Easy Concrete Marble Trinket Tray | Soap Dish | Cylinder Holder For Beginner | Cement Craft

[@ranetmathias765]

I have seen so many videos on cement but this video is so amazing and so clean work❤

[@BearBearCammy]

Thank you so much 😊

[@woodworks2123]

If you added a small amount of plasticiser to your mix, it would make it flow better into the mould. We make a host of concrete moulded products and it makes a huge difference.

[@BearBearCammy]

Thank you so much for the sharing!

[@PaulineCorlis]

Which sealant did you use plz

[@gulakram6058]

What's that

[@Zappitos]

Preciosos vídeos !! Se podría dar un barniz mate encima del cemento

[@egyptian_handmade]

You can add white glue to ensure the strength of the piece

[@imbalenhle_k]

Before or after the sealant?

[@justcraftiness]

love how you did the painted initial on the stationary holder! and even painted gold border, very detailed

[@BearBearCammy]

Thank you ❤️

[@annabellevaughn5968]

I like the matte and gloss equally:)!

[@Girox4x1x3]

Such a great tutorial - thank you

[@honey562012]

So can Portland white cement work for this? If so, i can make candle holders. Thanks for sharing.

[@ArtyCraftyDeeksha]

I like the tutorial and your captions are awesome… thank you dear ❤

[@BearBearCammy]

Thanks dear :)

[@RajathaDilshan]

Do you add anything to the cement to prevent the pot from breaking?.

[@lauraribeiro6912]

Hello, how did you clean your mold, I did and my mold was stained black, beautiful work, I loved it!!! I made one just white and it came out with black spots.

[@BearBearCammy]

Hi, try this method on how to clean your mold. But if the colour stain already absorbed into the mold, i think there is not way cure. Just get a new one if it affected your new project. Else just leave it that way. kzbin.info/www/bejne/ammUaqSEl9Jpg5o

[@BornoB-v1d]

Can i make candle jar with white cement

[@MissRaccoon3]

Thank you.Very nice tutorial. Are you using a releasing agent to help unmolding and if you do,what do you suggest?

[@BearBearCammy]

Hi, actually this is the first time I heard about releasing agent. Thanks for sharing. Nope. I just demold this way. The cement is very easy to get off from the mold.

[@gayatrichaurasia6928]

Mem apne 2 cement konse use kre..?

[@cindyshirld]

What sealer are you using?

[@BearBearCammy]

Hi, I’m using lacquer :)

[@malaikatimrah8908]

Neatness ka liya aisko sand paper sa ragar sakta h ??

[@BearBearCammy]

हां, आप सैंड पेपर से फिनिशिंग कर सकते हैं।

[@LesleyIkporo-gw8vw]

Is the color acrylic

[@BearBearCammy]

@@LesleyIkporo-gw8vw yes it is

[@Alltime_funto]

Enlighten video. I didnt get how you get the gloss finishing. Please tell me

[@BearBearCammy]

Hi, just use the gloss sealant will do. :)

[@alishbairshad2435]

Plz tell me one thing if we want to add water plaster paris and white cement would they mixed together also write their ratio

[@BearBearCammy]

@@alishbairshad2435 I don't mix the 2 powder together. If you know the ratio please share to me 😊

[@KkTank-yi4ee]

Thanku for this video , really very helpful ❤👌

[@BearBearCammy]

Glad you liked it

[@stephenhko]

can you share more detail on what type of sealant you're using and what brand is it? Thank you! Loved the video, very inspiring!

[@BearBearCammy]

Hi, there's a video for this. You may click at the link in the description.

[@varundhingra4655]

We can use any acrylic colour?

[@LR-fz5us]

Es mas resistente l cemento solo que cemnto con yeso? Y se puede usar para alimentos?

[@dumbpenquin]

where did you buy white cement from?? can you please provide a link

[@BearBearCammy]

There aren't any link. I got it from my local hardware store in Malaysia.

[@dumbpenquin]

@@BearBearCammy ahhh okayy thanksss

[@vanshikasharma5294]

This is not breakable ??? it will not break if we use cememt

[@lolimoh6210]

can i use acrylic color

[@BearBearCammy]

Yup sure u can ;)

[@ShardaChand-yb2rb]

So beautiful 💗

[@BearBearCammy]

Thank you ❤️

[@skinncare_therapy]

I bought a cement tray which came broken, is there any way to repair it?

