i can't wait to upload a video of just me driving my setup just for the sound. this car sounds amazing
@BlakesGarage4 жыл бұрын
I'm amazed you didn't rip those old mounts in half they were so pancaked. Cool to see a new video from you. I need to get to editing all of my S52 Swap footage.
@derkm4 жыл бұрын
Haha yeah the old bushings were definitely tired. But thank you man! Get to editing it and don't be like me; this footage was from like March 😂
@royobanen15073 жыл бұрын
Hey brother I'm in process of getting my garagistic solid mount shifter and I'm very excited about it, I've constantly been looking at various videos like yours, garagistic videos and others... thanks 😊 for posting great content for the viewers so they could learn I'm from TORONTO CANADA 🇨🇦 HUGE SHOUT OUT TO YOU BROTHER, people like you influence many 2 DIY and not go through a mechanic, respect e30 community brother 👍.
@derkm3 жыл бұрын
Thank you so much brother!! Really really appreciate it and it means alot to hear this 🙏 I'm actually working at Garagistic full time shooting videos and photos for them so keep checking out their content and I'll also be uploading on my channel again! Enjoy your solid mount shifter and ty again 🤘🤘
@Ebzyy__4 жыл бұрын
Every video I debate whether I should turbo mine, keep it up Derek 1 of my fav KZbin channels.
@derkm4 жыл бұрын
Do it man! Just be prepared to spend more than you origionally intend to spend 😅 but thank you so much I really appreciate it!! 🙌🙌
@jeancamacho13522 жыл бұрын
No bs i watched 1 vid and sub super chill and enjoyable videos to watch… 💯📈🤝
@derkm2 жыл бұрын
I appreciate you bro thank you! ⚡🤝
@giandanielfaccini95125 жыл бұрын
Clean man, love your builds
@garrettgiuffre72984 жыл бұрын
Makes me miss my 325is
@e30sheib4 жыл бұрын
Papa derk goin in
@1PDee3 жыл бұрын
What did you do for the reverse lights?
@derkm3 жыл бұрын
I drilled a hole next to the shifter so the wire could pass through. Also added a grommet so it wouldnt cut into the wiring 👍👍
@1PDee3 жыл бұрын
@@derkm Thanks!
@excite80754 жыл бұрын
Oof those turbo noises
@nasserkhaja18794 жыл бұрын
@derkm has your getrag held up fine with your turbo setup? I'm piecing together a swap, expecting 260whp and cant decide whether or not to just upgrade to a ZF. Though the ZF would handle the power then there are the issues with money shifting, sloppy shifter, etc 🤷♂️
@derkm4 жыл бұрын
I've had my current getrag 260 in the car for the past 2 years I believe but this is my 3rd one 😅 not sure if I was just unlucky but the first two g260s didn't last too long. As long as you get one in decent condition, it should handle 260whp no problem but a zf would be nice. Not sure what you'd need to run the zf on an m20 but im sure its doable
@bullethelldemon5 жыл бұрын
is the oem height too difficult to shift for a daily? been debating between it and a full shifter rebuild with poly+delrin bushings, dssr, and z3 short shifter. i really want the solid shifter but i'm worried it might get annoying in my daily. what's your take on that?
@derkm5 жыл бұрын
Good question! The oem height, in my configuration, is a little too difficult to shift sometimes but I think it can be a bit easier by adjusting the bottom part of the shifter that connects to the dssr although I havent tried it yet. The z3 shifter with the Garagistic shifter rebuild & poly/delrin bushings and dssr was perfect for daily use; but it's all preference! I like that the solid mount shifter is customizable and I'm currently running the medium height handle and I'm loving it.
@bullethelldemon5 жыл бұрын
@@derkm hmm yeah i wonder what it's like with the most lenient setting for that bottom part then.. for some reason i still doubt it'll be enough to make it truly comfortable, but i think you told me exactly what i needed to be able to decide. the solid mount is cool and glamorous buti think i'm gonna go with the rebuilt z3 setup, thanks!
@MichaelFitzpatrickk7 ай бұрын
Has the NVH gone down a bit since you installed these? I hear it gets better with time as the poly gets a bit softer.
@derkm7 ай бұрын
I've since switched to the Garagistic supreme shifter as of a year ago but the NVH did go down a bit after running the poly bushings for a bit! To be fair, they weren't too bad imo when I initially installed them either.
@itsBlack4 жыл бұрын
Nice vid. New sub!
@HD.Motorsports4 жыл бұрын
Is the oem size shaft comfortable enough to daily a car. Im looking to get the chassis mount shifter for my e28 when i do the manual swap but i want it to look oem. So is it comfortable to use daily or is it to stiff and tiring to use daily?
@ej48514 жыл бұрын
H D I was questioning myself about the same thing. So I went with a medium, I didn’t want mine too notchy for my daily.
