Dumbo RC X6 radio review

[@christophedecavalla2941]

Two things that really need to be mentioned are that this transmitter/receiver combo has more range than probably any other unit and that it has quite fast response times. The range, on other channels, was tested to work at over 500m, which really is very impressive, especially for the money.

[@StunterSteve1]

I purchased additional receivers and run 4 different brand models with 1 transmitter. I have to make slight adjustments to throttle dual rate when chaging models but no other issues.

[@CorruptName1]

If you take the sticker and screw off the wheel and pop off the wheel, the hard plastic separates from the center wheel. You can then put a foam or rubber grip on perfectly. I added a tiny bit of hot glue to make sure it doesn't slip. It's like they made it to do this.

[@RazorRC]

PC Planet whoa, awesome tip!

[@louisabelhard9596]

​@@RazorRChey do you know what channel 5 does? Im confused why its there😅😂

[@NolanGrout_13]

It’s for like extra things you can add to the rc car like lights, accessories etc

[@louisabelhard9596]

@@NolanGrout_13 u sure channel 5 can be used for lights?

[@TheWheels1965]

Hi, I tried to do a multi binding with two other cars and it didn't work very well at all don't do it! But the range and gyro control is great! for the money its very good. cheers

[@NolanGrout_13]

Wow, I was really surprised to hear that these guys at Dumbo RC make Radiolink products. 😂 Also I was maybe going to buy a Radiolink transmitter receiver bundle for over 2x more but saw that this is pretty much from Radiolink so I’m buying this one lol😅

[@jonthomas8487]

Easiest receiver to bind. I just got one. I’m actually liking the analog dials on this better than the digital display on my Flysky GT3B. Can you tell me where you got the foam wheel?

[@MischaGielen]

Good question, started to read the comments to see if someone else was also interested in the foamy part ;-)

[@jonthomas8487]

@@MischaGielen here’s what I ended up using on mine. I just used Shoe Goo to glue it on the existing plastic wheel www.jconcepts.net/shop/dirttech-foam-grip

[@RCsRCCars]

I got one based on your recommendation. Going to use it for the Axial Capra because it has a dig servo and led lights. So the 6 channels will come in handy. 👍

[@bobjackson6496]

I was planning on doing the same thing. How has it help up for you?

[@IronT0Steel]

How is the Dumbo RC X6 compared to the Spectrum SLT3 as a first time beginner radio transmitter ?

[@aurimastarasevicius9966]

Thanks for the review. Actually it is VERY easy to DIY those additional 5-6 channels if they are missing. You only need a pair of 1KOhm potentiometers in series and drill the holes. The socket for them is already there and even clearly marked.

[@evanlarsen224]

Good comprehensive review, like that you included a bit about who/what DumboRC is. But why start by showing foam on the wheel for the review, if it didn't come with the radio??

[@DaveKoko]

Hey there everybody, I know this video is four years old but I thought I would give my two cents. I have a few of these remotes and they’re really great. I don’t know why this just popped in my head but for anyone who has a RLAARLO car or truck and it came with the regular transmitter that they give everybody with the flat top three knobs two buttons in the power button. You’re probably gonna have range issues. Here’s a little tip that can help you greatly. Take the transmitter apart, inside, you will see the actual antenna wire taped to the inside of the transmitter. What I did was I drilled a little pinhole in the top of my transmitter and pulled that wire through so now it’s on the outside of the transmitter where it belongs. It’s super easy and should take you more than 15 minutesand your range will be way way better

[@adrianwiuk]

Great review and a really nice entry-level controller. I really need to get some foam on the wheel. What did you use on yours? Thanks

[@philiprccars4340]

Wow, a lot has happened in 4 years, the Transmitter actually does come with EPC, but I still have no idea what it does? What is the difference between EPC for the steering servo and Dual Rate steering?

