Dummy 13 | Assembly

  Рет қаралды 398,698

Pro3DTinkering

Pro3DTinkering

Күн бұрын

Пікірлер: 910
@eyesopen2995
@eyesopen2995 23 күн бұрын
Thank you! I'm a 77 year old Granny with arthritis and I was trying to make this for my 4 year old grandson's Christmas stocking. I have just finished it, and the last bit, the shoulder tab, the lugs broke off, but I can stick it on and it won't affect any movement. My fingers are sooo sore, lol, but I was determined, I used pliers to press the bits together as I have no finger strength. I could not have done it without your video, so thank you again!!!!
@Pro3DTinkering
@Pro3DTinkering 23 күн бұрын
Thank you for your feedback! I’m so happy to hear that it was helpful
@Catvr805
@Catvr805 20 күн бұрын
Hey you know you can buy this
@Blox_fruits_pro12010
@Blox_fruits_pro12010 14 күн бұрын
It helped me to
@rizusplaychannel
@rizusplaychannel 13 күн бұрын
Woooooooooooooooooooooo
@eyesopen2995
@eyesopen2995 13 күн бұрын
@@Pro3DTinkering 🌷
@Scissor.s
@Scissor.s 7 күн бұрын
I started to give up when the head was attached, but after watching your video I didn't have any more trouble, I followed you using the gloves. And my fingers didn't hurt and this video really helped!
@Pro3DTinkering
@Pro3DTinkering 7 күн бұрын
Thank you! Happy to hear that it helped 😃
@goopiezr9038
@goopiezr9038 Ай бұрын
I don’t even have a freshly printed dummy 13 let alone a 3D printer, but this is satisfying to watch, if I do get one then I will come back to this vid without a thought
@Pro3DTinkering
@Pro3DTinkering Ай бұрын
Thank you, appreciate that!
@Liampatrick-e3t
@Liampatrick-e3t 15 күн бұрын
Do not 3d print it, the file sucks.
@Pro3DTinkering
@Pro3DTinkering 15 күн бұрын
@@Liampatrick-e3t what exactly?
@goopiezr9038
@goopiezr9038 15 күн бұрын
@@Liampatrick-e3t don’t even have a 3d printer
@scienceman792
@scienceman792 Ай бұрын
What material did you use?, i used pla and it was such a pain. Any tips?
@Pro3DTinkering
@Pro3DTinkering Ай бұрын
I used PETG for frame parts and PLA for armor
@Pro3DTinkering
@Pro3DTinkering Ай бұрын
PLA not gonna work for the frame
@scienceman792
@scienceman792 Ай бұрын
@@Pro3DTinkering thanks, really appreciate it👍
@Pro3DTinkering
@Pro3DTinkering Ай бұрын
@@scienceman792 You are welcome!
@Knexstuff-thrillcrafts
@Knexstuff-thrillcrafts Ай бұрын
Omg I ordered one and heard it was hard to assemble! Ty for the tutorial I’ll give updates when it’s done!
@Pro3DTinkering
@Pro3DTinkering Ай бұрын
Keep me posted, thank you!
@Knexstuff-thrillcrafts
@Knexstuff-thrillcrafts Ай бұрын
@ ofc!
@Knexstuff-thrillcrafts
@Knexstuff-thrillcrafts Ай бұрын
@@Pro3DTinkering I got it pre assembled but it’s very nice and high quality! I’ve managed to make two stop motion vids with the t13 and a stikbot too!
@DmitriTvetkov
@DmitriTvetkov Ай бұрын
@@Knexstuff-thrillcrafts That's awesome! From where did you order it?
@Knexstuff-thrillcrafts
@Knexstuff-thrillcrafts Ай бұрын
@ amazon
@1xOut-k5d
@1xOut-k5d 5 ай бұрын
I ordered myself one such figure (female) tell me please the assembly process is different from what is shown in the video or not ???
@Pro3DTinkering
@Pro3DTinkering 5 ай бұрын
It should be the same, I haven't tried to assemble the specific model you talking about, but so far as I can see the only difference is the armor style
@1xOut-k5d
@1xOut-k5d 5 ай бұрын
Yes, the differences are only in the breastplate, it just seemed to me that because of its structure, there will be differences in the assembly
@Pro3DTinkering
@Pro3DTinkering 5 ай бұрын
@@1xOut-k5d when you gonna get it?
@1xOut-k5d
@1xOut-k5d 5 ай бұрын
In about 1-2 weeks
@Pro3DTinkering
@Pro3DTinkering 5 ай бұрын
@@1xOut-k5d keep me posted, I will be happy to help
@Supr867
@Supr867 6 ай бұрын
Hi, im having a little bit of trouble, i 3d printed the parts, but they just wont fit (i grabbed the original file, sliced it and printed it)
@Pro3DTinkering
@Pro3DTinkering 6 ай бұрын
Hi, that’s strange, considering that you used the original file without adjustments. Which filament did you use?
