The Best Overlocker Tension Chart Video You Need to Watch any machine #overlocker #abisden #serger kzbin.info/www/bejne/l4vLZ4yppNqjgKc
@Creativjess Жыл бұрын
What an incredibly informative video!! Thank you so much!!
@AbisDen Жыл бұрын
You are so welcome!
@Soloniite3 жыл бұрын
great attention to proper sewing and the kitten🥰🐈⬛
@tiarayong53772 жыл бұрын
Thank you so much, this helped me to understand my differential was up too high for the fabric I'm using causing the fabric to pull to the left.
@AbisDen2 жыл бұрын
Wonderful!
@liahkamupita36443 жыл бұрын
I absolutely love your tutorials
@aliceannjo3 жыл бұрын
I struggle with my serger tensions. This is so helpful for trouble shooting. I have been setting all the tensions at the same time and getting not so good results. I like the chart for reference. Thank you for your time and knowledge.
@rourkuscreations3 жыл бұрын
Genius way to diagnose a problem xx
@nimuedevi2 жыл бұрын
Super helpful video! Great idea to make a troubleshooting chart for all the different threads.
@deborahspooner80462 жыл бұрын
So detailed, very helpful, requires patience.
@AbisDen2 жыл бұрын
Thanks Deborah ✨
@Max_62002 жыл бұрын
Love the way you explain nuances, abi, you've been of great help to me :)
@AbisDen2 жыл бұрын
Very happy to help 😊😊
@myfrugalraggylife71042 жыл бұрын
Love your little helper !
@genafuscaldo11217 ай бұрын
I ❤ your Kitty !!!!!!
@AbisDen7 ай бұрын
Awww. So do I. She’s a treasure x
@ptoste15 ай бұрын
Omg! I have so much to learn with you! I’m processing your tutorial. Thank you so much 😊 ❤❤❤❤❤❤❤❤❤❤
@AbisDen5 ай бұрын
You are so welcome!
@Alegria.penarth Жыл бұрын
Great video, thank you. I’ve learnt so much watching your channel
@AbisDen Жыл бұрын
You are so welcome!
@chocjamie Жыл бұрын
This is so clear to understand, thank you!
@AbisDen Жыл бұрын
Thank you x
@richyjames13783 жыл бұрын
love the videos abi ... and ohhhh the cats nicked the thread haha
@leedavis59583 жыл бұрын
Great video. Thanks Abi, So really helpful.😘👍
@christinewotherspoon66552 жыл бұрын
Great tutorial and I’m definitely going to make tension tables 👍
@cathtaylor27713 жыл бұрын
Thankyou loads Abi, the differential feed is my problem. Sorted now and perfect xx
@AbisDen3 жыл бұрын
🙌🏽💪🏽
@pastelskiesz127717 күн бұрын
Hi thank you for the video. When would you have to adjust the stitch length and the knife cutter? I've got my stitch length at 3 and knife on 5.
@bits-and-bobs2 жыл бұрын
You have a cute furry helper there 😹
@colin1019813 жыл бұрын
Thanks Abi, really helpful tutorial. I actually had one of the problems you talked about today! Sorted!! Looking forward to seeing the app.
@melissaturk60543 жыл бұрын
Fab! Thank you Abi for your clear and concise instruction. Can you direct me to the instructional video of you making these charts please 😬 thank you
@AbisDen3 жыл бұрын
Here you go : kzbin.info/www/bejne/l4vLZ4yppNqjgKc
@melissaturk60543 жыл бұрын
@@AbisDen thank you my lovely x
@AbisDen3 жыл бұрын
Have fun with it.
@pastelskiesz127717 күн бұрын
How do you know if knife setting is too high or low on over locker? Also did you use 2 jersey / ballpoint needles for this knit fabric? Tjanks
@joshuatang40152 жыл бұрын
Hi Abi, could you please do a tutorial like this for the 4 way stretch spandex ?
@sarahmiddle50283 жыл бұрын
Fantastic tutorial Abi, thanks so much. (And you forgot to put the link to the website for your new app like you said you would!)
@AbisDen3 жыл бұрын
There now x thank you !!!
@jaynephillips4720 Жыл бұрын
I've seen you use quite a few overlockers which would you recommend
@AbisDen Жыл бұрын
It depends on your budget really.great video idea
@annekent73502 жыл бұрын
Hi Abi, that was so interesting! My problem is that there is no stretch in my seams, you can feel the threads pulling within the seam. Any ideas?
@ushasangeet58868 ай бұрын
Hi I have got baby lock something gone wrong not moving the material and breaking the needle and doesn't gives proper stitch ,please help me
@juliemenezes2544 ай бұрын
Is your presser foot down? If it's up the fabric won't feed.
@moiraberniegatt9491 Жыл бұрын
Abi when you stitch you don’t have to pull the treads out the back. Mine stick and bunch up on the stitch finger. Fix?
@AbisDen Жыл бұрын
The needle plate fork could be bent out of shape.
@moiraberniegatt9491 Жыл бұрын
@@AbisDen it is new and I didn’t realise that the presser foot pressure was too high. I didn’t even realise it had numbers so when I loosened it off the threads worked fine. Many thanks for all of your material. It is super helpful.
@AbisDen Жыл бұрын
Thank you for letting us know what worked for you. It’ll help others for sure.
@christinewotherspoon66552 жыл бұрын
The lower looper thread keeps jumping out and I’m repeatedly rethreading? Tensions are all at 4 as machine less than a year old. Any ideas?
@lorenzosousa19493 жыл бұрын
Abi my overlocker “walks” on the table when i’m in full speed what can i do to avoid that ?
@djunabug2 жыл бұрын
I moved to a sturdier table, and added a thin non-slip mat under the serger. I had some spare EVA foam on hand - just 2-3 mm thick, leftover as underlayment for vinyl flooring.