earn $150 an hour UV printing on cupholder cozy things printer idea Jays printers ZZ1S

[@LanceMcGrew]

I'll certainly watch more of your videos just for the Corel Draw basics :)

[@JaysToDoList]

Thanks normally I make them into a separate video but I decided to put them all in one on this video and see how it goes

[@KaiBuskirk]

Super Cool!

[@justalanjones]

Would you recommend this printer as a first UV printer for someone?

[@JaysToDoList]

If you are serious about getting into uv printing this is a good option it is not a converted desktop printer like alot of the cheaper machines out there so it it more reliable

[@kustom2u704]

How do you remove the printed circles on the bed?

[@JaysToDoList]

@@kustom2u704 razor blade and achohol we tend to razor our beds off every month or two

[@KaiBuskirk]

After a while how’s the printer? Was there additional models? I’d like a bit bigger size!

[@JaysToDoList]

still runs good there are models all the way up to 24x36 inches :)

[@forevertots612]

What do you save the file as before exporting to printexp?

[@JaysToDoList]

@@forevertots612 if using spot color in photo shop save as a tiff if others younwill not be able to print with spot so you can save as tiff or jpg

[@dturk964]

Just curious what the print speed is for printing a full beds worth with CMYK and white?

[@JaysToDoList]

Surr about 20 mins on this machine

[@RebelTurtleTim]

Why not making tape the bed before printing the lines vs printing directly on it? Also, can't you clean the head and turn it off vs leaving it on? I assume you leave it on and blowing ink to keep it from hardening on the head?

[@Ezanity]

how is that hard ink so flexible.i might have to try some

[@JaysToDoList]

@Ezanity sure goes on thin if we printed alot of white it would crack

[@KennyPollich]

So you have to burn the bed like that every time to line then up right?

[@JaysToDoList]

Just put down the cardboard or you can scrap it off and go again

[@surge100p]

How do you clean the printer bed after printing lines on it?

[@JaysToDoList]

Razor blade does well the ink does bond well you can also use a silicone matt and print on thag

[@Sheildofview1000]

@@JaysToDoList thanks

[@ulaB]

I am not sure I got why you keep the printer on? Does it keep the printhead clean?

[@JaysToDoList]

Yes is automatically cleans the printhead every so many hours so it doesn't dry out

[@ulaB]

@@JaysToDoListOtherwise you'd have to flush the lines and the printhead if you don't use it that often? I had thought about getting a UV printer, but as a hobbyist it won't run daily.

[@dgsl1354]

How do you clean off the tray after?

[@JaysToDoList]

Alcohol and a razor if needed

[@CJMartinez-xc7gr]

Can you print on tumbler with this uv printer ? Thank you

[@JaysToDoList]

This model only prints on 3 inch tall items and doesn't support a rotary the next model up does however no problem

[@CJMartinez-xc7gr]

How much is next item up and do you sell it? Thank you 👍

[@donnymiddlebrook]

My OCD can't handle that you didn't align all of those the same orientation. lol

[@JaysToDoList]

Yeah my speedy haste has triggered a few people's old haha sorry