@zizzy7583
@zizzy7583 6 ай бұрын
2:25 this part is super hard for me, when I try to put it in it doesn’t go all the way through
@Pro3DTinkering
@Pro3DTinkering 6 ай бұрын
Do you mean the connection with the armour?
@zizzy7583
@zizzy7583 6 ай бұрын
@@Pro3DTinkering yeah, but I finally figured it out, thanks :D
@Pro3DTinkering
@Pro3DTinkering 6 ай бұрын
Great! Np)
@Tmntking
@Tmntking 4 ай бұрын
I'm having this issue it won't connect​@@Pro3DTinkering
@ApelKayaknya
@ApelKayaknya 3 ай бұрын
Thats right
@pastorpaulobif
@pastorpaulobif 6 ай бұрын
Thank for the help i am brazilian but you content is very very amazing
@Pro3DTinkering
@Pro3DTinkering 6 ай бұрын
Thank you!
@Um_dummy_edits
@Um_dummy_edits Ай бұрын
Também sou brasileiro
@optimusprowler6
@optimusprowler6 Ай бұрын
@@Um_dummy_editsWe got brazilian phonks along with u
@Um_dummy_edits
@Um_dummy_edits Ай бұрын
​@@optimusprowler6I know, you're English, right?
@Nexus7141
@Nexus7141 Ай бұрын
this is the best tutorial I've ever seen, i watch a lot of video to how to assemble the pieces but i didn't understand it but this video helped me a lot
@Pro3DTinkering
@Pro3DTinkering Ай бұрын
Thank you for your feedback!
@Soggy_Fox
@Soggy_Fox 4 ай бұрын
Amazing tut ! ( also I think the best and most satisfying part is the torso 😌) I always have fun putting it together and this tut was clear I’d recommend this very much :D Also idk if you tried but the asmr on this was AWSOME so yeah it was helpful and relaxing:O
@Pro3DTinkering
@Pro3DTinkering 4 ай бұрын
Thank you for your feedback and kind words! About the asmr, it’s just a coincidence😁
@dannydwyer7585
@dannydwyer7585 Ай бұрын
@@Pro3DTinkeringur gloves was reminding me of slime
@Itsme_themeow
@Itsme_themeow 14 күн бұрын
thanks for helping! thank you for tutorial😊
@Pro3DTinkering
@Pro3DTinkering 13 күн бұрын
Thank you for watching!
@musmay2011
@musmay2011 3 ай бұрын
Its working, thank you so much for this video ❤
@Pro3DTinkering
@Pro3DTinkering 3 ай бұрын
Thank you!
@WhippetGood27
@WhippetGood27 16 күн бұрын
this was super helpful. thank you. this guy disserves more love
@Pro3DTinkering
@Pro3DTinkering 15 күн бұрын
Thank you!
@michaelbastedenbeck868
@michaelbastedenbeck868 3 ай бұрын
Great!!!! I'm a visual learner and this helped a lot. No problem with assembly! Thanks my son loves it
@Pro3DTinkering
@Pro3DTinkering 3 ай бұрын
Thank you for your feedback! I am really happy that it was helpful
@Shadowinthedark-1
@Shadowinthedark-1 5 ай бұрын
Thanks for your help and WE ARE NEVER TO OLD TO PLAY WITH ACTION FIGURES
@Pro3DTinkering
@Pro3DTinkering 5 ай бұрын
You are welcome!
@Pro3DTinkering
@Pro3DTinkering 5 ай бұрын
Yeah 😁
@AvrylleS
@AvrylleS 3 ай бұрын
Bro thanks for helping us we love you and i love action figure stickman❤❤
@Pro3DTinkering
@Pro3DTinkering 3 ай бұрын
@@AvrylleS thank you for your feedback!
@Zah-xi7ip
@Zah-xi7ip 2 ай бұрын
For sure
@Samuelhde
@Samuelhde Ай бұрын
Well, i managed to assemble the torso, the head, and some things. But i can't get the leg one. I can't get it on my arm, what to i do?
@PumpkinPubg0
@PumpkinPubg0 4 ай бұрын
Thank you, i almost lost hope cause i cannot put the head, but when i rewatched it a couple of times, i finally got it. Thank you!
@Pro3DTinkering
@Pro3DTinkering 4 ай бұрын
That's great😀
@Pro3DTinkering
@Pro3DTinkering 4 ай бұрын
Happy to hear that it helped
@PumpkinPubg0
@PumpkinPubg0 4 ай бұрын
@@Pro3DTinkering but seriously, seriously. Why does some parts look different from mine?
@Pro3DTinkering
@Pro3DTinkering 4 ай бұрын
Did you buy or print?
