Dynamic Trolley Video

[@stevehook1361]

Stanborough lakes looking lush for bite on this video 🎣💯

[@ngtfishing8059]

All of our trolleys and as well as our Dynamic Barrow should come with a set of instructions. If they do not then please visit the below links to view and download them: Dynamic Trolley - nextgenerationtackle.com/dynamic-trolley-assembly-instructions/ Dynamic Barrow - nextgenerationtackle.com/download-dynamic-trolley-instructions

[@markdavies6620]

just got one of these off Ebay brand new for £94, fabulous piece of kit !

[@anthonysfishingadventures3775]

this is the best design i've seen

[@shauncorless8965]

Were can i get the bag that goes underneath 😅

[@Jackthekingfisher]

I got a similar one last year. But it was no were near as adjustable. My keep net landing net and bate tubs never fit on there so the extendable sides realy would help out. Awesome trolly. Cheers ngt

[@CB-xr1eg]

" bate "? BAIT. "...no were "? NOWHERE. No need to thank me.

[@jasonodoherty7929]

I ordered mine yesterday as all the other trollys were to small and I didnt want to get barrow and I dont want to have to carry my around I think if is a problemb with the wheels I think you should be able just click the wheel in and when you want to take the wheel of press a buntton in the middle of the wheel anyway cant wait to get mine tight lines guys.

[@davidshaw442]

Is this suitable for a carp angler who doesn't carry a massive amount of kit (light shelter chair and I carry my holdall...

[@earlgrey691]

Looks ideal for the carpies and their liberal amounts of gear lol but a tad beyond my shallow pockets alas.Struggling to find something less pricey for occasional sea/beach scenarios involving a bergen and two duffel bags but the general ones for non-fishing activities tend to have none of the all-important beach wheels,just pavement oriented.Can anyone recommend anything ?

[@danielmedhurst5737]

Will this take the new Shakespeare fishing box as want a trolley four sea fishing that will take my box but also carry my rods miles walking along the beach paths?

[@peterhack9071]

I have got this trolley yes it will take a seat box, as the sides adjust

[@millwallfan06]

Hi I’m going to use this for the first time and worried that where you put your rods will the bottom of the rods slip Off the trolley when tilting it?

[@tayuk3160]

Plenty of places to attach bungees to hold rods in place to stop them slipping off when tilted, have used this trolly for a year now with no issues, holds large carryall, chair, bivvy, 6ft double rod bag, net bag, rod pod, flask, mini cooker......but kitchen sink didn't fit.

[@addictedtoangling]

Looks very good

[@yuriynesterov4061]

Hello NGT, I am a Carp and Striped Bass angler here in USA. I am looking for sponsorship by NGT under any conditions. Thanks

[@Pricks-d7d]

Anyone know if this will be any good for sea fishing? Over shingle etc?

[@ninzb9502]

Hi can somebody please advise how is this on very soft sand with about 30 kg

[@Baxter771]

Will these take the korum deluxe chair? They are quite big!

[@ngtfishing8059]

The base of the trolley is 48.5cm deep and if you extend it width ways to the extremes, it can go to about 65cm, although we probably wouldn't recommend taking it out that far. This should quite easily hold the Korum Deluxe Chair. Our own Profiler PLUS Chair is actually wider than the Korum and our chair fits and carries on this trolley very well.

[@Baxter771]

NGT Fishing I can’t believe no instructions came with it! How do you fit the clips on the wheels please?

[@ngtfishing8059]

Here is a link to the instructions for you to download - nextgenerationtackle.com/dynamic-trolley-assembly-instructions/ Make sure the valve is on the inside of the trolley. Take the figure of 8 clip or Lynch pins and push the point down through the two holes in the axle. You may need to lift the small loop up and over the tip of the axle so that it snaps down into place and therefore securing the wheel in place.

