EASIEST Spray Paint Can Shaker Stirrer BUILD drill powered

No welding, no special tools, just simplicity!
3inch pipe test plug: amzn.to/2UNIdih
Best premade shaker I've seen online: amzn.to/3lSqSkd
What you need:
1- 10-11" length of ABS 3inch pipe
1- 3inch pipe test plug
1- 3/8-16 nut
1- 3/8" fender washer
TOOLS you need:
any saw(hand powered or electric) that will cut wood will cut ABS pipe
a wrench
tons of spray paint
Thoughts:
1500rpm seams to be about what you should start out with. The rag makes it much smoother at higher rpms. Running 60 seconds for full cans seams to be more than enough. Less than full cans have more room inside for the paint to move around so they mix faster at 30-45seconds. Pulse it on and off a few times and it's ready to spray. Fits all sizes of cans from Rustoleum, Valspar, Krylon and everything in-between.
I ask nothing of my viewers but awesome people are constantly asking how they can support the channel:
Purchase any items you were going to purchase on Amazon anyways by first clicking through my affiliate link. Costs you nothing but I get a few cents for referring you to Amazon: www.amazon.com/shop/sixtyfiveford
OR
Throw Ginger a new bone: www.paypal.me/sixtyfiveford
STAY UP TO DATE BETWEEN PROJECTS
sixtyfiveford
sixtyfiveford/

[@leebarker539]

I built one. Great idea. And get this: It will actually mix natural peanut butter; that half-inch of oil on top before the jar is opened? Mixed in, ready to spread! Thank you!

[@adamz8276]

I used a old long sawsall blade that I hose clamped to the can. Then I used the sawsall to shake the can which is a lot like a paint shaker. My build was essentially free as everything I used was old and wore out.

[@karenj4641]

Thank you so much. I'm a 70+ year old woman who just put together a shaker following your instructions. Works like a charm. My patio furniture thanks you.

[@sixtyfiveford]

That's fantastic!

[@azjv]

This is exactly why I sub to your channel. Thinking "out of the box" solutions to common problem/issues and time savers.

[@sixtyfiveford]

Thanks, I'm glad you liked it.

[@lewiemcneely9143]

@@sixtyfiveford A-PLUS!

[@saxonfan]

I made 2 today, went to my garage, had zero 3 inch pvc. So I went to work, which is Lowes for me. I bought 2 feet section. I almost passed out. $17.63 for one section, i was about to scream. But I sucked it up and bought it. I made 2, they are wonderful. Thank you very much

[@sixtyfiveford]

The price of pipe right now is crazy.

[@saxonfan]

@@sixtyfiveford I was shocked

[@AtimatikArmy]

Seriously dude? Your amazingness just doesn't end, yet you remain so humble. I am humbled.

[@sixtyfiveford]

Thanks for the kind words.

[@trekzilladmc]

I just made two of these---one for me and one for my dad. Ace Hardware had everything I needed. So cheap and so simple!

[@OldMysticFantasist]

Really like the shaker idea, but it's your helper that definitely gets the thumbs up!

[@richardshowers2860]

Thanks for the heads up! Hate to think how many semi-full cans of WD40 cans I've thrown out. Despite sticking a straight pin in the nozzle on top, to shakin' the living 'you know what' out of the can, nothing brought the cans back to life. I aim to build me one just like you did. Hats off my man!

[@1970chevelle396]

That's a good idea. I probably never shake the cans enough.

[@sixtyfiveford]

You and me both.

[@Guillotines_For_Globalists]

@@sixtyfiveford You guys probably don't shake the cans enough and still end up with better paint jobs than I can muster.

[@Guillotines_For_Globalists]

Thanks for this idea. I think you had an older video using a tin or aluminum can. I made one out of a can of corn or peas, but then "upgraded" to one of those taller cans of beans. Works great for stirring spray paint! You truthfully are the best crafty DIY channel out there, always producing enjoyable content as well!

[@RANDALLOLOGY]

That sure will make it easy on arthritis hands for shaking at the paint 👍

[@sixtyfiveford]

Thanks, I'm glad you liked it.

[@AkornzStash]

I saw this video several years ago, and made one from stuff I already had. Works Great and saves time. Thanks for all your great videos!