@PumpkinPubg0
@PumpkinPubg0 4 ай бұрын
@@Pro3DTinkering buy
@susanin5249
@susanin5249 4 ай бұрын
Самая толковая инструкция, что есть на KZbin! Большое спасибо!
@Pro3DTinkering
@Pro3DTinkering 4 ай бұрын
Thank you for your feedback and kind words
@Envixty1243
@Envixty1243 16 күн бұрын
This is the best tutorial I’ve ever seen
@Pro3DTinkering
@Pro3DTinkering 16 күн бұрын
Thank you!☺️
@angieayala4069
@angieayala4069 4 ай бұрын
It’s really helpful
@Pro3DTinkering
@Pro3DTinkering 4 ай бұрын
Happy to hear that! 🙂 Thank you for watching!
@angieayala4069
@angieayala4069 4 ай бұрын
I take it back, and the head keeps on falling off
@AltheaLavelle
@AltheaLavelle Ай бұрын
Thanks man you really helped me👍😁
@Pro3DTinkering
@Pro3DTinkering Ай бұрын
Happy to hear that, thanks for watching!
@Sn0wm4nX
@Sn0wm4nX 6 ай бұрын
Thanks for the video, Amazing print! Can you let us know what you used for frame and armor. PETG/PLA? Also what brand, nice colours!!!!
@Pro3DTinkering
@Pro3DTinkering 6 ай бұрын
Thank you for your feedback, I used Bambu PETG for both frame armour
@Torres.dios.14
@Torres.dios.14 12 күн бұрын
No puedo esperar a navidad ya siento las mariposas o la emocion de tener uno en mis manos😊
@McDylanTubat
@McDylanTubat Ай бұрын
It made my fingers hurt and yet i still cant assemble them this is probably one of the hardest and annoying figures yet
@redly4472
@redly4472 20 күн бұрын
Yes! I had to glue a lot of parts together, after breaking them during assembly
@LeandroAlegrini
@LeandroAlegrini 10 күн бұрын
Euqueru
@ParasiteFlamesYT
@ParasiteFlamesYT 2 күн бұрын
But its so Easy?
@Funnybananagt
@Funnybananagt 6 сағат бұрын
@@ParasiteFlamesYTdude the head part it won’t fit in
@jaenusalcos6264
@jaenusalcos6264 Сағат бұрын
This is my first time doing this so this helped alot
@rolucraft20
@rolucraft20 15 сағат бұрын
Wow good job! You are better than others!
@Pro3DTinkering
@Pro3DTinkering 10 сағат бұрын
Thank you 😊
@eduardtvetkov6321
@eduardtvetkov6321 7 ай бұрын
Nice job! It'clear and interesting.
@Pro3DTinkering
@Pro3DTinkering 7 ай бұрын
Thank you!
@erzalynmelodysuyat366
@erzalynmelodysuyat366 2 ай бұрын
thank you brother for this video it is helpful to people who dont knowto how to assembol this dummy 13 like me other wise i dont know how to assembol it and thank you so much and the video is to satisfiying
@Pro3DTinkering
@Pro3DTinkering 2 ай бұрын
Thank you for your feedback and kind words!
@DODOS-ek
@DODOS-ek 2 ай бұрын
​@@Pro3DTinkeringmaster I'm to much an idiot to do it my self
@arbensoon4259
@arbensoon4259 5 ай бұрын
Wow so amazing
@Pro3DTinkering
@Pro3DTinkering 5 ай бұрын
Thank you!😊
@SStrangerr_
@SStrangerr_ Ай бұрын
THANK YOU SO MUCH BROO, THE PACK I BOUGHT HAD A INSTRUCTION PAPER THAT MADE ALMOST NO SENSE AND IT MADE MY FINGERS HURT SO MUCH. But thanks to you i finally made my dummy/titan 🔥🗣
@Pro3DTinkering
@Pro3DTinkering Ай бұрын
Thank you for your feedback and kind words!
@Abacongaming
@Abacongaming 3 ай бұрын
Its so working bro thank
@Pro3DTinkering
@Pro3DTinkering 3 ай бұрын
Thank you!
@rainbowmeme7794
@rainbowmeme7794 3 ай бұрын
Sarcasm 💀
@renatobarredo5264
@renatobarredo5264 4 ай бұрын
This video is sooo satisfying and thanks for this video
@Pro3DTinkering
@Pro3DTinkering 4 ай бұрын
Thank you for watching!
@ЛеонидБочарников
@ЛеонидБочарников 7 ай бұрын
А где вы их покупаете?
@Pro3DTinkering
@Pro3DTinkering 7 ай бұрын
You can find them on Etsy
@linavillaquiran-hl3qt
@linavillaquiran-hl3qt 7 ай бұрын
dik
@Амогус_фильм
@Амогус_фильм 6 ай бұрын
Или озон
@ДмитрийКвашнин-и5э
@ДмитрийКвашнин-и5э 6 ай бұрын
​@@Амогус_фильмя на озоне заказал там доставка долгая
@sengveth530
@sengveth530 5 ай бұрын
How did you do it at 5:51!