[@cloudburnfpv3626]

Can someone help with how to adjust breaking force on this transmitter if possible. Doesn't break very well even after calibrating. It's on a Tamiya TT 01 chassis. Any help would be greatly appreciated.

[@vibe808]

Razor R/C Thanks man. All your content is so useful. For bashers like me, info from a racer is awesome 😎

[@NSNick]

I bought this and the batteries in the controller need to be replaced every two Weeks; anyone have the same problem?

[@exotikinc3397]

Nope, get some better batteries, not dollar general batteries. I recommend energizer ultimate lithium AA batteries

[@exotikinc3397]

I've had mine for 3 months, and haven't changed the batteries yet

[@NSNick]

@@exotikinc3397 maybe mine is defective, I’ve tried Duracell as well

[@exotikinc3397]

@@NSNick Duracell aren't good unless it's their optimum, and those still aren't that good compared to the energizer ultimate lithium.

[@exotikinc3397]

@@NSNick Try using the ultimate lithium, and if they still die, it's defective

[@Kev7274]

Where is the speed limit adjustment function mentioned in the manual?

[@kentucky4696]

Its the EPA trim, its right bottom knob. Do not turn the top right knob to high or else it will run away or into u like it did me. I took a 1/8 arrma to the shin does not feel good trust me lol.

[@PFinkoloTL87]

Useless since that knob also turns down brake force.

[@AddyRCBuddy]

Exactly what I need. Great review man. Thanks for sharing! 😸😸

[@driverkeithkd]

Someone help me transmitter is stuck with red light and it's in tank mode throttles and turns on channel 1 and 2 and I lost book

[@driverkeithkd]

Stuck in tracked mode and lost book please help

[@strider5795]

@@driverkeithkdtry looking it up I guess

[@enriq51]

Hi, how can I factory reset the configuration? I have a flashing yellow and red light

[@webb6158]

I also have the same issue with my surpass hobby 4 channel transmitter and receiver!!!

[@dauntlessfpv]

You are in tank mode, and low battery

[@dauntlessfpv]

Change back to normal mode

[@wesleymadden8286]

Where is normal mode I'm having same issie

[@dauntlessfpv]

Full reverse, turn it on, and then full throttle, and then back to normal

[@johngallagher9827]

It dose have end adjustments for channel 3 & 4

[@dauntlessfpv]

Yes I don’t like how u can’t for 1&2 tho

[@wilsonsvaletingdetailing9286]

Anything on having a built in fail safe?

[@jonvarga5569]

I am finding that my steering maxes out at roughly a quarter turn on the controller. Do you know if this is a setup issue? The trim controls how far the wheels turn, but with the trim set to 100%, the wheels turn fully when I turn the controller wheel 25% of the way.

[@martins2657]

Hello. I bought two pieces of this radio and few transmitters. On some models like Serpent 1/10 s411 onroad is okay. But when i tried it with enabled gyro on XO-1 i got minimal 2 disconnection in one hour. When i taken Typhon 6S on the track, connection was lost like 8times in one hour. Completely. I think that enabled gyro takes so much sources and transmitter stop response till it is not turned off and powered on again. Its strange behavior. And seems to me only when gyro is enabled so orange led is on. Have you got the similar experiences? I used Dumbo RC on onroad 1/10 without gyro for 4months without any issue. But in models where i wanted to try integrated gyro, it seem it is not a good solution in long term. I just borrow Spectrum DX5 pro from my friend and no issues. So this china can be good, but not for all situations.

[@RallyRanchMotorsport]

Does it have a maximum throttle adjustment? Would be good to be able to turn down for when beginners use it. Or is that what end point adjustmemt is?

[@ciarancdc]

How do you set the failsafe on this radio? It doesn't say in the manual

[@MrMickeysbee69]

I have one and don't like it. I can't find how to set the individual right and left end points for a 2 speed transmission servo on channel 3 or 4. I can only find a way to set the % of the full throw from right to left. So if you can help this would be great. If not then this radio is useless for multiple servos.

