company that produces this poups it's a medium company near Bologna but they made poumps for every kind of market. So strange that they didn't yet find a way to improve it. Another company partner of aprilia is interested in building an after market replacement for this engine and they are working on it right now. Let's hope to find a good solution quickly.
@lifes2short_em8 ай бұрын
1:10 what are the 2 tools that's been used? My sp clutch is stuck and Im finding it hard to remove the clutch. :-(
@cesbaral Жыл бұрын
I have a streetfighter v4 sp, which is also with stm dry clutch. What's the average mileage it last?
@volksdragg Жыл бұрын
How do you get clean the sealant off so good???
@daveyt48023 жыл бұрын
What happens when the water pump seal fails? How long does the dry clutch seal last?
@yoonracing77392 жыл бұрын
Possible engine oil or coolant leakage from the water pump drain hole. dry clutch seal is fine~ don't have to change every time^^
@wheels.nature2 жыл бұрын
Nice new subs here😍🤩🥰
@yoonracing77392 жыл бұрын
thank you
@aaberrill3 ай бұрын
What brand of super lube is that installed on the water pump housing shaft?
@NinjaKnight003 жыл бұрын
How many miles/km’s did the old clutch and water pump last ?
@yoonracing77393 жыл бұрын
old clutch~ under 500 km's , water pump~ over 2,500 km's
@ablohin302 жыл бұрын
Hi, our team is also racing V4's, just have a question, do you replace waterpumps as often as we do? Our pumps seem to brake exactly every 2500km... (we use H2O radiators) Do you have any solution? Thanks
@yoonracing77392 жыл бұрын
I though H2O radiator is solution for that ... I'm keep finding the solution, lets keep in touch... thanks
@enricogranata9006Ай бұрын
@@yoonracing7739 I though the same for H2O damn. I'm still deciding what to do 30k km and I'm at my fifth pump, now I'm talking with Ducati trough my lawyer let's see what happens. Maybe a different liquid cooler?
@kajik389 Жыл бұрын
Nice video, what is the tightening torque of the water pump and cover bolts? 8-10NM?
@g33mo215 ай бұрын
So what it is? I tightened 10nm and 2 bolts snapped.
@GenericEric034 ай бұрын
@@g33mo21 "Tighten the new screws (4) to a torque of 3 ÷ 3.5 Nm + 90° angle (Torque check 5.5 ÷ 10 Nm). During tightening, comply with the specified sequence." that's what the manual says the division symbols mean 3 to 3.5nm
@alx1162 ай бұрын
can you convert a v4r to wet clutch??
@v4honcho213 жыл бұрын
I’m thinking of getting a dry clutch conversion. On average how much kilometres do dry clutch plates last for mostly city riding? Is there like an average cost for dry clutch replacements?
@yoonracing77392 жыл бұрын
If you want to use only city riding? Honestly, I don't recommend it. the reason why dry clutch mileage is very short... but if you need more power deliver? go had !!! dry clutch replacements cost is about 4 hours labor~ in KOREA, thanks.
@ncjsgrki2 жыл бұрын
I believe the dry clutch last 3,000 miles or so, but it depends on how hard you ride it.
@zacharywhitney4795 Жыл бұрын
@@yoonracing7739I’m in the garage changing my plates right now. 9037 miles on these current plates. Started to slip about 20 miles ago
@ilovepizza82639 ай бұрын
i have a v4 2022, my plates last about 5,000 miles and i ride pretty hard
@desmomotodesmomoto20333 жыл бұрын
Show us how to do the valve adjustment.
@yoonracing77393 жыл бұрын
I need to keep a secret, some of part. But I'll prepare for that, on some testastretta engine.
@scotsmith88105 ай бұрын
Pink Pen ! I love you!
@kookiebub2 жыл бұрын
The new pump has a smaller impellor than the old pump ???
@kookiebub2 жыл бұрын
Thanks for the LOVE (?), but can you explain why the new pump has a smaller impeller ?