[@BearBearCammy]

Sorry hear that . Is that bad? If the tray broke into 2 pieces, you can try to use grout tile powder to stick them together and sand it on the surface. This can hold for some time. Do not use any adhesive to glue it because it can't hold long. Good luck!

[@sweets5027]

Do you dip it in water for curing?

[@BearBearCammy]

No i didn't except during wet sanding

[@CarstenRueffer]

what kind of cement did you use and what brand please

[@BearBearCammy]

White cement. No brand.

[@krinashah5464]

Can we use silicon mould ?? Please reply

[@BearBearCammy]

@@krinashah5464 in my video I'm using the silicon mould. Do you miss out anything? 🤔

[@krinashah5464]

@@BearBearCammy no i whole video but i thought that it's plastic mould 😀🥲

[@BearBearCammy]

@@krinashah5464 haha no! Plastic mold cannot be reusable 😅

[@krinashah5464]

@@BearBearCammy oh yeah 😄

[@anafds69]

Can I add little fevicol in it?

[@BearBearCammy]

Hi, i never try that but some people say can.

[@makica7263]

I like this! You make with white cement?

[@junaidjaved1711]

Which material you use for finishing?

[@BearBearCammy]

You can check my sealant videos: kzbin.info/www/bejne/gaOqmoitgKxgrK8

[@kopigoji4728]

Can i used for cup of coffee?

[@BearBearCammy]

Hi, as this is cement for renovation use, I will not recommend. This is not a good friendly material.

[@momoycheng7468]

What type of cement u use. Look so creamy. I wanna try

[@BearBearCammy]

White cement

[@loveiseternal1995]

So we dont need to fire this in a kiln like we do for clay items?

[@BearBearCammy]

Cement and clay are 2 totally different materials 😳

[@loveiseternal1995]

@@BearBearCammy Yes I know but since in ceramics we do firing and glazing which seals the holes and gives a great finish , how do we do the same for this? Just wanted to know since I am planning to do this

[@BearBearCammy]

@@loveiseternal1995 it's not necessary for this :)

[@loveiseternal1995]

@@BearBearCammy Thank you so much

[@AwakenedLives2024]

What kind of white cement is that?

[@BearBearCammy]

I guess somewhere from Portland?

[@riqie]

Can i ask a question? Are they umbreakable?

[@BearBearCammy]

Cement is resistant but will still break if fall from high place.

[@stilletto111]

Instead of adding the ink with the cement, have you tried dripping it into the mold itself then pouring the cement after? I think it would look great. But you did as i see it, it looks really beautiful already.

[@BearBearCammy]

I never try that but good idea 😀

[@sharifahnuraqmawanhabibism8242]

Hello may i ask what is the purpose of covering the cement for 30 mins ya? Thank you! ☺️

[@BearBearCammy]

Previously I cover it so that the dust and my dog fur won’t flew into it. It’s actually not necessary. Since we are going to sand it anyway 😅

[@sharifahnuraqmawanhabibism8242]

@@BearBearCammy hahah ah true also! Thank you for replying my comment, appreciate it ✨

[@BearBearCammy]

@@sharifahnuraqmawanhabibism8242 You are most welcomed and thanks for the subscribe. It really meant a lot for me 🥰

[@zuikis8]

Hi. Great video. Do you know what could be the reason if acryl does not dry? 😢

[@BearBearCammy]

Hi, there are some people here comment on their cement won’t dry too. So far I don’t have any issue with the cement with my country here. Perhaps you wanna try with other brand? Make sure is it Portland cement and never mix with any plaster. I don’t think it’s the acrylic issue.

[@AnaGonzalez-my7bi]

Hello I love your videos... I have a question please. Is it pure cement or do you add something like sand??? 🙏 Te escribo desde Perú

[@BearBearCammy]

Nope.

[@henryfehr6202]

Pure cement is not strong. Cement is the glue for mortar and concrete. If you mix 50/50 cement to silica sand you will get much stronger items. Also water to cement should not exceed .35. if you want it wetter you need to add super p.

[@huieshi2777]

Hi ,if not have sand paper ，just direct use soap it's okay?

