EASY FIX: Microwave Will Not Heat and Turntable Will Not Spin - How To Fix A Broken Microwave

[@jeffklein7223]

After my microwave stopped working I started shopping for a new one. That's when I realized I had a microwave/convection oven worth about $2000. I can't thank you enough for the video. I got it fixed with a fun project with my son. Thank you very much!

[@TightWadDIY]

Yes! I’m glad you found the video and were able to get it fixed! I’m also happy to hear your son helped you.

[@RickyHussmann]

I'll add on here; thank you very much for this video. Our microwave exhibited this exact same behavior the weekend before I was going to leave on a business trip. Leaving my wife and toddler without a functioning microwave (and parent for a few days) would have been a real hassle. Was able to get everything fixed up and working again in an afternoon before the trip; I even had a spare switch in my basement in some old parts. Thank you so much for putting this together, I really appreciate it.

[@TightWadDIY]

Thank you! I’m glad you found it helpful and were able to get it fixed quickly!

[@pgutz629]

Thank you so much for this video. I was able to fix my neighbor's LG microwave oven that they are about to throw or recycle. I am a very handy man but I will admit I don't know how to fix it and I told my neighbor. He told me just try and I've checked and seen a lot of videos regarding this problem but yours Sir is very educational and more appropriate and exact to the point.

[@TightWadDIY]

Gutzie Gutz Thank you for the kind comment. I’m a teacher by trade so I try to apply those skills when making easy to understand videos.

[@karnailsinghbawa6185]

Thank you so much.. I repaired my Microwave oven with your guidance. In my case, it was a a two way switch at the same location. The terminals had got heated and the button click was not very prominent. The old switch worked intermittently, replaced it with a new one and got my oven working. I was earlier too doubting one of these switches, because my overn sometime worked well, but did know exactly, which switch is for what. My oven has three door switches, one on the top and other two at the bottom. the top is for light, the centre one is for turntable and magnatron, still don't know what is the function of the third, last one. `that is a one way switch and I found it ok using my multimeter. Really appreciate your video. Great job.

[@TightWadDIY]

I’m glad it worked for you too!

[@edbennett3511]

My wife found your video on how to fix this problem and it worked like a charm ! Thanks for helping out the common man !

[@TightWadDIY]

Great! I’m glad you were able to get it fixed.

[@Virtuenow]

I’m back. I watched like 30 more vids and came bk to yours as my main reference. I opened my microwave and found the capacitor had a protective box covering and I didn’t know how to (nor did I want to) remove it. No other video had this box blocking the capacitor- I guess mine is super high tech (??). It was tempting to just remove the door switch but I used safety & refrained. I took it to repair shop and it cost $125 to replace the door switch and some wires per the repairman (I don’t know if the wires were really damaged but I obliged). I know I can buy a new microwave (and I did, several actually but none compared to this one), so It was worth it for me because I love my microwave!

[@TightWadDIY]

I’m glad it’s working. Sorry the repair man charged so much for a $5 switch and 30 min repair.

[@keithwolzinger7085]

Had this exact issue and followed your procedure. Bought new switch for less than $5 and we are back in business. Thank you!

[@TightWadDIY]

Keith Wolzinger That’s great! I’m glad to hear you were able to get it working again.

[@MooooonRiverWiderthanTimMoon]

Dude? Phenomenal...All I needed to know was no rotating turntable and no heating and you solved it...easy fix for our 2008 LG...still might get a new one, but very glad to be able to take our time and actually have a working microwave. I replaced all the switches for $25, then noticed the non-working one...so have 2 extra now...I'll eventually give this one to a needy family...or we'll procrastinate and keep using this one...thanks again!

[@TightWadDIY]

That’s great! I’m glad you were able to get it back up and running!

[@kevinm.4784]

Awesome video. Lower switch was my issue just like you said. Thanks for taking the time to make these great instructional videos!

[@TightWadDIY]

Coastal Grad You are welcome. Be sure to subscribe!

[@romandotbsbd]

Thanks for that lower door switch. It solved the problem (most of the other guys point to the fuse).