@ProjectRacecar23 жыл бұрын
Love the e30!! what camera do you use for those shots?
@derkm3 жыл бұрын
Thank you man! I use a Sony A7RII 👍
@ProjectRacecar23 жыл бұрын
@@derkm Awesome thanks for the quick reply! Do you edit through adobe?
@derkm3 жыл бұрын
@@ProjectRacecar2 No worries and yessir I edit on Adobe Premiere! If you wanna see my most recent work, check out the Garagistic KZbin channel. All the new videos on there are done by me 😁
@garagistic5 жыл бұрын
🤩🤩🤩🤩🤩
@mr.he-rock-ohh23554 жыл бұрын
Tell him to make more videos. I peeped him in your video! i know you're keeping him to yourself!
@davidm25394 жыл бұрын
Dope car man! I noticed you retrofitted the e36 window switches, any way you have a wiring diagram? I'm trying to do the same
@raulcastanon1824 жыл бұрын
That’s stock
@kennyhultquist38922 жыл бұрын
@@raulcastanon182 no it isn't
@josselinrioul49384 жыл бұрын
will you have a link to be able to buy this shifter?
@derkm4 жыл бұрын
Sorry about that! Just added a link in the description to the shifter.
@silvanuskomalpersad36064 жыл бұрын
What side skirts do you have on your e30?
@mistythelion4 жыл бұрын
hi @derkm do you need you change your rear carrier assembly when installing the chassis mount shifter? Or is it cool running the stock assembly? haha
@derkm4 жыл бұрын
It eliminates the need to run a rear carrier assembly completely! All you'd need to refresh the whole shifter assembly with the chassis mount shifter would be the selector rod joint and a DSSR. Remember to run poly motor and engine mounts as well
@mistythelion4 жыл бұрын
@@derkm Ohh okay sweet! Going to put everything together this weekend! thank you and im looking forward to your next vid!
@derkm4 жыл бұрын
@@mistythelion awesome! And sorry for being MIA with the new videos but I promise I have a ton of content just waiting to be edited. Go subscribe to the Garagistic KZbin channel though if you wanna see the videos I've been working on lately 😁
@carsinruin61024 жыл бұрын
So what’s it like running those mounts?
@derkm4 жыл бұрын
They're great! Didn't add as much vibration as I thought it would. Car feels a bit more solid and responsive with these poly motor mounts and matching poly trans mounts.
@timvanderipe92962 жыл бұрын
What are those side skirts ?
@derkm2 жыл бұрын
Unfortunately im not sure :/ came with the car when i bought it as a shell and they have no branding on them. Im looking to get them scanned and remade. If you're interested in purchasing one of those when i get them made, shoot me a dm @derkm
@ooeyadoo56304 жыл бұрын
What diffusor is this I like it a lot
@derkm4 жыл бұрын
It's a custom dtm fiberwerks diffuser they made for one of their old shop cars. Unfortunately, it's the only one I know of that they made but I think they make a similar one that's on their website!
@worangejuice3 жыл бұрын
What Sideskirts are these??????
@derkm3 жыл бұрын
Unfortunately, not sure what they are 😔 Came with the car when I purchased it as a shell. They are fiberglass and have no markings on them regarding brand.
@Cle_M33 жыл бұрын
Hey what diffuser is that if you don’t mind me asking?
@derkm3 жыл бұрын
It's a one-off DTM Fiberwerks rear diffuser they made for an old shop car they had. If you google "eurostop E30", its the same one on that red/black E30 👍
@Cle_M33 жыл бұрын
@@derkm Appreciate it thank you! And as always awesome build and content.
@derkm3 жыл бұрын
@@Cle_M3 I appreciate it man! 😁
@void39234 жыл бұрын
seems to me like you need to build a shed with a hoist...
@flipnetikz4 жыл бұрын
Who's watching this on Christmas!?
@flacko-_-4294 жыл бұрын
Do u ever plan selling your 50 swap
@derkm4 жыл бұрын
I currently have a buddy who's interested in purchasing the whole m50 drift car after I do a few more things to it and take it to a few drift events 😁 if you're interested though, hit me up!
@flacko-_-4294 жыл бұрын
How much would u sell it for?
@derkm4 жыл бұрын
@@flacko-_-429 send me a msg on ig! @derkm . I can give you all the details 😁
@firstlast7104 жыл бұрын
How much hp does your car make?
@derkm4 жыл бұрын
Only maybe around 250whp at the moment according to multiple people's estimate. Still need to get it dyno tuned and gotta turn up the boost 😬
@firstlast7104 жыл бұрын
@@derkm you need to go through your fueling system
@firstlast7104 жыл бұрын
@@derkm meth inject!
@derkm4 жыл бұрын
@@firstlast710 I was thinking about meth injection or e85 flex fuel! I already have 42lb injectors on the car right now and a walbro 255. Would definitely need to upgrade if I go with e85