[@star978]

A 2ft chunk of that 3" pipe is almost $20.00 w/tax at HD now. Along with $6.00 for the test plug and it's almost $30.00. I went the cheap route and made one out of a tin can a 2" bolt and some hardware. basically it's free and it works great. I use a wood shim to hold the spray can in place too.

[@Guillotines_For_Globalists]

He gets a lot of stuff at auctions, at the kerb, in lots, etcetera. You're right though, if you were to buy it outright and specifically for this project.

[@saintguardian3639]

Thank you for this. I have several paint cans as a miniature painter as I need to prime everything. So I'm hoping this will give me everything I need instead of shaking my arm off. Having the parts list is a huge bonus, thank you.

[@sixtyfiveford]

Hey Thanks. I'm glad you liked it.

[@Powerstroke2003]

Definitely gonna make one of these. Another awesome trick for spray paint is to fill a pitcher with hot water and let the can sit in the hot water for a while before you spray it and it is way smoother, combined with this new shaker 🙌

[@arthurdolle5257]

Not too hot with a full can I've never had one burst but I think it's possible

[@ArmySigs]

@@arthurdolle5257 If you make it too hot the propellant will come out without the paint! I've done that before lol

[@byronwoolfrey1039]

I made one too but I attached the piece of pipe to a reciprocating saw blade. Split the pipe down the middle and used a steel hose clamp to hold the spray can in place. As the blade goes back and forth it really shakes the can, not just spins it. But your device is good too.

[@thcall6441]

Thanks for your video on welding plastic. Couldn’t get part for my mitre saw saw guard. Tried epoxy. Didn’t work. I remembered your video on welding plastic. Worked like a charm. Solid repair. Thanks

[@dustyphillips3166]

Simple, effective, durable, and cheap. Those are the best.

[@sixtyfiveford]

Hey Thanks, I'm glad you liked it.

[@tenochtitlanwarrior1]

I love ur ideas KISS that's what we need people complicate everything thx keep it up Man May The Lord Bless U and Ur Family

[@sixtyfiveford]

Thanks, I'm glad you liked it.

[@southwestrider9027]

I watched your video a couple times and thought it can't work that good. I built one myself it is amazing how well it works.

[@jorgepena8626]

This idea turned out perfect! Purchased the items from HD and with current prices, came out to under $30 to assemble. Decided to go with a 24" pre-cut PVC, stainless steel set of nuts and washers (Everbilt) per your specs. The screw from the test plug seems to be just right in length to fit in a drill's clutch. Thanks!

[@ryanlangan1060]

Great idea! With a 1/4-20 bolt, a coupling nut, and some loctite, it will fit in the drill chuck better.

[@t.e.1189]

I like your video. I've watched a number of them over the years and always get something out of them. Thanks for sharing, especially the oil/water test. That made it very convincing. Also like your doggy.

[@BigFarles]

I bow down to your genius. I'm going to build one to use for my Loctite demos.

[@sixtyfiveford]

Thanks, it works pretty well.

[@theodorehile7921]

As a former Loctite rep, I approve this message :)

[@Zach-k2p]

Haha, this is great, my grandfather(98 currently) made one back when I was a kid. Never seen one again till today. I use the one he built in the 80s still today

[@sixtyfiveford]

Very cool!

[@kenday7942]

I just watched a couple of your videos - including this one - very helpful and practical information, well presented without a bunch of BS just straight to the point. I really like it! Also your dog is awesome!

[@sixtyfiveford]

Hey thanks

[@G3MsFixIt]

Just bought one those plugs and have 3 inch abs sitting around and have big paint projects coming up and paint that has been sitting for years but all new cans so after I clean nossels from your other video I will use this idea and save alot of time. I hope it works like your video shows - it makes sense and I like that demonstation at the end with clear bottle thats what sold me. Thanks keep making out of the box soultion videos - I like the way you think. Simple and effective.

[@bobrepholz5116]

Awesome hack! Was going to invent something today but your video saved me lots of time.

[@JimRobinEric]

Made one for myself and my son..WORKS GREAT, THANKS.

[@sixtyfiveford]

Great to hear!

[@charlesperrea1026]

Woww this IS THE sharpest DUDE in the box for shure. Final point.

[@sixtyfiveford]

Thanks, I'm glad you liked it.

[@stevemorton7141]

Love the simplicity. Another important reason for hand shaking the can is impart warmth from your hands into the aerosol and paint or other content. This helps to break up "clumping" of the solids that always sink to the bottom of the can especially after sitting for long periods.