[@new-knowledge8040]

On the way back from a beer store along with my cart, I picked up someones microwave oven that looked about the same power rating as mine. It was located at the curb for disposal. So I took it home, and all the parts that I needed to fix my own oven were identical and still OK in this roadside trashed oven. That included micro-switches, an AC fuse, and a thermal fuse. Once these used components were installed in my oven, it was back up and working, and still is working. Total repair cost, $0.00. However, years later, the plate rotor motor stopped working. So I took the motor apart and flipped the donut shaped magnet over 180 degrees, and then reassembled the motor. The motor was fixed and has been working ever since. The donut shaped magnet has 4 notches on both sides, but only the notches on one side are being used to lock onto the center nylon gear. Only the notches on one side were worn down, so I now just used the other side instead. Total repair cost, $0.00. This stainless steal oven of mine was a store demo unit, or so they said, and so it cost me less than $45. In truth, its keyboard was only half working. So I cleaned the keyboard electrical contacts, and the keyboard has been working ever since. This oven was manufactured in 2004 and is still running in 2019.

[@esthersandoval1345]

You are incredibly awesome. I only wish I could do that type of repair. I'm a penny saver so I love your total cost of repairs, $0.00.

[@charlesstuart1119]

​@@esthersandoval1345 definitely like it too! 😊

[@craigb.6726]

Wow. Thanks for the video. I knew it was the bottom switch but could not figure out how to remove it. The video saved me. Thanks again!

[@TightWadDIY]

You are welcome! I’m glad it worked for you too!

[@jemaines]

Adding my thanks to you for this video! Over 10 years ago I replaced the magnetron thanks to another guy. You helped me out and saved $ because I was thinking maybe the magnetron again. Replaced the switch and we're back in business!

[@TightWadDIY]

Jesse Maines That’s great! I’m glad you found it helpful.

[@fangykins]

Sweet! You just saved me $600 much appreciated!

[@TightWadDIY]

Fangykins You are very welcome. Thanks for taking the time to comment. Be sure to subscribe!

[@jjmarshik4324]

Thanks! Your video saved me cash and kept our microwave out of the landfill.

[@TightWadDIY]

Jeremy Marshik I’m glad you were able to get it fixed!

[@fraisiperles9257]

Thank you for your video. It's was exactly the problem of my microwave. Waiting for the switch to come in. Thank a lot! 👍

[@TightWadDIY]

Great! Hopefully it works great when you get the switch!

[@fraisiperles9257]

@@TightWadDIY It sure does work now and thanks to you! :D

[@TightWadDIY]

@@fraisiperles9257 Great!

[@RedshiftCindy]

Thank you for this video, works beautifully, the part was 2.33 with tax! Easy fix!

[@TightWadDIY]

That’s great! I’m glad you were able to fix it and that is super cheap!

[@ninagunn395]

Thank you so much! May God bless you for taking the time to do this video to help others!

[@TightWadDIY]

You’re welcome!

[@bosanovaboy]

Thank you. mine is an Emerson and the switch is the top one. Fortunatly once I removed the switch I was able to take it apart and cleaned it. I test it with my voltage meter before I installed it. The whole process took me 30 minutes. Thank you.

[@TightWadDIY]

bosanovaboy Great work! Glad you were able to get it fixed.

[@edkelly145]

Just saved me 1090.00. Works great. Thanks

[@TightWadDIY]

That’s great! Just send me 10% and we will call it even!

[@cynthiaaiken2424]

My instincts have been verified. Thank you.

[@TightWadDIY]

Great!

[@Demidannyy]

Found that one of my switches weren’t working. No continuity indicator when I test it. Nor that the black switch was popping up. Brought 2 of the switches on eBay for 10$! Thank you!!

[@TightWadDIY]

I’m glad you were able to get yours fixed too!

[@lmpnb]

Thank you! I just fixed a 1997 Kenmore microwave - in 2024 - for $7.90. Woohoo!

[@TightWadDIY]

Yes! That’s great!

[@juice-man320]

Good job sir. Nice tutorial.😊

[@TightWadDIY]

Thanks and welcome

[@wrigg5006]

Thanks for the Video! The button on the top switch was worn completely off.

[@TightWadDIY]

W Rigg I’m glad you were able to get yours fixed. You don’t realize how often you use the microwave until it’s broken!

[@shemikahenry3661]

Great job explaining.

[@TightWadDIY]

Glad it was helpful!

[@libaaxalee]

I just ordered a switch, my Samsung microwave is just doing the same thing, hopefully that switch will take care of it. Thank you

[@TightWadDIY]

Wanaaje's Channel It should! Good luck!