@Pro3DTinkering
@Pro3DTinkering 5 ай бұрын
Just make sure that you aligned the armour part with the flat side of the frame piece, please keep me posted
@Yoichirox
@Yoichirox 6 ай бұрын
Now i know how to construct a dummy 13 tysm
@Pro3DTinkering
@Pro3DTinkering 6 ай бұрын
Thank you for watching!
@onepiecelegend-cm9sn
@onepiecelegend-cm9sn 2 ай бұрын
Thanks alot my cousin is bying me two but don't they come pre assembled on the official website tey said it comes ore assembled
@aditzmwemwek
@aditzmwemwek 4 ай бұрын
thank you, finally I can assemble it❤🎉
@IsisPaolaRodriguez
@IsisPaolaRodriguez 27 күн бұрын
I follow all the steps but... Is it normal that some pieces are loose and some joints are loose???
@Pro3DTinkering
@Pro3DTinkering 27 күн бұрын
It’s all about the filament used for printing
@Амогус_фильм
@Амогус_фильм 6 ай бұрын
I love dummy13
@norijeanpamansag4698
@norijeanpamansag4698 2 ай бұрын
My problem is i cant connect the head
@Pro3DTinkering
@Pro3DTinkering 2 ай бұрын
Did you print of buy the model?
@almondjoycedevenecia8432
@almondjoycedevenecia8432 6 ай бұрын
Love the design of this figures
@Pro3DTinkering
@Pro3DTinkering 6 ай бұрын
Yeah, me either
@hearty.love.healthy265
@hearty.love.healthy265 Ай бұрын
Thank you. I managed to assembled my children figurine. Good tutorial
@Pro3DTinkering
@Pro3DTinkering Ай бұрын
Thank you!
@OlgaTvetkova
@OlgaTvetkova 7 ай бұрын
Great job!!!
@Pro3DTinkering
@Pro3DTinkering 7 ай бұрын
Thank you!
@СветланаПилипенко-э4н
@СветланаПилипенко-э4н 6 ай бұрын
🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🇸🇮🇷🇺🇷🇺 3:47
@IlyasFauzi06
@IlyasFauzi06 5 ай бұрын
9:31 It's very difficult bro, you have to use internal strength😢
@Pro3DTinkering
@Pro3DTinkering 5 ай бұрын
It might be difficult something to snap those parts depending on the filament used
@infinix_space
@infinix_space 5 ай бұрын
If you write that it doesn't work for you, it is worth checking whether the frame parts are not made of PLA, they must be printed from ABS, ASA or PETG
@Roman-z5s
@Roman-z5s Ай бұрын
Thanks for the tutorial❤🎉
@keidenuy2247
@keidenuy2247 6 ай бұрын
Asmr video because of the gloves💀
@French_fries505
@French_fries505 5 ай бұрын
Lol
@brandoncampbell4831
@brandoncampbell4831 5 ай бұрын
I can't snap the lower piece on 1:42
@Pro3DTinkering
@Pro3DTinkering 5 ай бұрын
It doesn't come in? Or the ball joint is too low?
@brandoncampbell4831
@brandoncampbell4831 5 ай бұрын
Idk the ball joint is perfect idk
@Pro3DTinkering
@Pro3DTinkering 5 ай бұрын
Just make sure you took the right frame part for lower piece 1:15
@brandoncampbell4831
@brandoncampbell4831 5 ай бұрын
Yeah I did that but I have this the thingy to and got it all done but it just the lower piece popping out
@mamammsewer4701
@mamammsewer4701 6 ай бұрын
i love the hand asmr
@ЕленаОстрикова-б7п
@ЕленаОстрикова-б7п 4 ай бұрын
Thanks! It was very useful!
@dashdemberelgantulga4037
@dashdemberelgantulga4037 7 ай бұрын
ITS NOT WORKING
@Pro3DTinkering
@Pro3DTinkering 7 ай бұрын
Could you please specify what exactly?
@kingjcsansgamer904
@kingjcsansgamer904 6 ай бұрын
​@@Pro3DTinkering Me the hook thing
@joelitonalmeidajoeliton2389
@joelitonalmeidajoeliton2389 6 ай бұрын
Esse cara é um GENIO
@Johnspiderteen
@Johnspiderteen 6 ай бұрын
this dumb peoples can't build that an guide is her
@ProgramAndNectar
@ProgramAndNectar 6 ай бұрын
Ur supposed to snap it on​@@kingjcsansgamer904
@virajkishore6960
@virajkishore6960 3 ай бұрын
I did the same but I had like bluegreen combination figure and build it in a runner gate
@cabritochoroso
@cabritochoroso 2 ай бұрын
Dude, you helped me a lot, thanks
@Pro3DTinkering
@Pro3DTinkering 2 ай бұрын
Happy to hear that it helped, thank you for watching!