[@BearBearCammy]

Well can, depend on you. But if you sand it, the surface will be more smoother and give you better finishing. Some edges might be sharp. But if your cement came out perfectly smooth then sanding is not necessary. But sealant is a must.

[@priyancagupta9052]

I've been using white cement and silicone molding, but each time I attempt it, it ends up cracking. I'm not sure what to do.

[@BearBearCammy]

Hi, you can try to refer to my FAQ video: kzbin.info/www/bejne/p4aWfouObs12hassi=Pbu2qyXCy9jWZ0EM If that doesn't solve you issue, try to change to another cement.

[@abbeyjohn9519]

What is the ratio when i am making its breaking can you please tell me the basic ratios

[@BearBearCammy]

@@abbeyjohn9519 hi the cement ratio I'm using for this is 1 part water and 2 part of cement.

[@abbeyjohn9519]

@@BearBearCammy thanks 😇

[@onabanjomotunrayo7637]

Can you tell us how many gram of the white cement and water pls

[@janhavibhosale270]

Which cement do you use

[@BearBearCammy]

White cement.

[@loradietmeyer4416]

Where did you get the molds?

[@jcrivera5364]

Are you using plaster cement?

[@BearBearCammy]

I'm using white cement only.

[@rohanroy1451]

mam..where i can buy this rubber material..for making pot??

[@BearBearCammy]

The most easiest way to get it from AliExpress. They ship international and the price is cheap too. Just search for silicon mold. It will came out any type you want :)

[@rohanroy1451]

@@BearBearCammy mam..problem is i dont have credit card

[@sanubadi3106]

Which cement use??

[@BearBearCammy]

I'm using white cement without any brand on it. This i got it from the local hardware store.

[@Hindistories_GKforkids]

Is it the white cement mam

[@BearBearCammy]

Yes it is.

[@jinama175]

Very nice!!! Where can I buy white cement?

[@nanjeebasdiaries]

Hardware store

[@maryjoanneaninon2805]

Hello. Did you use white cement?

[@BearBearCammy]

Yes I’m using white cement :)

[@johannaruiz4236]

Hello, I have a question, do you immerse your pieces in water at the end before applying the sealant? I have read that this must be done to make it more durable..

[@BearBearCammy]

Nope I don’t do that. It has to be completely dry before applying sealant.

[@johannaruiz4236]

@@BearBearCammy Of course bit i saw that dime people recommend do that for 4 tours aprox then let it de y and then apply sealant… im from perú btw 🤭

[@johannaruiz4236]

My question wa made because i want to be sure that the piece dont break easily

[@BearBearCammy]

@@johannaruiz4236 I’m not too sure about that. But so far the white cement I’m using is quite durable. Thank for dropping by 😀

[@johannaruiz4236]

@@BearBearCammy thank yoy for your time

[@hafsahaliyu5030]

I know this is an old video and I’m praying you respond. How do we get the exact measurement of the powder for the mold to be used to avoid having too little or too much mixed powder? Is there a measurement for that?

[@BearBearCammy]

Hi, you can try to weight your mold (A). Add water into the mold and measure again (B). Use (B) minus (A) to get the water measurement. Add about 5-10% to the water measurement. That will be the weight of the powder. Hope this help.

[@hafsahaliyu5030]

@@BearBearCammy thank you so much for your response

[@kamikadze1300]

I use acrylic paint but then after the vessel is done I get dirty hands while holding the vessel - although it’s sealed… Not sure what I might be doing wrong, any ideas?

[@PP88889]

Потому что в этой технике нельзя использовать акриловую краску. Только сухой или жидкий пигмент для гипса/ цемента.

[@rozza9553]

Normal water or warm?

[@BearBearCammy]

Normal tap water will do

[@jacksonjoseph1446]

Is it possible to make these with 'stone plaster' instead of white cement . Which will be strong??

[@BearBearCammy]

Do you mean aroma stone powder? The plaster to make the aroma stone?

[@jacksonjoseph1446]

@@BearBearCammy no stone plaster is same as (PP )and in blue colour

[@BearBearCammy]

@@jacksonjoseph1446 I wish to try but there is no such material in my country ☹️

[@jacksonjoseph1446]

@@BearBearCammy thanks no problem

[@nevillec5252]

@@jacksonjoseph1446 Do you mean PoP, as in Plaster of Paris? Plaster of Paris should never be exposed to water once set - it will dissolve. I don't know if the "stone plaster" you mentioned is a different material.