[@libaaxalee]

@@TightWadDIY man you save money, got the switch from Amazon for about $6 and that was the issue, thank you so much for your help.

[@TightWadDIY]

Wanaaje's Channel That is great! I love it when people save money!

[@yupyupliketeddy]

@@libaaxalee Could you please share the link for the switch?

[@davec.3198]

I found a faulty switch with your video..thanks! The switch actually worked to some level...the spring inside it was shot so it would not return to the NO position. Had to play with the micro switch to find the fault.

[@TightWadDIY]

Dave C. I’m glad you found your issue and were able to get it fixed. Be sure to subscribe!

[@metfan122164]

Great videos sir! I thought this one diagnosed it however in rewatching it, the problem is not identical. The microwave does not turn on. The light AND the turntable operate, but no function. Sound like a fuse or a door relay problem to you?

[@TightWadDIY]

I’m confused. Please state your issue.

[@josel.dominguez6747]

Exellent video nice and clear and well explain, thanks for sharing and regards,

[@TightWadDIY]

Jose L. Dominguez You are welcome. Thank you for taking the time to leave a comment.

[@piscesdiva50]

Awesome Instructions..i wish that I wasn't afraid to try and fix it on my own..Can you come over?

[@TightWadDIY]

Vera Cheeks Haha. You would be surprised how often I’m asked to fix things for people.

[@braids01]

Just what I needed!! Thanks much.

[@TightWadDIY]

Great! I’m glad it worked for you too!

[@Pablosaurus]

Thanks! I had this exact problem and this was the solution.

[@whonu5]

We replaced the switch, it still didn't work - no turntable, no operation. My husband banged on the front of the microwave in a few places (I swear not an angry bang, lol) and it worked briefly (heated water), but shortly after that the turntable worked but the oven would not go on. Circuit board issue? Thoughts?

[@arciefan]

Wondering if that switch and the light switch are the same part? If so, guess you could do without the light on while cooking, since you rarely look inside while it's cooking anyways, or temporarily do without it, while you locate the best deal on the switch. Nice video!

[@TightWadDIY]

arciefan The microwave needs both switches to function properly.

[@nn-js4yg]

Thanks, mine had the same problem

[@TightWadDIY]

Roger Cook You are welcome. I’m glad you were able to get it fixed.

[@crankijoify]

My microwave has 2 of those in it back to back that are grey in color but everything else looks the same. My question is is bcuz mine has 2 does that mean i would need to replace both??

[@TightWadDIY]

franki ruiz Do you have a multimeter? If so, test them to see which switch is bad. It should switch from continuity to no connection. The other option is to replace both since they are so cheap.

[@jharbo1]

This is the best tutorial! My Sharp Carousel botton switch keeps messing up. Will check to see if the wires are touching. Believe me, I am very careful to not slam the door shut. Is there anything that I can do to SAFELY keep the switch wires from contacting each other?

[@TightWadDIY]

jharbo1 I suggest you cut off the spades and put new ones one. You can bend them a little bit so they are farther apart.

[@new-knowledge8040]

The switch can be damaged, but still work sometimes. The switch is designed to snap into the closed position (or open position if it is a N.C. switch) after the tab is pushed inward to a certain extent. Once this has occurred, it is mostly the internal spring that is holding the electrical contacts together. However, if the switch is damaged, it can end up such that it is only the pressure that is being applied to the switch tab itself that is forcing the electrical contacts together. In this case, the switch is entirely dependent upon the microwave door to doing all the push work, and thus it is not 100% reliable.

[@Raf-c2y]

Mine does everything but heat up. The tray spins, it hums, the light goes on, the clock works, everything works, but it doesn't heat food. Do you know what that might be?

[@TightWadDIY]

Could still be the door switch.

[@Virtuenow]

@3:34 what if I don’t have that screw driver. What did you do there?? What if someone skips that step? Thanks for vid

[@TightWadDIY]

Honestly if you don’t have a screwdriver you should probably get someone else to do the repair. I don’t mean to sound rude but it may be safer. Not discharging the capacitor could result in death.

[@Virtuenow]

TightWadDIY: Thanks. It turns out my screw driver does have rubber on it. But I may have someone knowledgeable to do it.