@azriffbinmohdmuzammilmoe2323
@azriffbinmohdmuzammilmoe2323 Ай бұрын
i got a piece stuck how do i get it out😭😭😭
@Pro3DTinkering
@Pro3DTinkering Ай бұрын
Which part?
@maribell.salinas4409
@maribell.salinas4409 Ай бұрын
either Im too weak or the pieces too small I cannot do it
@Pro3DTinkering
@Pro3DTinkering Ай бұрын
Which part?
@EddieMatador
@EddieMatador 6 ай бұрын
Hi there, i am having trouble putting the little piece on my son has been begging me to put it on so any tips?
@Pro3DTinkering
@Pro3DTinkering 6 ай бұрын
Hi, could you please specify which one?
@xchloexxyt
@xchloexxyt 5 ай бұрын
​@@Pro3DTinkering I can do the hook thing!!
@xchloexxyt
@xchloexxyt 5 ай бұрын
cant
@Pro3DTinkering
@Pro3DTinkering 5 ай бұрын
@@xchloexxytarms?
@Pro3DTinkering
@Pro3DTinkering 5 ай бұрын
@@xchloexxyt or knee joint?
@Zachoro
@Zachoro 4 ай бұрын
None of the pieces fit Btw just asking but is that 20 cm
@Pro3DTinkering
@Pro3DTinkering 4 ай бұрын
Yes, it’s 150% of the original size
@MrGoldenDraco
@MrGoldenDraco Ай бұрын
Can i do both body and armor with ASA?
@Pro3DTinkering
@Pro3DTinkering Ай бұрын
I haven’t tried with ASA, can’t say exactly, sorry) but you can find all the information in description
@Robloxbilly77
@Robloxbilly77 5 ай бұрын
I love your vids
@Pro3DTinkering
@Pro3DTinkering 5 ай бұрын
Thank you so much! 😊
@spinecontratos3913
@spinecontratos3913 2 ай бұрын
this is possible in PLA filament ?
@Pro3DTinkering
@Pro3DTinkering 2 ай бұрын
You can use PLA for the armor, for the frame it's better to use at least PETG
@calvinietivieyepie9494
@calvinietivieyepie9494 3 ай бұрын
I’m about to get mine on Wednesday and boy am I excited!
@Pro3DTinkering
@Pro3DTinkering 3 ай бұрын
That is great!
@Pro3DTinkering
@Pro3DTinkering 3 ай бұрын
From where did you order it?
@calvinietivieyepie9494
@calvinietivieyepie9494 3 ай бұрын
@@Pro3DTinkering I ordered it from Amazon, why?
@Pro3DTinkering
@Pro3DTinkering 3 ай бұрын
​@@calvinietivieyepie9494 just wondering🙂
@lucyfrias7331
@lucyfrias7331 3 ай бұрын
What color
@Kucing_AK47
@Kucing_AK47 4 ай бұрын
4:00 at the mini things its hard for me
@Kucing_AK47
@Kucing_AK47 4 ай бұрын
Im use my teeth and my hand to do it😂l
@Kucing_AK47
@Kucing_AK47 4 ай бұрын
Qrong emoji
@Kucing_AK47
@Kucing_AK47 4 ай бұрын
😭
@Pro3DTinkering
@Pro3DTinkering 4 ай бұрын
You meant the joint which connects head and neck?
@La.Jupo_jacovin
@La.Jupo_jacovin 4 ай бұрын
YEAH EXTACTLY THAT FUXING HARD TO PUT IN THE SLOT
@2kPotatoKing
@2kPotatoKing 5 ай бұрын
Did you get it on the official site because u are not supposed to build it it is supposed to come in already built
@Pro3DTinkering
@Pro3DTinkering 5 ай бұрын
I've printed both of them😎
@2kPotatoKing
@2kPotatoKing 5 ай бұрын
@@Pro3DTinkeringyeah u are 100 % a bot
@SlowBurn4200
@SlowBurn4200 3 ай бұрын
HOW?​@@2kPotatoKing
@SlowBurn4200
@SlowBurn4200 3 ай бұрын
Also the "official site" is just dropshippers and the real on is the 3d printed ones
@2kPotatoKing
@2kPotatoKing 3 ай бұрын
@@SlowBurn4200 did u buy a fake
@Chill_guyhere
@Chill_guyhere 5 ай бұрын
I love ur vids😃
@Pro3DTinkering
@Pro3DTinkering 5 ай бұрын
Thank you!