@yoonracing77392 жыл бұрын
big one for v4s~ small one for v4r ~
@kookiebub2 жыл бұрын
@@yoonracing7739 I see ...because V4R revs higher and is faster, less cooling required ?
@kaylostims9 ай бұрын
What is the Torque Specs for the bolt for the dry clutch plates?
@FaqsMotorChanel2 жыл бұрын
🙏🙏👍👍👍👍amazing
@yoonracing77392 жыл бұрын
thank you
@tommykairatk18252 жыл бұрын
Hi sorry can i ask you about 1199 stm evo gp install question?
@yoonracing77392 жыл бұрын
you can, but i have never tried before~ for 1199
@GOHO-NO.12 ай бұрын
역시 장인의 손맛입니다^^~~~
@yoonracing77392 ай бұрын
@@GOHO-NO.1 감사합니다
@digeberaja92722 жыл бұрын
Wow 👍
@yoonracing77392 жыл бұрын
😁👍
@azizii6143 жыл бұрын
Music to soft for this bike😁
@yoonracing77393 жыл бұрын
I agree~ thank you for your advice. I need more music to choose😭
@wjrjfhhegwg2013 жыл бұрын
첨보는데 영상 👍
@yoonracing77393 жыл бұрын
감사합니다 🙂👍 열심히할게요
@RomyMunanjar Жыл бұрын
bike motorr motto gp 2023
@관록의눈3 жыл бұрын
기다렸다구요ㅋㅋㅋㅋ
@yoonracing77393 жыл бұрын
고맙다, 역시... 열심히할게 ㅋㅋㅋ😎
@vietmanesemechanic63312 жыл бұрын
way too much silicone on the waterpump
@enesfazlic60172 жыл бұрын
Hell yeah way too much.
@yoonracing77392 жыл бұрын
please check the workshop manual.
@vietmanesemechanic63312 жыл бұрын
I think you should start taking votes how long you been working on engines me 35 years
@giovannidolci8791 Жыл бұрын
Nah that's ok, believe it or on I'm working on Ducati V4 assembly line, that's more or less the amount of silicone robot put on the pump 👍
@federicocao574 Жыл бұрын
I don't really know hahaha, but for my personal experience, internal water pumps it's a NONO for me. For a race bike it's ok, it's meant to be revised, but for a commute bike not so good. A friend of mine had a internally leaking Honda África twin. And he didn't know it, untill was to late for the crankshaft bearings and the camshaft bearings and shafts. All scratched and totalled. Honda took care do. But still. Internal water pumps. Nonono.
@manishrajbhar35543 жыл бұрын
Are bhai hme bhi sikhna hai bike ka kam
@yoonracing77393 жыл бұрын
??? I don't understand...
@mdshahbuddin38582 жыл бұрын
@@yoonracing7739 he is trying tell that he also want to learn about bike repairing
@suradiadi3052 Жыл бұрын
zooz suaranya
@李盼-j6o2 жыл бұрын
这机油太干净了 都能炒菜了
@yoonracing77392 жыл бұрын
Race bike. Use only motul 300v for just one track day practice or one qualifying race and main race 🙂
@sm..20222 жыл бұрын
Prefect
@yoonracing77392 жыл бұрын
I'll try
@luispadilla75192 жыл бұрын
😒😒ducati 🤦♂️🤦♂️🤷♂️
@yoonracing77392 жыл бұрын
ducati is the best.
@luispadilla75192 жыл бұрын
Vamos peco carajo 💪 🇦🇷👍🍻
@ismailraja87342 жыл бұрын
It's wo Stupidity of Ducati .. any thing which Revolve or move Extremely Fast must me Wet with Lubs should not be Dry
@mdshahbuddin38582 жыл бұрын
Dry clutch is used because it has less parasitic loss and moto gp bikes also uses dry clutch
@carlobrotto71327 ай бұрын
You're so right , the best bike engineers and mechanics of the world have Stupidity 😅, everything must be wet and desmodronic system is not a masterpiece of engineering, it should not be dry...! 😂😂🤣 You're so original : write a mail and send it to Ducati since you're so skilled and aknowledged in mechanics...