[@kungfumachinist]

This video was WAY off the mark. There's actually a THIRD switch, that's the one that was broken. I'm just clowning around. This was very helpful. I would have never guessed it was one of these switches. (I almost gave up after testing the 2 door switches and finding them good.) Anyway I actually fixed the switch with a blob of solder, it was an NO switch that was a bit damaged and wouldn't close all the way. Thanks!

[@TightWadDIY]

Haha. You had me at first! I’m glad you were able to get it working again.

[@ggooden11]

Fantastic video

[@TightWadDIY]

Thank you!

[@JeevanlalPatel]

EXCELLENT, SHORT AND SWEET

[@normanMarozva]

Thanks

[@TightWadDIY]

No problem

[@JasonBourne93]

Mine is a GE Microwave. We have power, the light is on, and turntable not spinning. But the timer does count down. I dont hear the magnetron engaging as well. I think its the lower door switch as you mentioned. If the lower switch is faulty it would not give power to the magnetron is that right? But I will let you know how it turns out.

[@TightWadDIY]

It’s a door switch but I can’t say which one for sure.

[@JasonBourne93]

@@TightWadDIY I have been doing without using it this week but I should get to it soon. Thanks very much. Glad we found you.

[@JasonBourne93]

@@TightWadDIY Hello sir! It was one of the door switches like you said. It was the lower one. The switch still got power on the multi meter but it was worn out the plastic thing that pushes down on the button wasnt able to give it enough pressure. It wasnt clicking like the other switches. Thanks you saved me 700$ plus tax. Unbelievable! I owe you some beers

[@TightWadDIY]

@@JasonBourne93 I’m glad it worked for you. There is a Thanks button under the video if you really feel inclined.

[@paulmcmann7082]

Very informative thank you

[@TightWadDIY]

Paul Mcmann You are welcome. I’m glad you found it helpful.

[@seva00793]

Thank you

[@TightWadDIY]

сева соболев You are welcome. Be sure to subscribe.

[@DesignsbyCADPRO]

how much the replacement cos? Are you an electrician ?

[@TightWadDIY]

The part for this repair should be around $10. No, I’m a teacher.

[@elpollolocoguero8183]

Are those switches the same for all microwave brands?

[@TightWadDIY]

No. They aren’t.

[@elpollolocoguero8183]

@@TightWadDIY ok thanks

[@rezahassanzadehgondezli8692]

Very helpful

[@TightWadDIY]

Glad to hear that

[@taco2719]

I changed the switch and magnetron and diode , it’s still not working, why ?????please help

[@TightWadDIY]

There are a variety of possible issues. Those are just the most common.

[@FAMILYFUN-un1zm]

What if the "connector bridge" breaks when pulling wire off terminal or the button? Sorry I don't know the actual name?

[@TightWadDIY]

FAMILYFUN2000 I’m not sure exactly what part you are referring to but it can all be replaced. What is your model number and I will get you a link to the parts list.

[@FAMILYFUN-un1zm]

@@TightWadDIY at the end of each wire is a metal connector .... it broke in half when I was pulling the wire off. Model number is mcm991b

[@TightWadDIY]

FAMILYFUN2000 I assume you just mean the spade connector. You can buy those at any appliance repair shop for cheap. Cut the old broken one off, strip the wire a little, and put the new one on then crimp it with pliers. That may have actually been your issue instead of the switch anyway. Here is a parts list. www.appliancepartspros.com/search.aspx?model=mcm991b

[@FAMILYFUN-un1zm]

@@TightWadDIY Thanks I will look into this

[@jobranjubair2154]

Awesone video. Thank you

[@TightWadDIY]

Jobran Jubair Thanks. I try to be as detailed as possible. Be sure to subscribe!

[@jobranjubair2154]

Definitely. Thank you so much!

[@baskets4moo]

Kudos! It fixed mine!

[@TightWadDIY]

baskets4moo Awesome! Nice work!

[@davelowe-e9j]

We're do u buy switch?

[@TightWadDIY]

I get mine at a local appliance parts house. I’ve seen them on Amazon.

[@bxbz]

If you don’t here it clicking when you press the red button up and down it’s no good!

[@TightWadDIY]

bxbz That is one indicator but some still click when they are bad.

[@bxbz]

TightWadDIY glad you put that in!

[@harryheaton1185]

Thanks....$5.40 to repair mine.saved my bacon on buying a new one....