[@RazorRC]

There’s no end point adjustment, I mention that in the video.

[@andreasjonsson8075]

What's the one to get most bang for the buck?

[@freddieparrydrums]

Great radio, in all my RC’s including my Kraton EXB

[@roosterrc6519]

Mine came in a plastic bag no box no paper work receiver was tied to remote by the antenna I hope it works better than how it was packaged and sent to me

[@markbutler2741]

Where do you get the foam for the wheel?

[@jasonlemmond3012]

Mark Butler I also want to know

[@ThisIsDavesGarage]

ebay, banggood, look up steering wheel foam grip

[@RazorRC]

I got a video on it now

[@jcrc9051]

Hi Razor RC . Good video! Just got this radio very easy to bind and set gyro . But cant seem to get into program mode I want to calibrate throttle/steering Any tips (yes tried broken english manual) Thanks!

[@almayification]

I can't get it into program mode either

[@dauntlessfpv]

almayification I used the manual and I was able to understand it. It comes with max usage on the channel 1&2. It doesn’t do anything at all to help it or change anything in a good way leave it how it is

[@paulspeiser4882]

the program mode is not for calibration, it switches the the trim and dual rate switches to channels 3&4

[@originalkontrol]

Just picked one of these up for my LC12B build. Figured I’d give it a shot. For $30, why not. If I don’t like it no big deal, go to the GT3C.

[@69jonhill]

I use these for all my rigs. The range and response times are better than anything from Arrma or Traxxas.

[@webb6158]

Hi razor rc, I have a question about this transmitter well actually it's the surpass hobby 4 channel version of this transmitter but idk what I done but now I can't get my wpl c14 truck to work with this transmitter anymore!!! It worked great for like a month used it everyday but then all of a sudden I had a red blinking light on my cheap $10 surpass hobby/no brand esc from Banggood and it would no longer work at all but I had steering still!! I changed my esc now 3 different times with the same kind of cheap esc's and all I get is the same red blinking light on each of them soon as I plug in my battery!!! Then I used a castle micro sidewinder 2 esc in the same wpl c14 truck and I couldn't get it to work for longer then a couple seconds at an extremely low speed and then that esc would cut off and start flashing red so I tried to calibrate the remote to the castle esc and now I can't get receiver to do anything other then just light up but no response not even steering!!! Can you please help me with this?? And I apologise for the long message also!!

[@RazorRC]

I have a feeling it's the battery, not the radio or ESC. Check the voltage on the battery with a cheap lipo alarm or if your charger can tell you, make sure it's at the full voltage. Are you using lipo batteries?

[@webb6158]

@@RazorRC at first I was using just the cheap ass battery packs that the truck came with and then I bought one of the li-ion battery upgrades but it didn't come with a charger but I had bought a cheap imaxRC b3 pro compact charger for 2 and 3 cell lipo batteries awhile back for my wltoys a979 truck I have but it doesn't have a voltage display on the charger and honestly not sure if it is actually charging the li ion battery even though it shows that it is!!! I am fairly new to the whole hobby grade rc hobby but have enjoyed rc my whole life from childhood to now being 34 lol!!!

[@webb6158]

@@RazorRC I feel like an idiot by asking that question but from all the hundreds of video I have watched none of them have actually given me the answer I am needing so the only other way to find out the info I need is to just look like an idiot and ask people the question lol!!!

[@RazorRC]

@@webb6158 no worries, no such thing as a dumb question, doesn't matter who you are there are always people who know more than you or know less! yeah double check the voltage with a $5 voltage checker/alarm and make sure it's fully charged. Some chargers have a time cutoff or mah cutoff that is set too low, so you don't get a full charge and you need to increase it. that's a common problem.

[@webb6158]

Ok I will order one of these lipo checkers/alarms immediately and I sincerely appreciate you taking the time to talk with me about all of this and I have been watching alot of your vids and you have great content!!!

