Easily Fix A Slipping Belt or Drive on an MTD Push Lawn Mower

[@aasmallengines-toronto9687]

Taryl, Even though I've been in business of fixing small engines for the past 10 years, All your smart techniques have made things much easier for us to fix. Thanks for the videos & hope to see many more of your tricks!

[@TarylFixesAll]

+Aa Small Engines - Toronto Thank you & as always Theres yur Dinner!

[@shaneabston6373]

This is literally the only video online on how to solve this issue.. thank you kind sir

[@ApprenticeGM]

Great trick from a practical genius! Does my head in that the designers & factory builders can't get this kind of stuff right the first time.

[@dennisnull4225]

Thanks, I did hit a root last year pretty good and pushed the deck back into the blade good enough to put a gash in the deck on the left side. I just replaced the deck account of rust holes also, I wanting to get it right before I start using it again. Your videos have been very helpful for getting everything back on the right way and even went out and bought some anti-seize. I will go and check to see if I do have a bent blade, I just put it all back together a couple of days ago and I am wait for one of the springs that is ordered to go back on the deck. Thanks again for your help.

[@TarylFixesAll]

+Dennis Null I have a tool that checks for a bent blade but you can stack your blades. That will show if you have a bent one or just buy a new set.

[@kentuckylucky8316]

OH MY GOD DUDE. I STUMBLED ACROSS YOUR CHANNEL AND I LAUGHED TILL I CRIED WATCHING THIS VIDEO. LMFAO. YOU ARE REALLY GOOD AND ENTERTAINING. YOU GOT A NEW SUB HERE.

[@bigtime4698]

Great video man 😆 had me laughing all the way though

[@alloutperformance8788]

LOL that was no doubt funny and really appreciate the repair suggestion. Keep up the good work man!

[@TarylFixesAll]

ALL OUT PERFORMANCE thanks fer watchin'!

[@3DMachines]

I like the dance moves! We use those same jackets to weld in.

[@dartvader9939]

Love this fix taryl! Thanks for the dinner

[@MrJoe11young]

Gold, pure gold Taryl.

[@timwilliams9443]

Thank you Mr. Taryl

[@peachesandoreo]

Again, love the innovative problem solving. Brains, the most important tool in the toolbox. Yer purty smart Taryl.

[@sendit1158]

Genius at work

[@loniedavis1167]

LIVE FOR YOUR VIDEOS ! THIS IS ONE I REALLY NEEDED TO SEE ! THANKS GUYS !

[@dennisqwertyuiop]

watching lots of your videos they are great and you are a pro and funny too

[@skyartrc8286]

Dang your the man taryl

[@MultiChainsaw123]

great job I learn so much from your videos thanks

[@TarylFixesAll]

MultiChainsaw123 Thanks chainsaw 123, And thars yur dinner

[@mortneff4674]

I like that fix!!!

[@loc645]

HELLO THANK YOU FOR SHOWING HOW TO FIX THE BELT COOL VIDEO

[@smileamildr]

excellent style of presentation...

[@MajorHorstPower]

Pure Gold guys. As usual!

[@nabeelw2]

My Troy Blit has a different setup but was able to replicate your technique. Thank you.

[@stevefick3919]

If he says, "Boogity, boogity, boogity" just one time, I ain't never comin' back to these videos!

[@TinyTexasShop]

Youll be back

[@thomascooper6679]

Positively brilliant idea. My stupid pos Black Max lawn mower has a drive cable with no adjustment feature so I may be able to adopt your clever repair to my situation. VIDEO IDEA >>>> maybe can you do a video on repairing wobbly push mower wheels by removing the worn out axle sleeves (bushings) and pressing in new ones? The main problem is finding replacement sleeves (bushings), they just don't sell them and make you buy a whole new wheel for $20 or more. Often times the axle diameter is worn out also. What does Taryl have in his bag of tricks for that?

[@redeemedn0787]

I love this guy. I claim you as my uncle.

[@walleyewilly8085]

Great video guy's. Keep them coming. Billy Bob Thornton would be proud of yer quality episodes.