[@TightWadDIY]

Harry Heaton That’s great! I’m glad it worked out for you too!

[@MadMax-yq9ix]

I need to do this, my microwave isn't that old but it stopped turning and cooking

[@TightWadDIY]

Hopefully you can get it working again!

[@xayidearicarassa643]

Im having issues trying to find the part

[@TightWadDIY]

Did you look on Amazon? I had to go to an appliance parts distributer to find one locally. Try to find out where handymen go to buy their parts in your area.

[@fernesal]

Mine spins and humms but no heat.

[@TightWadDIY]

deepcritik It could be the top door switch.

[@fernesal]

TightWadRepairs If it was the door switch, it would not start or would?

[@TightWadDIY]

Correct. Check the high voltage diode. It powers the magnatron which provides the heat.

[@HaiNguyen-cz8ho]

❤

[@berryboy4520]

Skip to 5 minutes in, first 5 minutes is nothing but waffle, you americans love to talk!

[@TightWadDIY]

BerryBoy I’m glad you found this American video helpful. Thanks for sharing the time for the people who don’t need step-by-step start-to-finish instructions.

[@new-knowledge8040]

Place screwdriver in hand. With screwdriver oriented horizontally, move tip of screwdriver toward screw. Make contact with screw. Turn screw anti-clockwise. Remove s...... .

[@toosexy7955]

Problem with my microwave, ..I baked a sweet potato & it caught on fire & smoked my microwave up, Lights won't come or do anything..Did I burn it up??, I tried a light in plug & it works , So reception works..Will it ever be fixed again..Thanks!

[@TightWadDIY]

TOO SEXY~ Probably so. It's hard to know without seeing it myself.

[@toosexy7955]

thank you!

[@julinesterner5276]

Thank you SO MUCH for this video! I’m a mom who has generally always been the “helper” on repair projects, but now I need to take the lead. My 11yo son and I used your video to walk through fixing our microwave. For $13 we now have a working appliance again - I’m so grateful we didn’t need to buy a whole new microwave!!

[@thanoongiravi4892]

Thanks

[@TightWadDIY]

You are welcome!

[@jessicadelarosamayim]

4 years later still saving families money one microwave at a time! I’ve had mine since 2004 and it gets to live another day. Thank you!

[@TightWadDIY]

Great! I’m glad to hear it helped you!

[@wssr3293]

On mine the panel works but no light or turntable or heat. Could this be my issue too?

[@Warren_L.]

Thank you! You just diagnosed my microwave, and allowed me to fix it. I actually managed to fix the faulty switch, so it's working again now. But I've ordered new switches to replace the wonky one. Total cost = $8.99!! You just earned a new subscriber!

[@TightWadDIY]

That’s great! I’m glad it worked for you too!

[@davidkoch2495]

Wonderful explanation and visuals showing the basics of microwave switches and how to access and diagnose them. My microwave was a different make (Whirlpool) and model but the general layout and concept was similar. I replaced one switch for $8 and my eight year old microwave works like new. Saved me time and money:) Thank you!

[@TightWadDIY]

Thank you for the thoughtful comment. I’m glad you were able to get yours fixed too! Be sure to subscribe.

[@MM-rz9qb]

Thank you for the video. This fix resolved my issue. The switch was actually just loose. So didn't even need to purchase a switch. You have made me so happy. I so do appreciate you posting this video.

[@TightWadDIY]

Glad it helped

[@alanatzenhoefer5296]

Thank you for making this video. I used your technique to remove the outer safety screws and for removing/testing/replacing the door switch; which solved my problem. Much appreciated!

[@TightWadDIY]

That’s great! I’m glad you have it fixed!

[@b18c1iv]

Thanks! I was able to fix mine with this. My bottom switch wasn't working, I was actually able to open the switch without breaking it and saw that the metal contact was not making a good enough connection to send current through. I ended up bending the contact slightly and it now makes good contact again. Put a little glue to close the switch up and the microwave works perfectly again.

[@kenan2950]

Worked like a charm for my Kenmore microwave! Ordered two new switches from Amazon and replaced top and middle switch and we're back to working order. Thanks so much for the tutorial! Kept this microwave out of the landfill!

[@TightWadDIY]

That’s great! I’m glad it worked for you too!

[@shamainj27]

How did you get you keenmore opened?