[@johnlacambra6004]

I usually get a pot of water and heat it till boiling point and let it cool for about a minute. Then I throw in all my spray paint cans that im going to use and let it warm up in the water before shaking em up for use. I keep em in the water and keep the water warm until im finished. Every liquid sprays a lot smoother and better with stronger spray pressure due to the inside pressure of the can being higher from heat. You should try it.

[@russellstephan6844]

Simple, cheap, and highly useful! I'm always spray painting the results of small welding projects or fixes. A dozen tips o' the hat to you!

[@sixtyfiveford]

Thanks, I'm glad you liked it.

[@M.TTT.]

Finally making one of these as the weather warms up. Lot of painting to do.

[@mitchd949]

Love that you TEST the device! So many yt vids just post nonsense solutions. You, sir, are a step above!!!

[@sixtyfiveford]

Hey thanks, glad you liked it.

[@aitf99]

Good Lord this is genius !! You are a mad scientist my friend !!

[@sixtyfiveford]

Wow, thanks

[@AngelaLumKleindabnz]

Awesome! Done and built! You just saved me so much time and frustration.

[@gadget850]

Great idea! I can see this with 1" CPVC for scale model paints.

[@sixtyfiveford]

That would be cool!

[@gunny6128]

This is perfect for those brownells epoxy paint, you HAVE to shake them for 20mins!!! No more! I'm making this right now ! Thank you sir!!!

[@BrucesShop]

Man oh man How do come up with all these great ideas. thanks

[@sixtyfiveford]

Thanks, I'm glad you liked it.

[@hjboots]

I am just amazed at the things you come up with to help make our lives easier in the workshop. Thank you for sharing ( Stay Safe you & your family ) .

[@sixtyfiveford]

Thanks Man, I'm glad you liked it.

[@edwarddillon6016]

Great idea! Your dog is AWESOME!!

[@pappaclutch3266]

I just use a old Pringles can that I’ve duct taped for reinforcement, then a round head bolt through the bottom. I am sure yours is more robust but I didn’t have to spend extra money or go to the store again haha. It works good and I did enjoy those Pringles 😂

[@sixtyfiveford]

The Pringles in the process makes it worth it.

[@JDLarge]

I thought that’s why I had kids... oh well, they take too dang long anyway lol... Great idea, I’ve got a couple lengths of 3” pvc kicking around anyway from a hydroponics project, so now there’s a use for at least a foot of it... thanks for sharing with us, stay healthy, stay safe! 😉✌🏼

[@sixtyfiveford]

Kids.. Yes unless they get distracted are great paint can shakers.

[@theadhdhandyman]

Tbh i was skeptical until the water bottle was spun. I just ordered two plugs. 👍😁 thanks for the vid.

[@sixtyfiveford]

I played around with it for quite a while off camera, making sure it worked. I still have a habit of giving it a few seconds of stirring/shaking when it comes out, though not necessary.

[@yrtuag]

Sweet, great job! This alone is worth the price of admission 👍😎🤠🇺🇲

[@sixtyfiveford]

Thanks, I'm glad you liked it.

[@richtrueman5350]

Nicely presented, executed and tested. Great job!

[@sixtyfiveford]

Glad you liked it!

[@mikejones5358]

Ginger is so smart loved the video keep them coming

[@sixtyfiveford]

Thanks Mike.

[@Kyle-ev4fk]

Brilliant how did I miss this. I was sure I had watched all your videos.

[@Its-Steven]

I made one of these the way you've shown here, and then I made another using an old empty propane torch cylinder. I pulled the Schrader valve rinsed it several times with soap and water, then cut the end off. I deburred the cut end and dipped it a bit in a rubberized coating. I welded a bolt onto the screw end and pained the whole thing black. It works wonderfully.

[@alangeddes268]

Just made one as my carpal tunnel hurts shaking cans. Took 5 minutes to make and works great in seconds. Thanks for this one.

[@arthurdolle5257]

Great idea thanks, I use a lot of spray can paint and have been trying to think of a way to shake them up. This is much simpler than the things I've tried

[@davisdeluca4324]

Was looking for a simple paint shaker and I found ur channel...made one works perfect!!!...thx bud👍

[@KindCreature1]

I was on another channel where a guy was shaking the can the 'old fashioned way', and you can imagine the reference that was made by his neighbor. So i began to wonder about a DIY device that would keep ones mind out of the gutter. That's what brought me here. Good job, Sir!!