[@sunniagulbahar9145]

U are using just white cement, what about pop?

[@BearBearCammy]

Only white cement in this project.

[@miklosdenes448]

Beautiful job, nice to see your passion in action 😍👍😘

[@BearBearCammy]

Thank you ☺️

[@tokaosama3481]

Hi .. this video is so helpful Would you make a video for sealing method and types of sealers please?

[@BearBearCammy]

Okay will think about it ☺️

[@aartibhadsale7406]

Which sealent do you use? Sealent name for both matte and gloss

[@BearBearCammy]

Hi, for gloss sealant my using lacquer from Mr Diy (available in Malaysia only) and for matte sealant I’m using Krylon matte :)

[@aartibhadsale7406]

@@BearBearCammy thank you

[@OceanBlue455]

Excellent 👏👏👏

[@BearBearCammy]

Thank you! Cheers!

[@kousartaj4567]

Whr do we get those moulds

[@BearBearCammy]

All links inside the description.

[@mariasalomesantamaria8304]

What can I use to polish

[@BearBearCammy]

Sandpaper 200 grits and finish with 500 grits and above

[@momoycheng7468]

How to avoid bubble? Any tips gais ?

[@BearBearCammy]

You cannot 100% avoid bubbles. You can only reduce it. You need to release it no matter what.

[@rohmaimran3636]

What is the ratio of cement to water ?

[@BearBearCammy]

Cement 2: 1 water

[@thenaturallstore]

Hi how do you seal it?

[@BearBearCammy]

Hi, I’m using lacquer as sealant.

[@innedons4137]

What kind of cement you use? Its so nice

[@BearBearCammy]

hi, i'm using the normal white cement from my local hardware store.

[@amyasmr95]

I really wish you to get more subscribers and views... ❤️

[@BearBearCammy]

Thank you so much. That is so sweet 🥰

[@yoonelleen6131]

Is it white cement

[@BearBearCammy]

Yes it is ☺️

[@phoopyae7614]

Is it waterproof??

[@BearBearCammy]

Yes if you apply a very good waterproof sealant. But this is good enough for high water resistant.

[@phoopyae7614]

Thanks for reply❤️

[@md2664]

Nicely done ✔ 👏 👍 thanks for sharing

[@BearBearCammy]

Glad to hear that 😀

[@shrutimisrasharma6663]

wow!! i really loved your trinket tray! what sealant do you use?

[@BearBearCammy]

Thank you. I’m using lacquer to seal it ☺️

[@shrutimisrasharma6663]

@@BearBearCammy oh thanks, interesting. thank you! Much appreciated your response. :D

[@artzacraftsbyzara9629]

Beautiful!!! Just want to ask that should I use varnish after painting on white cement projects or before it? For planters, will the white cement planters leak or break? How to avoid that? Thanks a ton if you can help please

[@BearBearCammy]

Advised to put a sealant after your project and follow by varnish.

[@artzacraftsbyzara9629]

@@BearBearCammy Thanks a ton for answering. Also, can I use chalk paints (I don’t have multi purpose paint in my country) for the paint to stay on outdoors?

[@harrys_love]

I don't have the mould :(

[@shortsgrower]

I have few doubts, 1. Can I use gypsum powder? 2. Should I use water to mix? 3. What is the wax coat to get smoother and glassy finish ?

[@BearBearCammy]

Yes you can use gypsum powder too. Some gypsum is as hard as good plaster. I never use a wax coat as sealant. But you can refer to this video on which type of sealant that i am using: kzbin.info/www/bejne/gaOqmoitgKxgrK8

[@JiyaAli-c3b]

Paints link please ?

[@BearBearCammy]

Link was already inside the description.

[@09Melina]

Very nice 😍

[@BearBearCammy]

Thank you :)

[@aphrodite9267]

This is so useful, thank you; but can we use resin molds?

[@BearBearCammy]

I’m using resin molds 😉

[@jennat3209]

Do you add any aggregate to the cement? ie: crushed stone or sand - or is it strictly the cement?