[@1075twist]

"Feel good video of the year" -Modern Mower Magazine ha

[@clydeking4265]

Simple, smart and effective. Genius!!!

[@petefroud5308]

So simple but so clever , What a great fix.

[@jcook8191]

Awesome info on all your vids👍🏻

[@scottwilliams8980]

Hey Taryl, how about a video on fixin a self propelled rear drive Craftsman push mower that the rear wheels are slippin and sloppin?

[@ketotrucker6262]

Great fix , thank you for your time.

[@mikeanthony3986]

Smart fix ,great job.

[@johnobiro5202]

Great tip.

[@steviebaby2857]

Funny and functional love it

[@haydenshores9943]

Hey taryl Ive got a new Scag push mower 21 inch and after about 30 minutes of mowing the self propel will stop and then after I wait it'll go a little more then stop fully tell I wait about 5 minutes any ideas?

[@jackfishbill3931]

Nice fix Taryl.

[@donniecoleman1324]

Taryl, question, loved the mini bike three wheeler. How did you make the reverse on it. I have a golf cart that I would like to put a gas engine in it, but I need a reverse on it. Any suggestions?

[@alfredobonilla3021]

Genius pure genius!

[@dennisnull4225]

Do you have any videos on how to level your mower deck on a Craftsman LT2000 42 inch late model riding lawn mower?

[@TarylFixesAll]

+Dennis Null First, did you hit something? If you did you need to check & see if the blades are in line put them Tip to tip , They should line up If not the deck shell is bent or you have a bent blade. Also check tire pressure Uneven tire pressure will cause bad cut. Make sure you don't have a broken deck link that will cause uneven cut if those things are good then Check out Taryls tools every lawn mower mech should have part 1 they make a tool for checking deck level . Can buy from the Interscreen. Try those tips & theres yur Dinner!

[@moondogdieselworks3883]

Awesome!!!!👍

[@jimmiehoward4471]

Dam I love this guy!! Thank you!! You rock!!!

[@carllheureux3324]

Thank you

[@Jimmyzb36]

That was a big 10\4 FIX!!!!!!

[@ninawade3055]

How smart! Thanks

[@19491Tommy]

I have a craftsman 17hp lawn tractor with a 42" cut...... the blades wouldn't engage, so I removed the deck, then the belt, and I found the idler pulley had grass built up under it that prevented the pulley from fully engaging. The cause of the grass build up was a 2' hole in the deck. I had the deck welded and reinstalled with a new belt. I was ready to cut grass. Everything seemed perfect until I hit some high grass and the blades slowly stopped. I heard you mention that there was a way to tighten the tension on the belts on another video. Can you refer to me that video or tell me how to tighten the tension on my craftsman belts.

[@thehammersfamily3943]

Hi,I have a question,I dont have the spring that goes to that tension thing you put the screw in.What can I do or where can I find one that will work?

[@kevincain5390]

belt tension spring 732-1043

[@closertothetruth9209]

love it

[@PerrynBecky]

Hey Taryl, do you have a video on a rear drive MTD push mower? Mine keeps throwing the belt. The trans pulley looks like it's in good working order, and the guides are still in place, but the belt throws off just as fast as I engage the clutch. The belt is only 1 month old too. I only cut the lawn 3 times with this replacement belt before this started happening again. The guides on the front cover at the engine pulley aren't worn through, but I'm wondering if they are worn enough to allow the belt to slip by the pulley? Any help would be appreciated.

[@JOEZEP54]

Nice fix! Thanks

[@stevecraig9384]

The best

[@buddyboy1953]

Man O Man,do you know your stuff !!!!! Great video,thanks

[@DavinderSingh-lp5rt]

hello sir i have old hahn tiller, can you tell me how to tight tine drive belt.

[@BenjaminGoose]

Great idea!

[@johnkosheluk1041]

Smart i like that Ida I have a lot of thoes come in to were I work thank you Terry

[@davidabraham3873]

nice trick

[@TheNorthernMist]

you are the absolute cat's meow :-)

[@Goomer]

Nice fix

[@dawnbeth1]

Bent shaft push mower, can it be straightened. Briggs and stratton engine

[@scottfirman]

What about one that walks too fast? Got a Yardman that makes you about run to keep up. RPM is set factory so this is a new one for me.