[@sixtyfiveford]

Thanks. Just another trick to throw into the arsenal. -Moe

[@Comm0ut]

I like the ball bearing test rig even better than the shaker. Built it and it works well.

[@TradeWorks_Construction]

my savior! i hate shaking cans, usually bust out an electric heater to preheat them to 90-100°F before shaking just to help the mixing process and avoid clogging the inside valve or dip tube.

[@peterparsons7141]

Thank you, thank you, thank you, thank you,thank you ! That has saved me from much pain. I was considering buying a professional paint shaker, now I will make one.

[@richeerich561]

Throw the cans into some warm water 1st too to warm the paint (unless you dont live in the frozen north like me lol) and you got the perfect setup for painting

[@ecream5068]

I just recently made this item and it works so well I am so happy with it thank you very much😂

[@stwhite5135]

Good Stuff. Your 4 legged assistant sold me. Subscribed

[@sixtyfiveford]

Thanks, I'm glad you liked it.

[@mikenunya5606]

Most of the time people in these types of videos produce a product that is just a waste of time and would normally not get used but you sir are a genius. I love to spray paint but sometimes won't just because shaking the can hurts my wrist. I will be building one of these and putting it in my paint cabinet this weekend

[@MikeyMack303]

What a great idea! Really simple and inexpensive! Thanks for sharing that with us!

[@sixtyfiveford]

Thanks, I'm glad you liked it.

[@arthilliker3721]

You just saved an old man with bad shoulders a lot of pain !! Left me asking "WHY DIDN'T I THINK OF THAT" ??!!! THANK YOU SOOOOOO MUCH !!

[@sixtyfiveford]

Thanks, I'm glad you liked it.

[@davidcoudriet8439]

This is so excellent, I am without words. I'm so sick of shaking cans, paint clogging the tube inside, etc. I'd like to try this with pint and quart cans too.

[@johnmapp7907]

this man is a genius

[@toddbarksdale]

That just earned you a new subscriber.

[@sixtyfiveford]

Thanks for subbing

[@aerialrescuesolutions3277]

Awesome. I've wanted something like this for awhile now. Jim.

[@StormyITO]

Quick simple vid for a quick simple idea. Well done.

[@sixtyfiveford]

Thanks, I'm glad you liked it.

[@brianriggin4560]

You my friend are great source of everyday guy stuff. Subbed just because it's the right thing to do.

[@Belzon1]

Brilliant as always!

[@sixtyfiveford]

Thanks, I'm glad you liked it.

[@ron827]

GREAT idea and I am going to make one. Leaving the rag out induces some eccentric oscillation. With the rag tending to center the can, the contents to include the ball bearing, rotate at about the same speed as the can and the real mixing takes place when the can stops. This is why we hear the ball bearing spinning when the can stops. Some start and stopping while holding the mixer at a 45º may help.

[@sixtyfiveford]

I've stopped using the rag and just let it bang around inside now.

[@ron827]

@@sixtyfiveford Thanks to your great idea, I have built three of them, two for friends, I too just let the can rattle around after finding the ideal speed. Thanks again for solving a problem.

[@theodorehile7921]

Add a strip of grip tape inside? It would take up little space and supply a bit of anchor for the can....

[@woodlandburl6648]

Simply, I like it! Thanks.

[@modtwentyeight]

I made 2 - one for me and one for my son. Greatest thing since sliced bread. Thank you!!!

[@sixtyfiveford]

That's awesome. I've been using it way more than I thought I would.

[@timhorton6485]

Your dog is a great helper and I am building one of these today

[@Peter-.H]

A time saving machine. I love it!! Great idea. Thanks for sharing 👍

[@sixtyfiveford]

Thanks, I'm glad you liked it.

[@campbejouc]

Practical & simple is good - further just put over one of spray can's waiting for some future use to shake that way you know its with the spray paint no hunting.

[@Rein_Ciarfella]

Found another use for mine. Slice a pool noodle lengthwise long enough to fit the can. Line can with enough scrap inner tube to prevent noodle movement. Insert paint pen and shake away! Works great and really fast!

[@Chriswoodworker]

Your dog has beautiful markings.

[@sixtyfiveford]

Hey Thanks.

[@dbayboyds409]

That is going straight on the build list! Love it!