@JosephGenne
@JosephGenne 3 ай бұрын
I love this video it was so satisfying with the clicks
@Pro3DTinkering
@Pro3DTinkering 3 ай бұрын
Thank you!😊
@JosephGenne
@JosephGenne 3 ай бұрын
@@Pro3DTinkering You're welcome
@summeroman2228
@summeroman2228 5 ай бұрын
And ware do you get them?😊
@Pro3DTinkering
@Pro3DTinkering 5 ай бұрын
3D printed 😁
@Majthegamer4
@Majthegamer4 2 ай бұрын
that is cool you are so good at this
@Pro3DTinkering
@Pro3DTinkering 2 ай бұрын
Thank you!😊
@anggitawulan3898
@anggitawulan3898 3 ай бұрын
how to disassemble thigh piece? its like welded shut
@Pro3DTinkering
@Pro3DTinkering 3 ай бұрын
Did you assemble the opposite way?
@GreenGhost38
@GreenGhost38 15 күн бұрын
So my sister good one of thses dummies and a spiderman for from the creator of this video witch lives in my neighborhood and I'm building this in my room it is harder than it looks but the end result is really cool love your videos keep it up
@Pro3DTinkering
@Pro3DTinkering 15 күн бұрын
Thank you!
@Samuelhde
@Samuelhde Ай бұрын
And there are also the arm and the legs pieces that don't go all the way, help me
@Pro3DTinkering
@Pro3DTinkering Ай бұрын
Just follow step by step
@YobanaPacheco-x3h
@YobanaPacheco-x3h 7 күн бұрын
En dónde lo compraste
@Pro3DTinkering
@Pro3DTinkering 7 күн бұрын
3d printed
@planetsonaria335
@planetsonaria335 5 ай бұрын
Howcome this one seems so big compared to the other ones?
@Pro3DTinkering
@Pro3DTinkering 5 ай бұрын
The green one is printed in its original size and the purple 150%
@alejandraalcaraz3535
@alejandraalcaraz3535 6 ай бұрын
thanks so much the funny thing is that right after i showed it to my dad he accidentally broke it😂😂😂
@Pro3DTinkering
@Pro3DTinkering 6 ай бұрын
😁
@Goofymonke_vr239
@Goofymonke_vr239 5 ай бұрын
I love ur vids I even watched your dummy 13 k9 video
@Pro3DTinkering
@Pro3DTinkering 5 ай бұрын
Thank you for watching!
@AdemarAvila-t9t
@AdemarAvila-t9t 5 ай бұрын
It helps but my fingers hurt when I put the legs together or the arms
@Pro3DTinkering
@Pro3DTinkering 5 ай бұрын
Yeah, some of the part might fit tight depending of the filament
@AdemarAvila-t9t
@AdemarAvila-t9t 5 ай бұрын
Thanks
@Pro3DTinkering
@Pro3DTinkering 5 ай бұрын
@@AdemarAvila-t9t np, the next assembly should be easier
@Linyuho
@Linyuho 29 күн бұрын
這東西不會很容易斷嗎
@Pro3DTinkering
@Pro3DTinkering 29 күн бұрын
Nope) it’s pretty durable, when you use right materials
@Linyuho
@Linyuho 29 күн бұрын
@@Pro3DTinkering thanks
@mohamedgamel3683
@mohamedgamel3683 5 ай бұрын
thanks dude my dad will buy for me one and oh did you 3D print it cas it seemed to be 3D printed
@Pro3DTinkering
@Pro3DTinkering 5 ай бұрын
Np) yeah, I 3D printed them
@Wolfy_vr1
@Wolfy_vr1 26 күн бұрын
For me the stomach isn’t attaching to the chest
@Pro3DTinkering
@Pro3DTinkering 24 күн бұрын
Could you please provide more details, is the joint long enough to connect with the chest part?
@Wolfy_vr1
@Wolfy_vr1 24 күн бұрын
@ yeah it came with instructions everything is how it should just whenever I move the chest it pops out
@Pro3DTinkering
@Pro3DTinkering 24 күн бұрын
@ I’m asking about the joint, because there are almost two identical parts, one is a little longer than the other one
@Wolfy_vr1
@Wolfy_vr1 24 күн бұрын
@ yeah it’s the right one
@Pro3DTinkering
@Pro3DTinkering 24 күн бұрын
@@Wolfy_vr1 got it
@death_levesey3903
@death_levesey3903 3 ай бұрын
Это лучшая инструкция по сборке вы лучший И вопрос можете показать сборку lucky 13 ?
@Pro3DTinkering
@Pro3DTinkering 3 ай бұрын
Thank you for kind words! I'll check the model
@euricocastilho1958
@euricocastilho1958 Ай бұрын
Salvou!!! Mto Obrigado!
@hitman2481
@hitman2481 4 ай бұрын
What scale did you print this at?
@Pro3DTinkering
@Pro3DTinkering 4 ай бұрын
150%
@hitman2481
@hitman2481 4 ай бұрын
@@Pro3DTinkering does that make it 6 inch?
