Рет қаралды 56
It's your boy Eric from Big E Bikes showing you the easiest way to add pegs on your #Surron or E-Ride Pro.
All you need is a longer axle, BMX bike pegs with the largest hole you can get and 2 nuts that go through the axle and fit inside the chain tensioner blocks and you're good to go.
( You only need the spacers because the stock chain tensioner blocks are uneven so if you try to tighten down the pegs onto the stock chain tensioner blocks your pegs will be uneven / slightly angled backward. Having a nut or spacer there that fits inside the chain tensioner block eliminates that issue so when you bolt on the pegs they tighten on straight and securely onto the axle.)
Here's a link link to my first video on the peg installation to give you a little bit better understanding.
• How to Install Peg's o...