[@RBAERO]

Interesting they claim those two knobs you mention is dual rate as End Points (EPA).

[@kodak_jack]

There is a set up video, but the guy has an accent. It’s not too hard to follow, but .... I didn’t realize it doesn’t have memory for more than one device. It would be worth a lot more if it did.

[@lolof7820]

Hi ! great tip for the direction of the receiver i didnt know. Question does it mean when the transmitter blue light flash clearblue/dark blue ?

[@dauntlessfpv]

Low battery

[@aa240sx]

The sub trim for channel 1 (steering) is opposite of the direction the vehicle or boat is going. How do you correct this?

[@joshuamei7465]

Flip your connectors or reverse on the transmitter

[@LeBlanc10]

also i run 3 cars with one remote. once you bind them it works. just turn on the radio and the car you want to use and it works. will also control multiple at once

[@PeasantNo.471]

Yes, it does🤣but its very hard

[@joshwideman7487]

I bought the 4channel version with 3 xtra rx to run my cars and boats. Trying not to have so many rtr tx to pack around. Is there any reason I could not simply re-bind it when going to another vehicle? Seems simple enough, although some re-trim would be necessary. But 1 servo. So what. Your reasons for saying it can't be for multiple vehicles?

[@RazorRC]

It can, it's just pretty inconvenient to have to re-bind it all the time. You also need to set the dual-rate each time you re-bind.

[@Hotdog80085]

I just got one of these. Anyone know why I would have no reverse after double checking servo/esc wires, rebinding/recalibrating transmitter, and racking my brain?

[@S.Keenan]

Hey man, I've become a bit of a Razor RC groupie, as in I go to you for the final word. So, this or the Radiolink RC4GS? Got both in my basket.

[@RazorRC]

RC4GS

[@S.Keenan]

@@RazorRC Much appreciated.

[@druscanam]

@@RazorRC Are the recivers compatible? I've noticed the R6FG and X6FG look exactly the same. If you are not sure, could you please test for me? I have a few Dumbo RC recivers and would like to know if I can use an upgrade my radio and still use all the Dumbo RC recivers

[@RazorRC]

@@druscanam I tried it, but couldn't get it to bind.

[@druscanam]

@@RazorRC Ok that's a shame 😭 But thanks for letting us know 👍🏻

[@IIIxwaveIII]

Can u provide a link for buying a wheel foam cover?

[@jblaze725]

How big a deal is it that it doesn't have end point adjustment? I don't want to prematurely wear out my servo.

[@RazorRC]

Not a big deal, just turn down the DR

[@jblaze725]

@Razor RC Thanks for the help. I'm currently using the radio that came with my rtr setup and it kind of sucks. If I'm going to upgrade I really do want it to be an upgrade. I actually received it and the steering trim was set way to the right to even out the steering. I thought it should have been centered so I did it myself. Thought all was well and after driving noticed it was now way to the left after I had centered it. Don't know if that is a radio issue, a servo issue, a servo saver issue or something else but I'm hoping to get rid of these types of problems.

[@darranhanlon8709]

So just a question if thats ok? When selecting the gyro mode,, does it stay in gyro mode if yoi turn it off and then back on? Bevause turning the gyro on ebery time would be a pain,, especially if it was in a water propf receiver box! Great vid thanks Thumbs up👍

[@RazorRC]

Darran hanlon happy to answer anything I can, the gyro will stay in that mode even if you power it off.

[@darranhanlon8709]

@@RazorRC cheers Thanks for that👍👍

[@martij82]

Got one brand new for my slash worked great until the velineon system crapped out. Replaced with newer version vxl 3s, using same transmitter and receiver and get a blinking green light. Reprogrammed transmitter and same results. Is it not compatible with the new vxl 3s? Any help please would be appreciated.