[@sixtyfiveford]

Thanks, I'm glad you liked it.

[@srmofoable]

I use an old long sawzall blade with a worm clamp riveted to it. Does a hell of a job. Only downside is i don't usually have the sawzall laying on the bench

[@sixtyfiveford]

I've used the sawzall years ago for shaking. It took more time to swap in the custom blade and attach the can than I could have just shaken it by hand. Consequently I rarely used it. It did work well though.

[@patrickrede]

Started to make one of these, but the urge for potato gun overwhelmed me.

[@joeguilfoyle1922]

LOL, now you got me thinking :-)

[@BangBang-hk4rg]

🤘🤣🤘

[@spwan10]

Sounds like a blast haha

[@garrettgiuffre7298]

I need to make a ball launcher

[@wirekat]

I love this! I'm all over this! Thanks

[@sixtyfiveford]

Glad you enjoyed it!

[@CCWSig]

This is the exact content KZbin was made for! Neat little tip, thanks for sharing.

[@sixtyfiveford]

Thanks man, I'm glad you liked it

[@dashriprock6827]

Once I asked my girlfriend to shake a paint can for me I said just shake it until it stops rattling. She actually fell for it for awhile . 😂

[@bishopp14]

Bwahahahaha!! That's soooo messed up! 🤣😂

[@ericmoody3944]

We used to do that to newbies in the boat shop....

[@csn583]

Misread your name and thought this was your origin story... 🥺

[@guyh.4553]

Freaking awesome! Even cheaper, drill a hole thru an end cap, put a bolt & nut thru the cap & tighten down, glue the cap on, tighten onto the drill. Freaking perfect!

[@sixtyfiveford]

Actually the caps for this pipe size are nearly three times as much as the test plug.

[@supergimp2000]

This is the best DIY on KZbin. Period.

[@sixtyfiveford]

Thanks, I'm glad you liked it.

[@stevetyree8110]

Well done, sir! Simple and effective.

[@Its-Steven]

I just discovered your channel a few days ago, and I really enjoy your videos.

[@sixtyfiveford]

Thanks Steven. -Moe

[@jamesharber7820]

Fantastic idea. Thank you!

[@orriblecol6587]

Nice thank you for videos shown others with your atf fluid trick on paint and other bits they use it on there cars around 6 weeks to make it look new again even a automatic gearbox shop i just started working at has seen how well it works all on you thank you👍

[@sixtyfiveford]

Thanks, I'm glad you like the videos.

[@tron568]

Another spray can tip is turn can upside down spray until clear then store can upside down to prevent inside straw from getting clogged

[@sixtyfiveford]

Yeah, always a good idea.

[@farkookneebah]

I made one today, as soon as I saw this. Cheers champ

[@sixtyfiveford]

Awesome.

[@iFixJunk]

I love this! I am notorious for having cans that have sat so long that the paint needs more time shaking. This will save my shoulder and elbow! And I don't have to spend on another machine that will need upkeep and space. It will take up one can's space in my spraypaint cabinet!

[@sixtyfiveford]

Thanks, I'm glad you liked it.

[@PenRippyJr]

YOU’RE AWESOME THANK YOU

[@danielvelezdiaz5851]

the phrase,"out of the box" belongs to this man!

[@sixtyfiveford]

Thanks, I'm glad you liked it.

[@Willy12927]

Great idea. These 74 year old wrists and elbows really thank you.

[@OldSneelock]

Cool idea. Love the dog training session. 😁😎

[@sixtyfiveford]

Thanks 👍

[@TrojanHorse1959]

Great idea and build, thank you! I built one some time ago that works with my Sawzall. Now I can make one for my drills too!

[@steven.h0629]

Same here.. long blade, electrical tape, variable speed.. just don't overdo it 👀

[@thomashverring9484]

The dog sold me!

[@RoisinBxox]

This is genius. I have (what is probably) a stupid question though, does mixing the paint in the can like this actually work? I always thought the shaking had to be vertical, as in so the ball in the can travels from the bottom to the top over and over, to properly mix the paint? Has anyone used this for spray paint and it works well? Just want to be sure it does a decent job as I'm going to have to buy a power drill to make it and don't wanna waste my money if it doesn't have great results. Thanks for any advice and again, great video.

[@Guillotines_For_Globalists]

Yes it works. The ball just moves around in the paint can to mix the contents. It doesn't matter in what direction the ball moves.