@Pro3DTinkering
@Pro3DTinkering 4 ай бұрын
@@hitman2481 almost 8 inches
@hitman2481
@hitman2481 4 ай бұрын
@@Pro3DTinkering oh cool. Do you know what scale 6 inch would be? Isn’t 100% smaller?
@Pro3DTinkering
@Pro3DTinkering 4 ай бұрын
The original size (100%) is 5.1/4 inches
@404-sh4d0w
@404-sh4d0w 6 ай бұрын
pls help how do i detach the shells i did it wrong
@Pro3DTinkering
@Pro3DTinkering 6 ай бұрын
Which part ?
@404-sh4d0w
@404-sh4d0w 6 ай бұрын
@@Pro3DTinkering the torso and arms (i accidentally put the shell on the arms backwards and i put the piece that inserts upside down for the torso)
@Pro3DTinkering
@Pro3DTinkering 6 ай бұрын
Could you please send the time code from the video
@404-sh4d0w
@404-sh4d0w 6 ай бұрын
@@Pro3DTinkering 5:45 and 0:52
@Pro3DTinkering
@Pro3DTinkering 6 ай бұрын
For the torso part, hold the bottom piece from the sides and grab the top(with 13) also from the sides where the arms ball joints, and gently pull, same with the arm, just don’t apply too much force
@Thegoobers-p6q
@Thegoobers-p6q 4 ай бұрын
Ty you just earn a sub
@Pro3DTinkering
@Pro3DTinkering 4 ай бұрын
Thank you!)
@Cheesecakemoney
@Cheesecakemoney 3 ай бұрын
That’s massive bro
@DRT135
@DRT135 5 ай бұрын
Why is mine loose?
@Pro3DTinkering
@Pro3DTinkering 5 ай бұрын
Did you buy it or print?
@DRT135
@DRT135 5 ай бұрын
@@Pro3DTinkering I bought it
@KaeganG-ct8ct
@KaeganG-ct8ct 6 ай бұрын
I was missing a piece for the black figure 😢
@Pro3DTinkering
@Pro3DTinkering 6 ай бұрын
Did you print the model or buy it online?
@KaeganG-ct8ct
@KaeganG-ct8ct 6 ай бұрын
@@Pro3DTinkering brought it
@Pro3DTinkering
@Pro3DTinkering 6 ай бұрын
@@KaeganG-ct8ct sorry to hear that, I remember someone also mentioned in the comments before, that one of the parts is missing. Is it functional without this part?
@KaeganG-ct8ct
@KaeganG-ct8ct 6 ай бұрын
@@Pro3DTinkering no
@francisbaldera6401
@francisbaldera6401 3 ай бұрын
You made it goood thank you for helping me
@Pro3DTinkering
@Pro3DTinkering 3 ай бұрын
Thank you for watching!
@Cutecats-kz9bn
@Cutecats-kz9bn 5 ай бұрын
Thank a lot I tried to use the manual, but it didn’t work so I tried to watch a other video and that didn’t work, but when I tried this one it worked😁
@Pro3DTinkering
@Pro3DTinkering 5 ай бұрын
Thank you! I really appreciate your feedback! 😃
@Cutecats-kz9bn
@Cutecats-kz9bn 5 ай бұрын
@@Pro3DTinkering your welcome😁
@Cutecats-kz9bn
@Cutecats-kz9bn 5 ай бұрын
@@Pro3DTinkering btw i subed😊
@Pro3DTinkering
@Pro3DTinkering 5 ай бұрын
@@Cutecats-kz9bn 😊
@The-Rambling-Gambler
@The-Rambling-Gambler 5 ай бұрын
Thanks for the guidance I was able to do it and they look very good 😊❤
@Pro3DTinkering
@Pro3DTinkering 5 ай бұрын
Thank you for watching!
@MithunvsanT
@MithunvsanT 5 ай бұрын
Bro where did u get that from?
@Pro3DTinkering
@Pro3DTinkering 5 ай бұрын
@@MithunvsanT 3D printed
@GGgamer_Charlie
@GGgamer_Charlie 5 ай бұрын
@@Pro3DTinkeringwhat website?
@GGgamer_Charlie
@GGgamer_Charlie 5 ай бұрын
@@Pro3DTinkeringand is there different colours?
@Yoichirox
@Yoichirox 6 ай бұрын
It is better to buy them or make them because I want to buy some but I don't know if it is better to buy since I don't have a 3D printer and I don't know if when I buy them there are only the instructions on how to print them
@Pro3DTinkering
@Pro3DTinkering 6 ай бұрын
I saw some stores on Etsy selling them as DIY kits to assemble, and also you can find the assembled ones. I’m thinking of starting an Etsy store as well
@SUPERMONKEY_34
@SUPERMONKEY_34 2 күн бұрын
Omg is Hard I cannot do it with the body😭😭😭
@Pro3DTinkering
@Pro3DTinkering Күн бұрын
Which part?