[@RazorRC]

recalibrate the full throttle/brake on the ESC

[@martij82]

@@RazorRC ill recalibrate it again but ive done it a few times and it still blinks green. It also blinks when I threw in an axial tx and rd also. I did try a fly sky setup and that seemed to work but fly sky rx is damaged, goes out of range after about 40 feet out. I really dont want to spend over 100 dollars for a traxxas tx and rx there is gotta be a way to make this dumbo work. Ill try again thanks for the advice.

[@xx-----------xx873]

@@martij82 Did you get it to work? I know it's been over a year but I'm in the same boat haha

[@martij82]

@@xx-----------xx873 No never I just got an original Traxxas transmitter and receiver that my buddy gave me and its working fine. Maybe the dumbo one crapped out I guess.

[@NepDouble07]

Do you know what the max BEC voltage supported by the receiver is?? I have this exact setup in my outcast 6s, with a mamba monster x. Just ordered a 7.4 volt servo. My mamba monster x has a 7.5 volt bec setting.

[@paulspeiser4882]

10 volts is what it says in the manual

[@planker]

I ordered the Eachine TX6, it looks just like the dumbo. will dumbo receivers work with the TX6? 1/4/22

[@RazorRC]

no idea

[@sammym.belfastchild]

Thanks again for sharing my friend, great content and info .. Cheers 🥂 Great job 🖖 Tc , stay safe n RC on !!

[@IowaBudgetRCBashers]

You can bind up to 10 receivers to 1 single dumbo radio.

[@Commander_ZiN]

Nice review. I'm not sure what's wrong with your nails from the vid but see a chemist or maybe your doctor. It looks like it could be nail fungus. You can fix it with a nail file and and a topical ointment over several months. I'm no doctor so it might be something else, it just looks similar to something I've seen before. worth while getting it checked out if you haven't already though. Thanks for the vid, best review so far I've seen for the dumbo tx. I do wonder if the steering trim has a dentent though. I like the door though, I like to set the trim to neutral and not bump it and set the steering on the car itself. My current controller I keep bumping it.

[@dustinkarrick7819]

Seems like you know a lot about the DumboRc X6! Any idea how to reverse the throttle direction? I've tried two different transmitters and the switch doesn't switch the direction.

[@LeBlanc10]

the switch works on mine, sometimes you have to turn off and restart to get it to change.

[@dustinkarrick7819]

@@LeBlanc10 Thanks for the tip! Tried four different brand receiver/transmitter combos, connecting the hobbywing 120 EZ to the computer to switcch the settings and still couldn't reverse the direction. Solved by modifying the diff housings and flipping the diffs. Way more work when you only expected to flip a switch on the transmitter! The Dumbo transmitter works fine, the ESC didn't want to work right.

[@LeBlanc10]

@@dustinkarrick7819 one more thing to keep in mind in case you ever need to do that again. if you are running brushed or brushless sensorless motors you can switch the wires around. Any two of the three wires. And the motor will rotate the opposite direction . matching the wires correctly Only truly matters if you are running a sensored system.

[@dustinkarrick7819]

@@LeBlanc10 Absolutely! This was intended to be a sensored setup. It did work unplugging the sensor wire and switching the wires. But what's the point in having a sensored ESC and Motor if you're not going to use em!

[@tugrasarchive]

i want to have the best range with my car (2.4ghz) what can you recommend? The range should be very long, have FPV

[@CmwSpeedrunUk]

Great video did you like the range

[@rickb-73]

What does channel 4 control?

[@RBAERO]

Do you have a bangood link for this foam to put on the steering wheel?

[@jvadv231]

The radiolink receiver are compatible on that transmitter?

[@rcaddictgarage]

I would like to know too?

[@druscanam]

Yes and vise versa, for someone who already has a few Dumbo RC recivers, an RC4GS would be an obvious upgrade for someone looking get a better more functional remote who already has a few Dumbo RC receivers

[@kristoffervergara1982]

I got the 4 channel version do i have to program the other 2 channel to be able to use them?... I'm just installing led lights. thanks.