[@Baxter771]

NGT Fishing super all sorted. Very solid 👍

[@petepete66]

Construct a bycicle holder for under the sattle ...then its perfekt

[@jasonodoherty7929]

Everybody I got my NGT dynamic trolly 2 weeks ago and I swear to everyone get one now if you dont want to get a barrow this is the best trolly on the market I know its not Tracker and Nash Me and my friend went to Lake johns in waltham Abbey he had his fishing box large rod bag and I my chair and fishing cradel and bag all on there and its so easy to put together and break down you dont even have to take it apart just fold it and put a strap round it and it will go in the back seat of your car and its only 70 quid they dont sell it at Angling Driect go to lidstersfishingsupplies its free postage on Ebay I hope you all get one you wont be disapointed let me if you any of you get one tight lines .

[@davidshaw442]

In looking at it mate I have a lightweight shelter chair small amount of luggage and carry my holdall and I need a trolley I can push rather than lift ,I'm considering this mmm....

[@cns180784]

The pins that hold the wheels on are sub standard and flimsy. Today one of them came off and i discovered the other one has buckled and looks to be just hanging on, not acceptable for the price. Just get to 1:05 in the video and you can see one of the pins holding in the wheel, it looks flimsy and is flimsy. Not happy.

[@ngtfishing8059]

Sorry to hear this, its the first time we have heard of this problem. Have you contacted anyone about this prior to your comment? You may have had a faulty pin. We tested the trolley to extremes for months and have not had any issues. If you can contact us on Facebook one of our customer service advisors should be able to help you out - facebook.com/NextGenTackle/ or you can email - [e-mail]

[@cns180784]

Hi and thanks for your reply, i can see now why the clips have damaged and come off, this is due to the tyre inflation valves. Usually these are always set so they're pointing outwards so its easy to get to them like how they're always set on bikes and with cars. I never took into consideration that the clips could catch the valve and get damaged. The store i bought the trolley from on ebay has replied to me after i messaged them and they said they'd send me two new clips so that'll be sorted.

[@ngtfishing8059]

Glad you got it fixed. We do recommend that the wheels be mounted with the valves on the inside. Yes it can make inflating a little more awkward but it protects the valves from the pin and any other possible damage such as knocking on large rocks etc. Anyway hope the trolley serves you well. Tight lines - Team NGT

[@cns180784]

I'd recommend you include an instructional leaflet with the trolley instructing the customer to have the inflation valves pointing inwards just so this wont happen again. It is a great trolley but i just now have to wait for the guy to send me my two new clips.

[@ngtfishing8059]

We are actually expecting to receive a set of instructions for both the trolley and our Dynamic Barrow within the next week or so. Every new trolley bought from will then receive a set of instructions. We'll also make the instructions available on our website for anyone who has already bought either of these two products and haven't had any instructions. Thank you for the feedback, we find this sort of information invaluable and like to hear from our customers and we like to always get in touch with them. Hopefully your pins don't take much longer to arrive. Tight lines - Team NGT

[@anthonyfelstead452]

How much

[@ngtfishing8059]

Says in the video description but it's £79.95 RRP. Prices may vary between retailers.

[@anthonyfelstead452]

Cheers mate

[@lecarpistedu9416]

Vous faite des envoie sur la france

[@ngtfishing8059]

Nous avons un certain nombre de détaillants en France et de nombreux détaillants au Royaume-Uni qui seront heureux d'expédier en France pour vous.

[@lecarpistedu9416]

NGT Fishing pourriez vous me donner des nom de site Web svp ou magasin Merci

[@roltol7539]

lol, dont drive it thrue the road man.. you can travel with the car there.. show real life traveling thrue fields and bushes...

[@saulgoodman9550]

You need stronger wheel pins come on ngt

[@ngtfishing8059]

Saul, if you have had a problem with the pins, have you contacted anyone about the issue? If you have had a problem with the pins, this maybe because you have the wheels on with the tyre valve on the outside rather than the inside, we do recommend this to our customers. If you had read the thread below with cns180784 then you will see this. You should have received a set of instructions if not they are available on our website to download and print. If you have any further issues please contact us first and we'll do our best to get back to you asap. You can do this by messaging us on our Facebook page facebook.com/NextGenTackle/ or emailing [e-mail]. Team NGT

[@azaz...]

@@ngtfishing8059 rude