E08 error candy washing machine / candy washing machine not spinning / quick fix!

Рет қаралды 19,807

Күн бұрын

Пікірлер

@thehightonesmduk 6 ай бұрын

Just wanted to thank you for your step by step advice!. I took ours apart successfully and repaired it using the steps you mentioned. Your a legend dude!!! Thank you very much

@GPTV2020 6 ай бұрын

Awesome, glad to help. Thanks for your comment.

@beng9314 5 ай бұрын

Saved me buying a new washing machine watched so meany videos on why it wasn’t spinning

@GPTV2020 5 ай бұрын

@@beng9314 glad to help.

@matthewdrake9699 8 ай бұрын

I can’t tell you how much i appreciate this video, this is the exact problem with mine and it has worked! My new brushes have arrived now too. Was a difficult job to get the the back of it and get the motor out, but i reckon you’ve saved me about £150! Many thanks!

@GPTV2020 8 ай бұрын

Thats great thanks for your comment 👍 I'm glad i could help.

@samanthaferry6052 5 ай бұрын

Just finished fixing mine. There was one of bushes that needed pushing out/stretching and a wire that had melted and been taped and tape had come off so stripped back the wire re-wrapped it and clipped back. It’s spinning now but when starting/adding water still makes a drilling sound so may have a motor issue but for now it’s running. Thank you so much !!!!!

@GPTV2020 5 ай бұрын

@@samanthaferry6052 ah good job, the drilling sound could be the water pump, the fan blade's on the water pump could be broken or maybe the filter. Im not sure but Clear out the filter first, that might work.

@ukeddiec 9 ай бұрын

Thank you so much!! I was going to throw it out after seeing a new pump was 120 quid. This fixed mine. Just gotta find new brushes now

@GPTV2020 9 ай бұрын

If you have the same washing machine as mine i have a link in my description for the brushes. Thanks for your comment.

@Lysergikal Ай бұрын

Thanks for the vídeo mate...did exactly as you, worked out really fine. Carbon brushes were stuck, due to the powder they release. You saved my day. Keep it up 👌🏼👍🏼

@GPTV2020 Ай бұрын

Great to hear!

@DangerDeeTee 4 ай бұрын

Absolute legend mate, the amount of money you’ve saved all of these people in the comment section ❤❤ just done mine and I’m about to go on and order the new brushes. Keep up the good work

@GPTV2020 4 ай бұрын

@@DangerDeeTee cheers for that, thanks alot for your comment and support.

@muhllabmayrgani5626 8 ай бұрын

This was helpful tutorial 👍🏼 Plus .. clean the black dust sticking in the brush springs and you good to go

@powernicky 2 ай бұрын

Fair play Gavin, that's sorted my problem too, exact same washer. Keep up the good work!

@GPTV2020 2 ай бұрын

@@powernicky cheers for your comment, I'm happy to help.

@robfay5195 3 ай бұрын

Followed this step by step and worked perfect!! Thanks a mill👍🏻 great video .

@GPTV2020 3 ай бұрын

@@robfay5195 im glad it helped, thanks for your comment.

@altro_productions1 5 ай бұрын

Thank you so much for this very helpful video! My machine works again :)

@GPTV2020 5 ай бұрын

Great, happy to help. Thank you for your comment.

@altro_productions1 5 ай бұрын

@@GPTV2020 Oh no! But now, just before the washing machine has finished, I get the error E09 :( Did you had this problem too?

@GPTV2020 5 ай бұрын

@@altro_productions1 I've had that before, e09 could be a problem with the motor, the triac the main bord, you'd need to take it out and solder a new one on, its a bit fiddly. But it also could be just too much carbon build up around the motor. I actually never fixed mine it just went away. Dose the washing machine spin at all.

@altro_productions1 5 ай бұрын

@@GPTV2020 Thanks for the reply! I'm pretty sure I know what I've done wrong now. When I extended the spring of the brushes I also switched the sides of both (The left one to the right. Right to the left). Now I switched them back and it seems like it works just fine :)

@GPTV2020 5 ай бұрын

@@altro_productions1 if it goes again try to clean as much of the carbon from the motor and any electrical bit's, but if it still keeps happening look up how to change the triac. Hopefully it keeps working for you until you get the new brushes.

@kristonwhite 4 ай бұрын

Thank you so much. Worked a charm. Appreciate your help!

@GPTV2020 4 ай бұрын

@@kristonwhite good stuff gled to help.

@jimikite999 9 ай бұрын

Exactly the same symptoms, one brush was stuck in with dust, sorted 👌

@GPTV2020 9 ай бұрын

Grand, you should get another few weeks out of it so just buy the new brushes to have them for when it does go.

@scorpiosqueenkitchen872 2 ай бұрын

Thank you my machine went today do you know where i could buy the vrushes ?

@GPTV2020 2 ай бұрын

I have an affiliate link to amazon in the description. Here it is. amzn.to/3PpId4G Thank you for your comment 👍

@martinbrown6487 6 ай бұрын

These brushes use to cost £1 or so, standard brushes can be fitted inside as I recall

@GPTV2020 6 ай бұрын

Yes, that's right, there are different shape brush housings but most of the brushes can be swapped in the housing rather than buy the housing too but they are so cheap that including the housing its only around 12 euro for a set.

@shayes1199 3 ай бұрын

Great video mate. A link to the brushes would be fantastic.

@GPTV2020 3 ай бұрын

@@shayes1199 thanks alot, i left a link to the brushes i needed in the description below. Cheers for your comment.

@superdarth11 2 ай бұрын

Waiting for the part from EBay fingers crossed.But I have never had a washing machine that has had so many problems than this Candy.couldn’t believe the door hinges are plastic 🤦‍♂️.Had to replace them a few months back.

@GPTV2020 2 ай бұрын

@@superdarth11 they don't make them like they used to. Cheers for your comment.

@eustachybakielka 7 ай бұрын

Super helpful video, thanks man💪

@kellz5135 4 ай бұрын

This worked 🎉🎉🎉 I swear I could kiss you right now 😂

@GPTV2020 4 ай бұрын

@@kellz5135 🤣 i Don't think my wife would approve!

@kellz5135 4 ай бұрын

@GPTV2020 🤣 I'm Sure. But just happy, grateful, thankful kisses...thank you soo much!

@MRROBBIEWATTS 5 ай бұрын

Mine spins slowly, but wont go into a 'FAST' spin?...any ideas? -Thanx - :)

@GPTV2020 5 ай бұрын

@@MRROBBIEWATTS if could be too much it the drum so it will have an uneven weight or check out the filter, it could need to be cleaned out, if there is too much water in the drum it will not spin full speed so the filter could be blocked.

@MRROBBIEWATTS 5 ай бұрын

@@GPTV2020 - hey thanx! - :)