[@IronT0Steel]

What's the best thing to do if there are no end point adjustments for steering ?

[@paulspeiser4882]

zero the servo as normal turn the dual rate down to about 50% slowly turn the dual rate up whilst turning the wheel from left to right until the steering just binds then turn the dual rate back a little. this is a best fit, as stated in the vid you will probably end up with more steering one way tan the other. Its also one of the problems with multiple binding the radio i.e. each model would need a different setting

[@imachef1979]

How do you program lets say the read as self righting to the dumborc?

[@RazorRC]

Self righting is a feature of the Traxxas receiver. If you change it to a DumboRC, you won’t have it anymore.

[@imachef1979]

Oh gotcha, thanks I appreciate the quick response

[@Black_Lab_LA]

My steering trim is actually reversed. Any fixes?

[@RazorRC]

I’m guessing your steering switch is reversed? Nothing you can do about it.

[@kj8779]

I have mine connected up and everything is working but when I pull the throttle truck move in reverse why is this

[@RazorRC]

Most likely your motor wires are reversed from the ESC. Or you need to switch the Normal/Reverse on channel 2.

[@NeoJ4K3]

how to setup failsafe for nitro?

[@jamesgeorge609]

I like that radio. But where did you get the foam for the wheel?

[@RazorRC]

I've got a how-to video for the foam wheel posted today.

[@parklifepep8056]

It does have end points adjustments at least for the steering

[@RazorRC]

how do you get to them, 'cause there's no knob for it

[@parklifepep8056]

@@RazorRC I'll post a photo/ vid later. The knobs are under the top cover

[@parklifepep8056]

Just behind the two knobs that are visible

[@parklifepep8056]

At 56 sec, you can see the cover is opened on the manual

[@parklifepep8056]

Hard to beat for the money with gyro, 6 channels, mad response and distances

[@islandrc-duke1972]

great review thanks for sharing

[@VeselinMilev]

Will it work with 12v DC 10s Ni-Mh battery?

[@luizdomingosdesouzadomingo3102]

Precciso saber como alimentar o receptor, pois as inlustracoes moatram as 6 saidas e não mostra como alimentar o receptor.

[@breakinstuffandlikingit6821]

My rating for the manual is 0, cause I didn't get a manual with either of the units I received. I did eventually find the manual on some FCC site. Google um-4307855. Pdf

[@jotcw81]

Great, thx man!

[@jasonlemmond3012]

BreakinStuffAndLikingIt how do you bind it is it where you just hit that button or how’s it done

[@kramfam7466]

@@jasonlemmond3012 turn on transmitter. Hit tiny button on receiver. It will quickly flash. When it stops it should be paired

[@krodyssey4770]

Does it have fail save

[@145.]

can i use the gyro with a 4 channel Transmittler?

[@tomv3361]

No

[@excoursion]

Hi, how do we set the failsafe?

[@KayezTP]

Factory set, when it disconnects it sets servos to default position so throttle etc isn’t engaged

[@colind216]

Are the two knobs on top full range?

[@philthayer4087]

Nice review! Do you know if the Receiver has a PPM or Sbus out pin? I'd like to use it with a flight controller. Thanks.

[@abood533]

When I turn off the transmitter while the car is on, sometimes its goes crazy full throttle. Anyone faced the same thing?, or I just have a defected unit?

[@RazorRC]

Ahmed try setting the fail safe on your car. If it loses signal (like your turn off the car), it goes to its preset failsafe.

[@abood533]

@@RazorRC Does this happens to you too? Can you tell me how to set this fail safe. Im just worried if my car gets out of range and start acting up

[@RazorRC]

Ahmed try binding it again, it’s in the manual. Basically just hit the button on the receiver one time and it should flash

[@abood533]

@@RazorRC Will do that and report back. But still Im wondering if someone else have the problem. Have you tried switching pff the transmitter while the car/boat is still on. You have to do it may times for it to happen

[@abood533]

Just tried rebinding. Same thing!