[@kevincain5390]

Walk faster

[@thehammersfamily3943]

Your silly as heck but SMART AS MAGYVER!LOL

[@dennisnull4225]

Thanks, I will try that today.

[@quadlinear]

another Gr8T video

[@andrewdickson9964]

I have a toro slipping will check if i can do this on that one 😊

[@insaneasylum7898]

pretty dang smart idea

[@charliepearson1678]

Good one T-D ...gotta wonder why mtd didnt think of that .

[@01dooman]

if any one could tell me a link to the wiring diagram and how the key switch works ( kill wire ) hookup ,, and test for charging and the likes that would be great !!! really need this unit up and running asap ...66 sears suburban 12 hp techumseh

[@pentiuman]

Too much slippitty-slopp will ruin a marriage!

[@kennethconnors5316]

there can only be one Taryl

[@randymay5082]

Taryl older Sears 6-75 push mower 22" belt, wheels, drive gears good shape when engaged wheels don't turn

[@kingtut5923]

your my man

[@jonmyers8046]

SCHWEEEET! I would give up my whole can collection for that...maybe even some of my bottle caps too!

[@joshuahuang07]

damn that was genius

[@Hammerjockeyrepair]

I used to just stretch those springs way out!

[@jamesphillips9750]

Dam good video,take care.

[@baltin44]

5:41...🤣😂🤣😂🤣😂👍👍👍

[@BenG123]

JC that was ridiculous, but nonetheless helpful. Great innovation.

[@davidthorne6796]

Awesome! They don't teach that sh't in no lawn mower school!

[@dam1041960]

Yes some times but on the qt. Been there done that. A former outdoor power equip tech.

[@kevincain5390]

My belt slipped of pulley because all the crap under the cover and when I looked there was no spring,only bolt. Spent 45 mins looking for a similar bolt to temporary hold me. I would rather do this than spend 15 dollars on a spring that probably wont work as good as what i have right now.

[@victoryfirst2878]

How about a John Deere self-propelled SJ 63 walk behind mower with a noisy squealing gearbox ?? Can you help me with my dinner ?? Thanks

[@joebriggs9599]

nice.

[@jefffuller3456]

Hell yeah, f buying a new belt

[@JodBronson]

Taryl Taryl Taryl..... WTF DUDE? Slipping Belts = *Slippers*

[@JodBronson]

LOL - Poor William !!!

[@mrtechpat]

Where the cable hooks to there’s a crack in the plastic piece

[@billydankert1764]

It looks like a 5/16 bolt ! Lol

[@PSN7373]

That's junior

[@jbstepchild]

Super entertaining that's so shit right there good stuff I just subbed to the shit

[@esaumoreno7405]

Wtf makes me look like a dumbass 👏👏👏

[@JodBronson]

LOL

[@paulgumper]

Painful to watch, but just what I needed to fix my free on the side of the road mower. Thanks!

[@TarylFixesAll]

Thanks! Glad you enjoyed it!

[@gilbertoestrada135]

I tried your method and it spun. But had no torque

[@JodBronson]

+gilberto estrada - New Wheels next!

[@gilbertoestrada135]

I looked at the teeth inside and nothing was shaved . 🤷‍♂️

[@JodBronson]

+gilberto estrada - In this Video, he was fixing the " Belt ". There are " Teeth " on the belt?????

[@gilbertoestrada135]

Jordan Bronson you mentioned the wheels. So I mentioned I looked in and the teeth in the wheel are good.

[@JodBronson]

+gilberto estrada - Trans-axle would be next!

[@bradbeasley7669]

damn it jr no make up haha

[@deme7063]

skinned knuckles

[@berardia4]

Or you could just replace the worn out belt.

[@durandtopping3023]

😂😂😂

[@hughrs]

Or buy a new belt because that one is clearly worn out and is down in the V of the pulley too far

[@carmangary]

You cant stop the mower no more.

[@andeechris]

That's your supper

[@pricetag30]

You could probably make decent videos without all the nonsense!

[@volcanic596]

What a waste of time. Seriously?