Easy How To DIY Subwoofer Box Build, DETAILED and UNDER 25min

[@BrielyJeanFowler]

I like this dude he’s definitely had some experience in construction

[@chrisrandich6301]

Love the truck. Coincidence that I am watching this in the middle of November a year after upload.

[@Okla_Soft]

Nice build homie, about to make a truck box for a Silverado and now I know I can do it!

[@bellapayne8064]

Amazing video bro

[@lawrencevw_mk1_velociti928]

The exhaust on that truck 😭😭😭😭😭😭 gives me life

[@jason3000tt]

thanks for sharing bro..... really helpful.

[@MrCaymantico]

Nice job cant wait to hear how it sounds.

[@jasonkubik3465]

installed or finished product video would help a ton.... Looks pretty good if it fits under the seat correctly.

[@chasehymas1528]

i'm 2 mins in and ive diecided Id rather do my muffler first haha truck sounds good

[@bbay1977]

That was a 200 IQ idea about the last step with the black sealant. I'm going to build me a down firing box for my home theater. Thanks for the content and it helped me out a lot.

[@jtpbuildz959]

Glad to help, I too just started building off of what i watched and researched, best of luck!

[@rodneyhafer4548]

@JTP Buildz loved the video, just recently purchased a 2014 f150 and going to build a box. Just a long shot, but can you send a copy of the diagram and measurements

[@bbay1977]

@@rodneyhafer4548 it's in the video if you just pause it. I don't remember if it shows where the cutouts were for the speakers were at though. I forgot to mention though with the price of wood now, it may be as cheap or cheaper to buy a prefab box. Might want to check their prices before building one.

[@HighTimesTrader]

Here's the 300 IQ idea. Use liquid nail instead of wood glue and silicone caulk

[@Mill-on-da-track]

Man that 5.0 sounds so much better than my 4.6 lol💪🏾

[@ariellesayshello]

YEAAAAHHH keep posting!!!!

[@rich-garland]

Nice box / project mate , have you made a final sound vid on how the box sounds ?

[@jorgepizarro3327]

Here's a tip for anybody building custom enclosures: Have Lowe's or home Depot cut the wood. Keep up the great work 💪🏾😎

[@jtpbuildz959]

Absolutely, I dont have the best tools but regardless, its easier to have the big box store cut them to length to make life much easier

[@jorgepizarro3327]

@@jtpbuildz959 and I'm with you on that one hundred percent. Keep up the great work again. I'm going to be posting some more box build on another channel hopefully in the future

[@theshark2804]

JTP Buildz my wife got me a table saw for fathers days. Now I’m trying to design a box for my nova

[@jorgepizarro3327]

@@theshark2804 can't wait to see it

[@heatheaton40]

Did you get a video of it installed ? How it turn out

[@jtpbuildz959]

I havent uploaded it yet, but I will soon, thanks for watching and keep an eye out for it!!

[@Mariovic20]

watching this video makes me do the Tim Allen tool man grunt!🤣🤣

[@bigdaddya735]

Man I need to get a couple of those work benches 😆 🤣 😂 great 💡idea

[@TheBigsmurf117]

For those with bad eyes; what’s the dimensions you have written down? I imagine you compensated for the 1/2 on ever my cut! Great video man thanks.(2 years late I know lol)

[@coreyferrell1886]

What kind of saw is that,and how much do it cost?

[@papergatorzfedducca7998]

New subscriber bro!!

[@jtpbuildz959]

Thank you!

[@alexismorales5378]

Can you make a update video on the sub box installed 🤘

[@jtpbuildz959]

A full update and walk through of everything I've done to this truck is in the works, stay tuned;)

[@alexismorales5378]

@@jtpbuildz959 Awesome bro!!🤘

[@wrenched90405]

love that ur doing this on hay bales - just like the rest of us - sooo tired of a dude with $50K of pro tools showing us ‘diy’!

[@LSCHEVYRYDER254]

subbed im also a diy guy so love seeing others do it and learning things from them

[@randy2761]

Great video! Great detailed instructions. Very helpful and easy to follow. 👍🏼👍🏼

[@BicdaCruX]

So how did it come out?

[@robertellis9310]

Are you in Dallas Tx

[@audioassistant9026]

COOL

[@dexterdriver1075]

I know this is a old video but do u remember how many sheets of wood it took and size or the 45’s u used to put in corners

[@jontowers4841]

What 10's would you suggest in slim line

[@jtpbuildz959]

I originally was shopping for kickers but the guy at the audio shop set me up with some pioneers and I LOVE THEM!! They hit hard on bass, but still sound great with other types of music. I don't think you can go wrong with either tho

[@petergaul8636]

Is it possible to put 12s under the F-150 super crew cab back seat

[@jtpbuildz959]

Yea, for sure, I just cut the box for 10s, I could have easily cut 12's in the box as well. The 10s sounds great tho, totally up to you

[@petergaul8636]

Thanks

[@davidajenningsjr]

New subscriber here. What's the airspace per speaker? Also how did you get the bevel on the back and front pieces? Thanks

[@jtpbuildz959]

Honestly, I don't know, I just built the biggest area box with the space provided. I shopped for weeks and couldn't justify the money for a pre-built box so I researched and researched and threw it together. It is STILL hittin hard and bumpin, so glad I diy'd it and didn't buy.