[@brentcrownover7322]

I've heard it has model memory? Just add receivers to multiple cars. Is this true?

[@iforce2d]

Where did you hear that...

[@RazorRC]

No

[@Appman36]

Kevin talbut RC you tube,he does unboxing, and said that you can add up to twenty receivers,there a switch on the receiver and turn in controller and they just bind,only one car at a time,even has 2settings for normal steering and a mode for tanks Bacco trucks,etc

[@LawrenceTimme]

Seems decent for the price.

[@kevinthemighty4378]

13:00

[@ScottMcLinden]

You would lose your TSM on your Traxxas right?

[@RazorRC]

Scott McLinden yes, you have to change out the receiver too

[@johanjacobo376]

Can you use this controller on a nitro rc ?

[@majorleaguesurfcasting3620]

It's doesn't work with the VXL3, FYI.

[@tyagoh101]

Does the flysky gt5 worth the extra? I am about to buy this one

[@RazorRC]

yes I think it's worth the extra $

[@bluetrainer3549]

Question, can this radio be binded with multiple receivers?

[@RazorRC]

yes, but you're going to have to set your trim and dual-rate every time you switch cars

[@bluetrainer3549]

@@RazorRCthanks for the answer, I am cool with that is the same vehicle I just need a transmitter that could work on both

[@6ixth6enz17]

Literally identical to ETRONIX PULSE EX6G 6ch FHSS !

[@kentucky4696]

I mounted the receiver vertical in the stock receiver box on my arrma notorious... So I guess that explains why my gyro hasn't been working lol. Rookie mistake haha oh well its a basher anyways just got the radio to upgrade the crappy stx2 that came with it.

[@sMoKeN904]

Can't wait to get mine. Should've spent more an got it off Amazon instead of bang good lol

[@jlo1446]

Do you know the name of the official site of Dumbo ?

[@jlo1446]

I found :) www.dumborc.com/en/

[@allenverelley8452]

Hey, I recently got this receiver/transmitter set up. I put it in my arrma senton 3s Blx which has the blx100esc. I installed it with the controls and Gyro working perfectly for about one minute until everything halts and the ESC starts blinking red. I made sure to do a factory reset, and ensure that I am working with a full battery in both the controller and the car. Several times now, same result. Now when I hold the send button and turn it on it just blinks/chirps and won’t stop until I turn it off. Any help would be greatly appreciated!

[@thisismyyoutubename1214]

Same with my granite 3s BLX. How did you fix it?

[@kainscustoms]

Hi does this have a failsafe

[@simonwood8685]

Yes I turned my radio off while running and my rc stops

[@ajgreen868]

Wish it had a high medium and low cause my kids drive my car.

[@RazorRC]

Just turn down the throttle dual-rate. It's the right bottom knob.

[@usamanawaz1126]

What's it's control range mate?

[@tomv3361]

About 500m, more than enough

[@thejeepinrealtor5742]

I raced for the first time this weekend. Had this bound to a Tekno ET48.3. (Yes I now know that’s not the class to start with 😂) I really don’t want to spend more money on a radio when this one has such fast response / low latency and good range. Are EPA worth spending 300 minimum on? Your thoughts pls? :) Thx!!

[@cwatson42785]

Questionable name if you ask me lol. Guess dummy rc was taken?

[@miyamotosan972]

Is the receiver Waterproof?

[@RazorRC]

no

[@ferv888]

I think they mean the type of plastic is ABS

[@charlesdipanni3725]

Every time you trying to remote on and find whatever car you have on multiple vehicles

[@Bruce_Warren]

Nice job!

[@Das-Veilchen-X]

Cool Video Bro 😎✌🏻

[@johnnoble01]

Clever marketing ploy calling it Dumbo. Memorable.

[@GARBO96]

No it's the name of the manufacturer

[@PFinkoloTL87]

I am disappointed by its range. Range tested mine out in the middle of nowhere.