[@BearBearCammy]

Stay tune for my upcoming video on this :)

[@ana_neuro]

do you coat them with something to make them long lasting? sometimes they break a little after a few weeks.

[@BearBearCammy]

Yes, i did applied coating on them. You can refer o the type of sealant that i used. kzbin.info/www/bejne/gaOqmoitgKxgrK8&ab_channel=BearBearCammy

[@green4rt]

Great work

[@KIRUBAKINGSLYJV]

How do you measure the quantity of mixture needed for each moulds? How to find for coasters, trinklets etc??

[@BearBearCammy]

I don't really measure it. Normally i will just scoop in 3-4 in it. Perhaps next time i will try to take the measurement. Thanks for the highlight :)

[@KIRUBAKINGSLYJV]

@@BearBearCammy appreciate your reply... Cause I just keep making insufficient mix or excess wasted mix even with a spare mould.

[@Showmake]

Don't you need to add sand? Pure cement seems to break easily.

[@BearBearCammy]

No sand needed. The cement I bought is strong as stone. It never break or crack 😉

[@maheenmohiuddin6758]

@@BearBearCammy Hi, can you tell which cement did you use for these pieces?

[@aaronchambers9888]

@@maheenmohiuddin6758 no she won't because it's not really that strong

[@falgunitrivedi656]

White cement doesn't need sand

[@egyptian_handmade]

The cement is solid But gypsum breaks down quickly

[@amoleeklove3175]

I did a DIY using cement and water to make a coasters. 2 weeks after I was cleaning it up and because I used my hands to pat on it, it broke. Did I do something wrong?

[@nivukachishi5206]

air bubbles?

[@nusratsuhail3219]

Same happened with me

[@AVMArtistiqueFusion]

What you used to seal?

[@avadhootdarbhe147]

I made this tray kept it for 24 hours But after 24 hours i can break it with my hand and it break even if i throw it from 6 inches Whats the solution

[@BearBearCammy]

White cement is superb durable and hardly get break. I have made a FAQ video previously. Hope this help: kzbin.info/www/bejne/p4aWfouObs12has

[@avadhootdarbhe147]

@@BearBearCammy that's what it's breaking what is the process after 24 hours. should I keep it inside water for cpl of days??

[@MissRaccoon3]

thank you

[@marga199595]

How long does it take to dry?

[@BearBearCammy]

24 hours

[@cindylawrence1655]

Hello, lovely video :) can I ask what kind of cement you use? It's so white and smooth!

[@BearBearCammy]

Hi, I’m using the normal white cement, I think it should be Portland brand.

[@woozy607]

Just Portland and water? Seems like they would break in half or have a lot of little cracks in them

[@BearBearCammy]

@woozy607 I sold many of them. So far no break or complains. Hmmm... 🤔

[@woozy607]

@@BearBearCammy I did some research, white cement actually is Portland cement w/ clay additive. I figured it must have something mixed with it because Portland cement along is very weak, gray Portland cement is just cement and needs to be mixed with sand

[@dibiodepaint]

Keren👍👍👍

[@loradietmeyer4416]

The soap dish mold I love, where did you find it?

[@BearBearCammy]

Hi, all moulds I got it from taobao but you can get it from AliExpress too. I have just add the link in my description :)

[@loradietmeyer4416]

@@BearBearCammy thank you.

[@marisacolosimo3738]

My cement is not drying…why?

[@SIMONETTA69]

Mucha agua. Debe quedas espeso como un yogur y revolver mucho rato.

[@janesantos_centelhadivina]

👏👏👏👏

[@ayuramadhani1335]

My cement is bubbling so much :(

[@BearBearCammy]

You need to tap longer next time 😉

[@kimmcmahon9682]

Matte is better!

[@BearBearCammy]

Matte is better but for soap dish glossy will be more outshine and suitable 😃

[@blakeseufert7340]

covering for 30 minute NOT OPTIONAL folks ;)

[@BearBearCammy]

Oops sorry, it should be OPTIONAL. Thank you for bringing up 😀

[@blakeseufert7340]

@@BearBearCammy keep up the creative videos 👍

[@antoniettaterrasecca8409]

Se non è tradotto in italiano non va preso in considerazione