[@mrh4ppy]

Thank you! My switch ended up being fine in terms of continuity, but I noticed that the spring was shot, so the door latching mechanism couldn't engage the switch. Finding an appliance store was the hard part 😄

[@TightWadDIY]

I’m glad you figured it out. It is crazy how hard it is to find these parts locally. I have to drive 45 min for appliance parts if I don’t buy online.

[@mizlola68]

Thank you! Thank you! Thank you! You just saved me $500!!! I, YES- me myself and I - just repaired my microwave! I changed out the door switch, but the problem remained. I noticed the top switch connectors looked funky. I swapped out that switch as well, and we are rocking and rolling! I have an LG LMH2016ST

[@TightWadDIY]

Lola Lewis That’s awesome! I’m so happy to hear you persevered and fixed it!

[@geodavid51]

Thanks, this video immediately identified the broken component which I replaced. There was a door switch on the bottom but the actual culprit was the switch on the top. I disconnecting the wires from the switch and checking for continuity/door operation before removing the switch. By the way, the bad switch was easily identified even without a meter because the actuator tab did not extend out of the switch housing as it should.

[@TightWadDIY]

That’s great! I’m glad you got it working.

[@homeluangaphay2801]

I just repaired my microwave by watching this video. Thank you for saving me money and what to do.

[@TightWadDIY]

Glad I could help!

[@nigst2]

thank you so much for posting this! This was just what the doctor ordered, fixed my microwave for 7 bucks!

[@TightWadDIY]

Nicola Greco That’s awesome! I’m glad you were able to get yours fixed!

[@jasonmartindale3171]

Thank you, spent $10 on switches and had it fixed in about 10 minutes, instead of $150ish on a new microwave. Wish i would have knew about this years ago.

[@TightWadDIY]

That’s great! I’m glad it worked for you too.

[@RVCJJ3J]

Just done very well. Steps and instructions done with clarity. If you need to change a switch on your microwave and you can’t do it after(while) watching this then you really need to take it to a professional because there’s no other video that can help you. Good job poster.

[@TightWadDIY]

RVCJJ3J Thank you for your kind comment. I try to stay on topic and provide clear instructions in all of my videos. Be sure to subscribe.

[@stevengreener2941]

Hey - I followed your video tutorial and repaired my microwave for $6.50. You’re the best!

[@TightWadDIY]

Steven Greener That’s great! I’m glad you found the video. Be sure to subscribe!

[@brucefrazier5025]

Thank you, Mr TightWad! These were the same symptoms that my microwave was exhibiting so I followed your instructions and BAM! $5 later mine is fixed! Mine is a different brand but it's basically the same inside. It was such an easy fix. The hardest part was getting the case off. I bought a security torx bit which fit all but 2 of the screws (?) I was able to loosen one of them with channel locks but the last one I had to saw a slot with a hack saw. It was worth the effort to fix it myself for next to no cost! Thanks again for the excellent video!

[@TightWadDIY]

Great! I’m glad you figured it out and got it working again!

[@danbassininski8158]

Just wanted to thank you. I spent $5.00 on the switch and it saved me $200. I found an easier way around the security torx screws. I used a tiny flat blade screwdriver that fit up against the protruding pin and into 2 of the 6 corners.

[@TightWadDIY]

That’s great! I’m glad you were able to get yours fixed. Nice idea on the security screws.

[@GM-cr4yk]

Thank you very much for this video. My Dacor DCM24S had this same problem. Light and fan come one, but no turntable or heat. I followed your steps and fixed it in less than an hour. In my case, the switch was not entirely defective. I tested the switch with a multimeter and found that the switch would fail if the little orange button was pushed in all the way, but it works if you let off the button a bit. All did was shave down the little orange button about 1 to 2mm so the door mechanism would not push it in all the way, and now it works! I would also like to add, for anyone doing this, be very careful when you bend the clip that is holding the switch in. I pushed too hard and snapped off the clip. I was able to re-secure the switch by wedging a small piece of wood under it, wedged between the switch and bottom panel of the microwave interior.

[@TightWadDIY]

I’m glad you were able to get yours fixed. If I were you, I would go ahead and order a back up switch in case yours fails.

[@tealpaintbrush1797]

Thank you for the amazing video. It was the exact same switch that caused the issue on my end as well. It is back to normal after replacing it. Since I already had the microwave opened, I replaced the other two switches as well for this old microwave. Your video saved me easily $300 plus the stress. Thanks again. Please continue making such amazing videos.

