EarthMinded FlexiFit Diverter System Review and Install

[@popegreg23]

I was wondering why you didn’t show the spigot installation? My kit came with 3 sizes of hole saw and the spigot. It’s the same as the kit that you linked from Amazon and that one shows the spigot and 3 hole saws.

[@stump182]

Thanks for the video. Very helpful. You made me the honey-do hero of the day.

[@BIsForBudget]

You're very welcome.

[@terryduschinski8465]

I don't understand why the diverter inside the downspout is a doughnut? Does it divert only a percentage of the water traveling thorugh the downspout?

[@BIsForBudget]

Hi Terry. That's correct, only a portion of the rain coming down the downspout is being captured by the barrel. That said, it's pretty amazing how quickly the rain barrel becomes full with heavy rain. When the barrel is full, all the water is then forced down the center hole and down the downspout. Hope this helps.

[@unclestuntman]

How is it with keeping debris out of the barrel? Also, wouldn't it be better if the hole in the downspout is lower than the hold in the barrel verus it being parallel?

[@BIsForBudget]

Hello. Fortunately, my gutters are relatively clean and I don't have much problem with debris in the water. I live in a one story house, and clean out the gutter yearly. That said, I only use it to water plants. So, no need to have super clean water. I suppose you can use some type of mesh to keep out the debis, but that creates a point of failure where it can get clogged... I like the hose being level, that way when the water level nears the top, it reaches an equilibrium. Not too high, not too low. It's been working flawlessly through many rain storms. 👍

[@JessicaVanderhoff]

Thank you, this was really helpful!

[@BIsForBudget]

My pleasure, I'm glad it helped.

[@thomassmearcheck2819]

shouldn't you have gone down 4/3/4 on down spout so you have fall instead of 5 in ,am i wrong ?

[@BIsForBudget]

Hello Thomas, I've personally done 2 barrels with the specs in the video. Water completely fills the barrel and diverts the excess as designed.

[@trig33kgirl]

Good idea for the dish soap

[@BIsForBudget]

Thank you!

[@beatricemendez109]

How does the winter cap fit on? Do you just disconnect the hose and pop the cap on?

[@BIsForBudget]

Hi Beatricemendez109, the diverter valve is removed and in its place, the winter cover is attached using the 2 screws (using the existing holes). Hope this answers your question. Thanks!

[@beatricemendez109]

@@BIsForBudget Thank you! I just placed my order for a kit!

[@stevewiskowski495]

I have a rain barrel with a top lid and a screen to collect debris. How do I connect a diverter so the water pours into the barrel on top?

[@BIsForBudget]

Hi stevewiskowski495, I've seen the use of diverter kits like the one linked below: amzn.to/3yIa7Ec

[@Ray-ws5jy]

So when the barrel overflows, does this kit come with a diverter valve that allows the water to continue traveling down the pipe?

[@BIsForBudget]

Hi Ray. Yes, when the barrel is full, the diverter valve allows the water to continue down the down spout.

[@procutslawn]

Exactly what I wanted to know

[@jmilz08]

What size hole saws are those 2

[@BIsForBudget]

Hi Jar. According to my micrometer, the outside diameters are 1.46 and 2.09 inches.

[@prasillawatikumar8199]

I son of the two old people that need the toilet system fixed today.

[@hassanfrancis1]

It's a bad vid because he didn't say size of whole saw bits.

[@BIsForBudget]

The beauty of this kit is that it comes with the appropriate hole saws. That said, for those interested they are 2" and 1.5" hole saws bits

[@kendallsmith1458]

picky picky