[@jtpbuildz959]

As far as the bevel, I'm not sure I fully understand, but I'll take a swing at it: 1. The bevel is 2 measurements; one from the height of the back the seat to the floor, and then another measurement from the front of the seat height to the floor. 2. The side box peices were purposely cut higher to act as a brace/air travel for the subs. Im no professional but i was trying to leave space for the air escape/hit

[@dunerinaz]

Only thing I would've changed is cutting out the center of the brace to allow airflow from side to side.

[@petergaul8636]

How did it turn out what did it look like

[@jtpbuildz959]

I'm going to do another vid to show the end result this week, thanks for watching!

[@jamesswain2923]

I have a question ⁉️⁉️⁉️⁉️. I have a 2003 GMC 2500 crew cab. There are so many steel bars under the seat any idea how I can make a under the seat box. Thanks

[@Dubwear7]

I love the video and the build. Very detail and DIY freindly! @20:51🖕🏻sorry...#classic🤣😂

[@jtpbuildz959]

Haha, didnt even realize! Thanks!!

[@joshsmith6946]

You think I can build one for Toyota 1994 pickup not bareley any room behind seat

[@jtpbuildz959]

It all depends on the room you have to work with, but I bet you could figure something out

[@johngray2526]

Can't see the writings on your plan do you have a link for it so I can enlarge it on my phone I don't have access to a computer

[@juggernautxtr]

wish my box was going to be that easy.... 2 15's with 8 cf of air space in the trunk.

[@stevemcgowan3017]

Hi can u use a fosgate p1 sub 10 with a jbl cs10 in my diy box under seat have kenwood ps200 amp .steve

[@jtpbuildz959]

I'm no audio expert, but if it fits let er rip! I did consult a local audio shop for fitment of the box i wanted to build and my end goal of hard hitting subs

[@dannyr1187]

What’s the air space you have?

[@TheCANTU]

Bro what do you think about fitting 3 12" sub's in a box like that in the video. ported or close.. plz help me out guys what u all think is for a single cab truck we are running 2 12 skar's it sounds real good but I want 3 plz let me know if it works or is 2 tight for the space for the sub's thanks alot guys thanks 🙌🙏

[@jtpbuildz959]

I'm no expert, but i think 3 12's would be too much work for end result. the 2 10's I installed is already pushing the limit (from what I am told). But i will say they sound crisp and heavy so who's to say;)

[@mathewmickle3116]

SUB'D I DIY WITH THE TRUCK A LOT. JUST HOOKE UP A JENSEN FLIP OUT SCREEN RADIO AND A BACK UP CAMERA

[@wabicw]

All these comments on airspace and calculations. blah...blah.. Dude just free-handed a mitre cut on a sketchy ass table saw. no guards, riving knife, mitre guage, fancy miter sled ..just blade up and lets go son...WHAT....

[@loganryan1317]

But how did you measure the air space?

[@808chevykev]

Internal measures: height x width x depth ÷1,728= volume in cubic inches.

[@benharman7486]

You should post how it looks now

[@jtpbuildz959]

Yessir! Thats a great idea, didn't even realize I never added that, will do! Thanks for watching

[@mantejsandhu3038]

What exhaust is that?

[@jtpbuildz959]

Corsa, I have a video of it, still loving it!!

[@user-my5nr3il3q]

Why upload a video if you're not going to post an update? Or show how it sounded, looked with subs in...

[@donearl6675]

👍👍❗

[@arnoldcollins9485]

Can you make me one

[@daltonwarmbrodt7022]

You should have measured from the center of the screw

[@jtpbuildz959]

Right you are, live and learn!! haha thanks!

[@asherdie]

Hardboard (HDF) when I need thin but stiff.

[@anchenz0787]

20:50 XDDDD

[@AustinB3.6R]

Not good to run your truck like that when the engine hasn’t even warmed up yet

[@davidwojciechowicz9126]

I think your dad has a louder system

[@kabarrion]

Rona

[@marcusgray-w7e]

I'd like to see you wearing a dust mask next time, especially while using the router. Mdf has formaldehyde in it, not the best for your lungs, as me how I know

[@Woozy91]

Yeah? What's the air space per sub? Throwing pieces of wood together isn't "building a box" ...

[@jacobhope7758]

shut up

[@walfrirodriguez3628]

Haters dam it good bro