Will be interested to see what you make on the dyno with this. Running these cams on my own engine and have done back to back testing. Made a gain of 20bhp over standard. Peak power at 6,800rpm.
@HCAutosport3 жыл бұрын
We already had our first AFR tuning session. But at 5500 rpm we are maxing out the stock injectors at 95% duty cycle. Once we have new injectors we will post an update video😃
@larrysilva1573 жыл бұрын
Looking forward to seeing your videos you got another subscriber here 🤟
@HCAutosport3 жыл бұрын
Thanks Larry! We will be on the dyno next week, and will post a video with the results right after!
@Xirui_D3 жыл бұрын
Nice!!!
@archanachoudhary25713 жыл бұрын
Good...
@mehulvekaria48442 жыл бұрын
😍
@landonshaw12653 жыл бұрын
Hey liked the video, I ordered the same set and would like to know how you got the old gears off the old cam shaft and back onto the new camshafts as I cannot find any information where they switch everything over.
@HCAutosport3 жыл бұрын
Hello, I safely held the old cam on bench vice and used an air gun to get the old gears out
@tudordan63372 жыл бұрын
Did you upgraded valve springs or anything else?
@HCAutosport2 жыл бұрын
We used upgraded valve springs with the Schrick cams. We used hypertech springs. One thing to be careful about when choosing the springs is the seat pressure. Make sure to reach out to the manufacturer and confirm that you are getting the right springs for your setup
@matella_official2 жыл бұрын
Where u buy this one ? If u can , could u put a link ?
@HCAutosport2 жыл бұрын
You can order the cams from Turner Motorsport (www.turnermotorsport.com/p-200185-schrick-camshaft-set-e46-330-530-x5-30-z3-30-272256/) In order to get the best performance I suggest professional installation and a tune to avoid lean conditions!