[@TightWadDIY]

That’s great! Happy to help!

[@asts7910]

Most wonderful, accurate and to the point tutorial. My Panasonic microwave gave out on me yesterday with same exact problem (light on, no turntable turning, no heating). I am gonna try to fix it this weekend. You are awesome man!!!✌️👍

[@TightWadDIY]

I’m glad you found it helpful!

[@Virtuenow]

What happened? I have Panasonic.

[@TheFluffernutter12]

Tysm you basically fixed my microwave amazing video and thanks for pointing out the step by step it’s was amazing

[@TightWadDIY]

You’re welcome. I’m glad it worked for you too!

[@tipsclubs01]

Great concise and safety oriented Video. The only thing I wish you'd have done was test the new Switch, so we could see what happens to the Good Switch when tested. My microwave is a cheapie Hamilton-Beach Walmart one. Everything seems to work, turntable, light, etc. except it doesn't heat. Took the top off, did as you said, discharged the condenser. There were two components, about the size of a Penny, screwed with 2 screws to the metal frame inside like grounding it, with two terminals sticking up and ganged together with wiring. On one of the terminals, on one component, was burnt, still attached, but noticeably burnt. Don't know what these are, but being burnt, I would say would be the best place to start. The 2 components look like some kind of Diodes. I did a continuity check across the two terminals on the one Diode, and there was continuity between both. Will check the other diode and see if there is continuity between both terminals and will probably give me a clue to see if the burnt one is bad. These could be some type of double fuse system. Great Video, you did a Good job. Thanks.

[@moosthi]

thank you for the video. This helped me fix my GE profile microwave - the bottom (primary interlock switch) turned out to be the culprit that was causing multiple problems

[@TightWadDIY]

moosthi I’m glad you were able to get yours fixed. Thanks for sharing.

[@dskye2634]

Same here.. I actually toggled the door. shut it and now it turns... thank you

[@jacobschwen294]

My GE microwave is only 4 years only and it stopped working as the video described... I tried everything then I happened to lift the door and found it sloppy and loose on the hinge pins. It looks as if a spacer has broken on the bottom hinge pin that made the switches not meet correctly. I placed a small zip tie around that bottom hinge pin and I'm back in business! 😂

[@TightWadDIY]

Nice job!

[@personel7620]

thank you so much. I had the exact same problem and your video helped fix it in 5 minutes.

[@TightWadDIY]

Great!

[@christopherspino3881]

Excellent explanation and video. Very helpful. Thank you.

[@TightWadDIY]

Glad it was helpful!

[@wayngo9693]

Thank you so much ,you just saved my relationship

[@TightWadDIY]

Glad I could help

[@codebrker24]

Thank you for this video. I was able to fix our microwave and save a great deal of money. $7.00 spent saved hundreds. I also did the technique to remove screws and it was very easy to remove cover.

[@TightWadDIY]

That’s great! I’m glad you were able to get it fixed!

[@Nirrrina]

Thank you. I'm pretty sure the door latch switch is either going bad or was stuck from dirt. Because I just poked the outside & it started working again. But when it inevitably goes out I'll try here first instead of just getting another even though it's just an inexpensive freestanding model.

[@TightWadDIY]

Yes! It’s always better to fix it if it’s a cheap part!

[@billybassman21]

I'm having this same issue, but it is intermittent. I'm going to troubleshoot this as soon as I can. BTW, the cap doesn't have power because of the bleed resistor that goes to the metal body.

[@Animalit55]

Thanks so much, all I did was play with the switch a little and it worked

[@TightWadDIY]

That’s great! I’d go ahead and order one just in case.

[@renehasp]

You are my hero!!! Saved us $700.00

[@TightWadDIY]

Yay! Glad it worked for you!

[@lilj1148]

Good help, fixed my microwave for only 11 bucks

[@TightWadDIY]

That’s great news!

[@charlesmurphy2481]

Perfect. Thanks! $5 switch or $1100 convection microwave oven? TightWads win. FYI - On my GE unit, it was the top latch switch.

[@TightWadDIY]

Yes! I’m glad it worked for you too. Thanks for the info about the GE.

[@pufffdragon]

Do any of those switches work for the convection part of a microwave not heating? Or is that something completely different. Thanks