@Whitty.productions101
@Whitty.productions101 5 сағат бұрын
I am also having hard with this
@Pro3DTinkering
@Pro3DTinkering 5 сағат бұрын
Could you please send the time code
@galerondshade822
@galerondshade822 4 ай бұрын
Thanks, really help me ❤
@Dark.ninja..
@Dark.ninja.. 5 ай бұрын
I struggled sooooooooooo much were I wanted to gust put it all in the bin I still did not complete it
@Pro3DTinkering
@Pro3DTinkering 5 ай бұрын
just follow step by step and you gonna do it
@pokeopens
@pokeopens Ай бұрын
I can’t get the feet in
@Jzinx_
@Jzinx_ 3 ай бұрын
Thanks 😸
@brandedclay
@brandedclay 3 ай бұрын
what i really dont understand is why is no one printing this with 6inch height
@Pro3DTinkering
@Pro3DTinkering 3 ай бұрын
Why? Do you see the green one in the top right corner, it is exactly 6 inches)
@brandedclay
@brandedclay 3 ай бұрын
@@Pro3DTinkering who did u scale it to that? I meant the t13 I buy on Amazon is always 5in or 8in there's no in between
@Pro3DTinkering
@Pro3DTinkering 3 ай бұрын
@@brandedclay The original size dummy 13 is 5.5 inches that's what I meant. I've printed 3 versions, the original one (green I mentioned earlier) purple 150% and yellow 50% of the original size
@brandedclay
@brandedclay 3 ай бұрын
@@Pro3DTinkering I just want it to scale with my marvel legends, is there anyway to scale it to 6in?
@Pro3DTinkering
@Pro3DTinkering 3 ай бұрын
@@brandedclay are you planning to print it?
@ConeHatnugget
@ConeHatnugget 5 ай бұрын
Thanks! I understood the video more than the instructions 😅
@Pro3DTinkering
@Pro3DTinkering 5 ай бұрын
😁thank you for watching
@DinahLee-nv8vg
@DinahLee-nv8vg 5 ай бұрын
Me too😅😅
@Pro3DTinkering
@Pro3DTinkering 5 ай бұрын
@@DinahLee-nv8vg 😁
@PKFCCHANNEL
@PKFCCHANNEL 4 ай бұрын
Is it really good It is excellent.
@knavishrehab2935
@knavishrehab2935 4 ай бұрын
Where did you buy that?
@Pro3DTinkering
@Pro3DTinkering 4 ай бұрын
3d printed
@miquielnicoleifigueras9442
@miquielnicoleifigueras9442 5 ай бұрын
Why dummy 13 is so big?
@Pro3DTinkering
@Pro3DTinkering 5 ай бұрын
I scaled up to 150%
@miquielnicoleifigueras9442
@miquielnicoleifigueras9442 5 ай бұрын
So we're i can buy it?😅
@Pro3DTinkering
@Pro3DTinkering 5 ай бұрын
​@@miquielnicoleifigueras9442 I've seen them on Etsy. I also planning to open online store, but still working on it.
@miquielnicoleifigueras9442
@miquielnicoleifigueras9442 5 ай бұрын
Okay
You have to 3D Print this Toy!
9:14
Uncle Jessy
Рет қаралды 157 М.
T13 vs Stikbot
7:32
That Stikbot Channel
Рет қаралды 288 М.
BAYGUYSTAN | 1 СЕРИЯ | bayGUYS
36:55
bayGUYS
Рет қаралды 1,9 МЛН
СИНИЙ ИНЕЙ УЖЕ ВЫШЕЛ!❄️
01:01
DO$HIK
Рет қаралды 3,3 МЛН
Void - Episode 1 (The Realm of Duel) | English Subtitle
5:06
Jiboy Studio
Рет қаралды 38 М.
DUMMY 13 | TUTORIAL
6:42
Koehn Cornish
Рет қаралды 2,7 М.
Hướng dẫn lắp Dummy 13 / Lucky Puppets
26:00
Kiên Doãn
Рет қаралды 78 М.
3D Printed Action Figure | How To Make Your Own
5:17
3D Print Therapy
Рет қаралды 67 М.
50% Size, 100% Cool: Scaled-Down Dummy 13 Assembly
16:01
Pro3DTinkering
Рет қаралды 18 М.
Dummy 13 -  impresso 3D - 1300% do tamanho real (parte4)
2:35
Clístenes Bento
Рет қаралды 109 М.
Multi-jointed 3D printed dummy review - 3DHeroes
8:28
3DHeroes™
Рет қаралды 103 М.
How I Built a GIANT LEGO Dragon
25:12
MitchBuilds
Рет қаралды 583 М.
BAYGUYSTAN | 1 СЕРИЯ | bayGUYS
36:55
bayGUYS
Рет қаралды 1,9 МЛН